18 Top Hydraulic Crimping Tools

 

RIDGID RP 340-B Press Tool - 43348 Hydraulic Crimping Tool Jaws Not Included - ProPress Tool Jaws PureFlow MegaPress Standard Series Jaws and Rings Compatible Cordless

RIDGID RP 340-B Press Tool – 43348 Hydraulic Crimping Tool Jaws Not Included – ProPress Tool Jaws, PureFlow MegaPress, Standard Series Jaws and Rings Compatible (Cordless)

RIDGID RP 340-B Press Tool – 43348 Hydraulic Crimping Tool Jaws Not Included – ProPress Tool Jaws, PureFlow MegaPress, Standard Series Jaws and Rings Compatible (Cordless) - Improved ridgid pressing tool design is 30% smaller to increase maneuverability and a a 17% lighter tool reducing operator fatigue. Led-light built into the pressing tool for continued pipe joining operations of this hydraulic crimping tool in no or low-light environments. Compatible with all ridgid standard series jaws with up to a 4 inch capacity for copper / stainless steel or 2 inch pex including ridgid propress, megapress, pureflow, xl-c, and press snap. Cordless hydraulic crimping tool uses powerful an 18v advanced lithium 4ahr battery to produce 400 presses per charge for more uptime. At 42,000 cycles it’s the longest service interval in the industry and 31% longer than previous models.

 

Greenlee HK1240 12-Ton Manual Hydraulic Crimping Tool 165-Inch 42mm Opening

Greenlee HK1240 12-Ton Manual Hydraulic Crimping Tool, 1.65-Inch, 42mm Opening

Greenlee HK1240 12-Ton Manual Hydraulic Crimping Tool, 1.65-Inch, 42mm Opening - Smaller and lighter than competitive tools. Greenlee hk1240 specificationscapacity, ascr terminals 1033 kcmil (mcm)capacity, ascr tension fittings 477 kcmil (mcm)crimping force 24,000 lbs (106 kn)for industry “u” type dies with 1. The outer layer is black and the inner layer is red. Crimping heads rotate 360°. Two-speed pump to reduce cycle time. Greenlee hk1240 featuresnew head designs result in lower weight and improved durability, tested to 50,000 crimp cycles. 65″ (42 mm) openinggreenlee hk1240 includessteel carrying case. Covered head models have two layers of pvc that total approximately 3/16″ (4. Ram automatically retracts when crimp cycle is complete, a greenlee exclusive. 8 mm) thick.

 

Burndy Y81KFTMBH Dieless Hypress 4-Point Remote Hydraulic Power Operated Crimping Tool Flip Top Head 6 Ton Crimp Force 54 Width 139 Length 10000 psi

Burndy Y81KFTMBH Dieless Hypress 4-Point Remote Hydraulic Power Operated Crimping Tool, Flip Top Head, 6 Ton Crimp Force, 5.4″ Width, 13.9″ Length, 10000 psi

Burndy Y81KFTMBH Dieless Hypress 4-Point Remote Hydraulic Power Operated Crimping Tool, Flip Top Head, 6 Ton Crimp Force, 5.4″ Width, 13.9″ Length, 10000 psi - 360-degree inspection allows for visual verification of proper crimp. Remote hydraulic crimping tool for use with a range of copper and aluminum conductors and connectors in conjunction with a 10,000 psi hydraulic pump. Dieless system eliminates the need for separate die sets. Provides 6 tons (54 metric tons) of crimping force. Ul listed and csa certified crimps with made with burndy hylug and hylink compression connectors.

 

Gowe Hydraulic Crimping Tool Hydraulic Crimping Plier Manual hydraulic clamp wire crimper Crimping Range Cu 10-120mm2 wire crimper connection plier

Gowe Hydraulic Crimping Tool Hydraulic Crimping Plier Manual hydraulic clamp wire crimper Crimping Range Cu 10-120mm2 wire crimper connection plier

Gowe Hydraulic Crimping Tool Hydraulic Crimping Plier Manual hydraulic clamp wire crimper Crimping Range Cu 10-120mm2 wire crimper connection plier - Crimping range cu 10-120mm2 crimping force 12t crimping type hexagon crimping stroke 14mm length 425mm weight approx. 0kg package plastic case standard accessories 10, 16, 25, 35, 50, 70, 95, 120mm2 features hydraulic crimping is a processional tool for crimping copper and aluminum lugs with different types, a wide range of crimping dies from 4 mm2 to 1000 mm2 to suit for different size demand. The main crimping shape is hexagonal, special shape design is provided by special making. 4.

