Hard-to-Find Fastener 014973259457 1/4-Inch x 1-Inch Hex Lag Screws, 100-Piece
- Not all fasteners are applicable for all applications so be certain to test thouroughly and get the opinion of a licensed building or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finsh. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. We also sell coated and stainless products for additional rust resistance. We stock a wide variety of fasteners ideal for many applications arround the home, farm, business, automotives, and in industry.
National Hardware V2151 3/8″ x 4-1/2″ Lag Screw Eye in Stainless Steel
- An industry-leading set of screw eyes in a host of sizes are offered in zinc-plated with proprietary weatherguard, which has a three times higher corrosions resistance than the competition. Along with zinc-plated, there is a strong contingent of solid brass and stainless steel screw eyes available. With over a century of service national is committed to maintaining the highest level of product quality, innovation and manufacturing technology. Whether for home, farm, builder or industrial customers, national has all the right hardware in the sizes and finishes you need. These products will not corrode or rust when exposed to the weather. Providing latching and fastening options for all of your indoor and outdoor uses. Utilizing 300 series stainless steel with 18% chromium, which gives the corrosion protection as pure chromium in chrome plating.
Panorama Lag Screw Hand-Crimp Swage Stud for 1/8″ Cable Railing Stainless Steel T316 Marine Grade (Lot of 10)
- Swage lag screw for 1/8″ cable hand swage stainless steel t316 marine grade. Overall length = 3-5/8″, thread length = 1-1/2″, thread diameter = 1/4″, pilot hole size = 1/8″. These high-quality stainless steel fittings surface mount a traditional diy cable railing into wood. T316 marine grade stainless steel for maximum durability, strength and weather protection. Save $10 on these terminals when you purchase 1 or more reels of 1×19 1/8″ stainless steel cable by panorama cable & hardware.
The Hillman Group 230373 Truss Head One-Way Lag Screw, 5/16-Inch X 4-Inch, 50-Pack
- They are used with a lag shield and lag screws can be used in masonry applications. Lag screws are used for directly fastening into wood surfaces. One way lag screw, when installed cannot be removed by conventional tools providing security from someone trying to take it apart.
Hex Lag Screws Hot Dipped Galvanized 3/8″-7 x 7″ – Qty-25
- These fasteners are clearly “screws” when defined by the machinery’s handbook distinction the term “lag bolt” has been replaced by “lag screw” in the machinery’s handbook. Lag bolts, also called lag screws, are basically “large wood screws”. However, in the minds of most tradesmen, they are “bolts”, simply because they are large, with external-hex heads in the united kingdom, lag bolts/screws are known as coach screws. The head is typically an external hex the materials are stainless steel for corrosion resistance lag bolts are used to lag together lumber framing, to lag machinery feet to wood floors, and other heavy carpentry applications.
Stanley National Hardware 2150BC 3/8″ x 8″ Zinc Plated Lag Screw Eye
- Providing latching and fastening options for all of your indoor and outdoor uses. Whether for home, farm, builder or industrial customers, national has all the right hardware in the sizes and finishes you need. Zinc plating offers corrosion resistance for all of your functional hardware needs. With over a century of service national is committed to maintaining the highest level of product quality, innovation and manufacturing technology. An industry-leading set of screw eyes in a host of sizes are offered in zinc-plated with proprietary weather guard, which has a three times higher corrosions resistance than the competition. Along with zinc-plated, there is a strong contingent of solid brass and stainless steel screw eyes available.
Spax 4581020701005 1/4 x 4″ T-Star Drive Washer Head Yellow Zinc Powerlag Screw (50 Pieces per Box)
- The trend setting low profile built-on washer head design offers a contemporary and sleek finished installation excellent draw down strength without the need for a separate washer delivers superior clamping ability and a easier installation. T-star plus head provides superior bit engagement better bit engagement means quicker installation with less effort. Heat treated grade 5 durability subjecting the screw to heat treating gives greater strength and reduces breakage. The yellow zinc coating protects the fastener for interior use so your project will last. Check out our threads our patented thread technology allows the screw to be driven faster, is easier to install, and reduces splitting in wood let spax take some of the hassle out of your next project.