 

Gowe Hydraulic Crimping Tool BEKU type Mechanical Tool Crimping Range 10-150mm for ALCu Conductor

Gowe Hydraulic Crimping Tool BEKU type Mechanical Tool Crimping Range 10-150mm for AL/Cu Conductor

Gowe Hydraulic Crimping Tool BEKU type Mechanical Tool Crimping Range 10-150mm for AL/Cu Conductor - Accepts cembre type dies. 2kg package plastic case accessories 10,16,25,35,50,70,95,120,150mm2 hydraulic crimping tool specifications hydraulic crimping tool with plating blue-white head ,applicable to press connection of cable copper and aluminum terminal. Yoke and latcth type head for easy die changeover and easy removal of jointed conductor. 1)hydraulic crimping tool application rangesuitable for compression of electrical connectors on conductors up to 150 sqmm 2) automatic restoration when the pressure reach 700kg/cm2 3) hydraulic crimping tool with 180-degree rotatable head 4) hyraulic crimping force 6t 5) dimensions length370mm width-(handle closed) 130mm width -(handlesopen) 295mm 6) hydraulic oilk32 light weight,compact and slim design is ideal for connection in the switch box. Small handle spread. Built-in bypasss relief valve. Crimping range 10-150mm2 crimping force 60kn crimping type hexagon crimping stroke 15mm length 370mm weight 2.

 

Greenlee HKL1232 12-Ton Manual Hydraulic Crimping Tool

Greenlee HKL1232 12-Ton Manual Hydraulic Crimping Tool

Greenlee HKL1232 12-Ton Manual Hydraulic Crimping Tool - The “c” style head has a 14-inch (32 mm) opening for easy placement on connectors. Tool is supplied in a durable, molded plastic carrying case. Strong, lightweight fiberglass handles. Push button permits dies to be inserted and removed easily. Two-speed ram advances fast and shifts to lower speed to complete the crimp.

 

8 Ton Hydraulic Crimping Tool with 10mm Stroke

8 Ton Hydraulic Crimping Tool with 10mm Stroke

8 Ton Hydraulic Crimping Tool with 10mm Stroke - For aluminum and copper connectors and cables. On/off knob for easy crimping and retraction of ram. Maximum crimping force 8 tons. Crimping dies 4mm², 6mm², 8mm², 10mm², 16mm², 25mm², 35mm², 50mm², 70mm². Crimping type hexagon.

 

RIDGID RP 210-B Compact Press Tool - 31028 Hydraulic Crimping Tool with ProPress Jaws - PureFlow PEX Compatible Cordless

RIDGID RP 210-B Compact Press Tool – 31028 Hydraulic Crimping Tool with ProPress Jaws – PureFlow PEX Compatible (Cordless)

RIDGID RP 210-B Compact Press Tool – 31028 Hydraulic Crimping Tool with ProPress Jaws – PureFlow PEX Compatible (Cordless) - The 270 degrees rotating swivel barrel of the hydraulic crimping tool allows access to tight spaces. The longest service interval available for compact press tools (32,000 cycles) reduces maintenance costs. The ridgid 31028 is compatible with all compact series jaws with up to a 1-1⁄4 inch capacity for copper / stainless steel or 1-1/2 inch for pex. Cordless hydraulic crimping tool uses a powerful 18v advanced lithium 2 battery (2 batteries included) to produce 200 presses per charge for more uptime. Hydraulic crimping tool with an impressive 5,400 pounds (24kn) of hydraulic ram output.

 

Burndy PATMD6-14V Patriot In-Line Battery Actuated Hydraulic Self-Contained Crimping Tool 6 Ton Crimp Force 369 Width 2091 Length 548 Height

Burndy PATMD6-14V Patriot In-Line Battery Actuated Hydraulic Self-Contained Crimping Tool, 6 Ton Crimp Force, 3.69″ Width, 20.91″ Length, 5.48″ Height

Burndy PATMD6-14V Patriot In-Line Battery Actuated Hydraulic Self-Contained Crimping Tool, 6 Ton Crimp Force, 3.69″ Width, 20.91″ Length, 5.48″ Height - Advance, retract, and hold functions allow for one-handed operation. Battery-actuated hydraulic crimping tool for use with a range of copper and aluminum conductors and connectors. Interchangeable scissor action crimp jaws rotate 350 degrees for improved access to tight spaces. Permanent “bg” (5/8″) and “d3″ grooves and compatible with burndy “w” and “x” style dies (not included). Provides 6 tons (54 metric tons) of crimping force.

 

Haicable CYO-400 Hydraulic Crimping Tools wire clamp pipe with hexagon dies or other dies for crimper 50-400mm2

Haicable CYO-400 Hydraulic Crimping Tools wire clamp, pipe with hexagon dies or other dies for crimper 50-400mm2

Haicable CYO-400 Hydraulic Crimping Tools wire clamp, pipe with hexagon dies or other dies for crimper 50-400mm2 - Fitted with safety valve. 6. Hexagon crimping type for cable lug£¬wire clamp, pipe with hexagon dies or other dies for crimper 2. 3. Tools are set by double speed. 5. 8. 1. For flexible operation in confined place. Slow speed while dies touched lug. Output12 t capacity 50¡ª400mm2 ram stroke30 mm size 52511080mm weight 6. Head could be rotated 180 degree. Automatically relief working pressure when complete crimping. Two speed for save your labor and time. Dies could be oem 7 package is for carrying plastic case. Quick speed while dies have not connected with lug. Open head design for convenient operation. 2 kg. Standard nine set of dies, include 50 70 95 120 150 185 240 300 400 7. 4.

 

10 Ton Hydraulic Pliers Wire Battery Cable Lug Terminal Crimper Crimping Tool Kit 9 Dies

10 Ton Hydraulic Pliers Wire Battery Cable Lug Terminal Crimper Crimping Tool Kit 9 Dies

10 Ton Hydraulic Pliers Wire Battery Cable Lug Terminal Crimper Crimping Tool Kit 9 Dies - Made of superior carbon steel material as well as delicate workmanship, this pair of pliers is in good hardness and high strength, durable to use for long time. Due to its excellent ergonomic design, the handle is comfortable for easy gripping. It comes attached with 9 dies for easy operation. Material high-class carbon steel (45# + 40cr). Hex die used 4 6 8 10 16 25 35 50 70mm².

 

RIDGID RP 340-B Press Tool Kit - 43358 Hydraulic Crimping Tool With ProPress Tool Jaws - PureFlow MegaPress Standard Series Jaws and Rings Compatible Cordless

RIDGID RP 340-B Press Tool Kit – 43358 Hydraulic Crimping Tool With ProPress Tool Jaws – PureFlow, MegaPress, Standard Series Jaws and Rings Compatible (Cordless)

RIDGID RP 340-B Press Tool Kit – 43358 Hydraulic Crimping Tool With ProPress Tool Jaws – PureFlow, MegaPress, Standard Series Jaws and Rings Compatible (Cordless) - At 42,000 cycles it’s the longest service interval in the industry and 31% longer than previous models. Compatible with all ridgid standard series jaws with up to a 4 inch capacity for copper / stainless steel or 2 inch pex including ridgid propress, megapress, pureflow, xl-c, and press snap. Led-light built into the pressing tool for continued pipe joining operations of this hydraulic crimping tool in no or low-light environments. Improved ridgid pressing tool design that utilizes the standard size propress tools rings is 30% smaller to increase maneuverability and a a 17% lighter tool reducing operator fatigue. Cordless hydraulic crimping tool uses powerful an 18v advanced lithium 4ahr battery to produce 400 presses per charge for more uptime.

 

RIDGID RP 200-B Compact Press Tool Kit 43433 Hydraulic Crimping Tool with ProPress Jaws - PureFlow PEX Compatible Cordless

RIDGID RP 200-B Compact Press Tool Kit 43433 Hydraulic Crimping Tool with ProPress Jaws – PureFlow PEX Compatible (Cordless)

RIDGID RP 200-B Compact Press Tool Kit 43433 Hydraulic Crimping Tool with ProPress Jaws – PureFlow PEX Compatible (Cordless) - Cordless hydraulic crimping tool uses a powerful 18v advanced lithium 2 battery (2 batteries included) to produce 200 presses per charge for more uptime. The ridgid 43433 is compatible with all compact series jaws with up to a 1-1⁄4 inch capacity for copper / stainless steel or 1-1/2 inch for pex. Hydraulic crimping tool with an impressive 5,400 pounds (24kn) of hydraulic ram output. The longest service interval available for compact press tools (32,000 cycles) reduces maintenance costs. The inline design and 270 degrees rotating swivel barrel of the hydraulic crimping tool work together to allow access to press connections in tight and difficult to reach areas.

 

Haicable HP-240F Hydraulic Crimping Tools With Double Speed Action 16-240mm2

Haicable HP-240F Hydraulic Crimping Tools With Double Speed Action 16-240mm2

Haicable HP-240F Hydraulic Crimping Tools With Double Speed Action 16-240mm2 - Output50kn capacity 16–240mm2 ram stroke15 mm size 38015070 mm weight 3. Hexagon crimping type for cable lug£¬wire clamp, pipe with hexagon dies or other dies for crimper 4. Quick speed while dies have not connected with lug. When pressure reach to limited max pressure, safety-value will release pressure automatically, which prevent over pressure. Free for narrow space working. 7. Head could be rotated 180 degree. Slow speed while dies touched lug. Two speed for save your labor and time. 5. 0 kg. Standard eight set of dies, include 16 25 35 50 70 95 120 150 185 240 9 package is for carrying plastic case. Compact and light weight 3. 8. 2. Spring handle design for operation with one single hand. 1. 6. Fitted with safety valve. Tools are set by double speed. New design tools, with double speed action. 8.