The Hillman Group 230060 Hex Lag Screw, 5/16-Inch X 3-1/2-Inch, Zinc, 50-Pack
- The hex head is six-sided and ideal for easy driving and quick installation. They are used with a lag shield and lag screws can be used in masonry applications. The threads on lag screws are designed to embed into the wood, rather than relying on a nut to secure the connection. Hex lag screws are used for directly fastening into wood surfaces.
Hard-to-Find Fastener 014973150495 Hex Lag Screws, 3/4-Inch x 10-Inch, 10-Piece
- We stock a wide variety of fasteners ideal for many applications arround the home, farm, business, automotives, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finsh. We also sell coated and stainless products for additional rust resistance. Not all fasteners are applicable for all applications so be certain to test thouroughly and get the opinion of a licensed building or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel.
The Hillman Group 230021 Hex Lag Screw, 1/4-Inch X 3-Inch, Zinc, 100-Pack
- They are used with a lag shield and lag screws can be used in masonry applications. The hex head is six-sided and ideal for easy driving and quick installation. . The threads on lag screws are designed to embed into the wood, rather than relying on a nut to secure the connection. Hex lag screws are used for directly fastening into wood surfaces.
The Hillman Group 832038 5/16 x 2-1/2-Inch Stainless Steel Hex Lag Screw, 25-Pack
- They are used with a lag shield and lag screws can be used in masonry applications. The threads on lag screws are designed to embed into the wood, rather than relying on a nut to secure the connection. The hex head is six-sided and ideal for easy driving and quick installation. Hex lag screws are used for directly fastening into wood surfaces.
The Hillman Group 852519 5/16 x 1-1/2″ Hex Lag Screw- Black Finish 6-Pack
- The hex head is easily driven with simple wrenches and requires minimal clearance above the fastener. Hex lag screws are used to fasten ornamental strap and t-hinges and other gate items. Decorative black finish is for exterior applications.
The Hillman Group 47867 1/4-Inch x 2-Inch Star Drive Construction Lag Screw with Truss Head 1000 Hour Bronze Ceramic Coat, 50-Pack
- Chances for splitting wood are greatly reduced by the patented cross-cut threads and the wood biting cut point. This products has features that are both impressive and unique. These two features combine to prevent wood splitting by grinding wood and removing fibers from the hole. Topping the list is the new “star drive” technology which virtually eliminates campout for a smooth, effortless drive every time. .
The Hillman Group 230045 Hex Lag Screw, 5/16-Inch X 1-1/2-Inch, Zinc, 100-Pack
- . Hex lag screws are used for directly fastening into wood surfaces. The hex head is six-sided and ideal for easy driving and quick installation. They are used with a lag shield and lag screws can be used in masonry applications. The threads on lag screws are designed to embed into the wood, rather than relying on a nut to secure the connection.
Hard-to-Find Fastener 014973455590 Hex Lag Screws (8 Piece), 3/8 x 4″
- Not all fasteners are applicable for all applications so be certain to test thoroughly and get the opinion of a licensed builder or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finish. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. We stock a wide variety of fasteners ideal for many applications around the home, farm, business, automotive, and in industry. We also sell coated and stainless products for additional rust resistance.
The Hillman Group 47879 5/16-Inch x 6 Star Drive Construction Lag Screw with Truss Head 1000 Hour Bronze Ceramic Coat, 60-Pack
- This products has features that are both impressive and unique. Chances for splitting wood are greatly reduced by the patented cross-cut threads and the wood biting cut point. These two features combine to prevent wood splitting by grinding wood and removing fibers from the hole. . Topping the list is the new “star drive” technology which virtually eliminates campout for a smooth, effortless drive every time.
The Hillman Group 230095 Hex Lag Screw, 3/8-Inch X 4-Inch, Zinc, 50-Pack
- The threads on lag screws are designed to embed into the wood, rather than relying on a nut to secure the connection. Hex lag screws are used for directly fastening into wood surfaces. . They are used with a lag shield and lag screws can be used in masonry applications. The hex head is six-sided and ideal for easy driving and quick installation.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