 

Yescom 10 Ton Hydraulic Wire Battery Cable Lug Terminal Crimper Crimping Tool with 9 Dies

Yescom 10 Ton Hydraulic Wire Battery Cable Lug Terminal Crimper Crimping Tool with 9 Dies

Yescom 10 Ton Hydraulic Wire Battery Cable Lug Terminal Crimper Crimping Tool with 9 Dies - Comes with a durable plastic casespecificationmax pressure 10 tonstroke capacity 10mm9x dies 4, 6, 8, 10, 16, 25, 35, 50, 70mm2case dimension 13 3/4″l x 6 1/4″d x 3 1/4″h total weight 6 lbspackage content1x 10-ton crimper9x dies1x plastic case notice do not operate the pump after ram motion stops. The crimper tool crimps awg 12 to 2/0 size copper and aluminum wires. This 10-ton hydraulic crimper which has 9 dies with the powerful crimper, you could crimp wires and butt connectors easily. Much easier to use than a pair of hand crimpers. Featuresbrand new in boxmore convenient and secure crimping operations 10 tons maximum crimping power9 sets of the largest hexagon crimping diesdies are made of hardened steel with chrome finishcrimps strong>awg 12 to 2/0 size aluminum and copper wiretool free for changing dies quickly on/off knob for fast tool operation. Continuing to operate the pump lever after the ram stops will damage the ram. Great for battery and welding cables, power wires and electrical cables etc. 8″ long comfortable grips.

 

Panduit CD-2600-PV8 Battery Powered Hydraulic Crimping Tool Crimp Die Insert

Panduit CD-2600-PV8 Battery Powered Hydraulic Crimping Tool Crimp Die Insert

Panduit CD-2600-PV8 Battery Powered Hydraulic Crimping Tool Crimp Die Insert - Compact, portable, and lightweight (35 lbs) construction allows simple one hand crimp capability. Quick 4 second crimping cycle results in less time to crimp terminals compared to conventional methods. Used with ct-2600 to install panduit pv8 and pk8 series large wire, vinyl and kynar insulated ring terminals. Battery powered hydraulic design delivers quick termination of #8, 2 awg large wire insulated and non-insulated ring terminals. Ram retracts automatically to signal crimp is complete.

 

Z ZTDM 16T Hydraulic Pliers Battery Cable Lug Terminal Crimping Tool Kit YQK-300 with 11 Dies Black Yellow

Z ZTDM 16T Hydraulic Pliers Battery Cable Lug Terminal Crimping Tool Kit YQK-300 with 11 Dies Black & Yellow

Z ZTDM 16T Hydraulic Pliers Battery Cable Lug Terminal Crimping Tool Kit YQK-300 with 11 Dies Black & Yellow - Die size 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300mm². Made of superior carbon steel material as well as delicate workmanship, this pair of pliers is in good hardness and high strength, durable to use for long time. Due to its excellent ergonomic design, the handle is comfortable for easy gripping. Include 11 dies for free option so as to make your working smoother. Highly compatible with din, awg, jis specifications, this yqk-300 domestic use 16t hydraulic pliers with 11 dies is greatly ideal for high-altitude working tasks.

 

Burndy Y81KFT Dieless Hypress 4 Point Hydraulic Hand Operated Crimping Tool Flip Top Head 6 Ton Crimp Force 25 Width 256 Length 77 Height

Burndy Y81KFT Dieless Hypress 4 Point Hydraulic Hand Operated Crimping Tool, Flip Top Head, 6 Ton Crimp Force, 2.5″ Width, 25.6″ Length, 7.7″ Height

Burndy Y81KFT Dieless Hypress 4 Point Hydraulic Hand Operated Crimping Tool, Flip Top Head, 6 Ton Crimp Force, 2.5″ Width, 25.6″ Length, 7.7″ Height - Hand-operated hydraulic crimping tool for use with a range of copper and aluminum conductors and connectors. Dieless system eliminates the need for separate die sets. Latch style head rotates 360 degrees for improved ease of use on continuous conductor runs. Provides 6 tons (5,450 kg) of crimping force. Ul listed and csa certified crimps with made with burndy hylug and hylink compression connectors.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.