Simpson Strong Tie HSS2-2-SDS3 16-Gauge Double 2x Stud Shoe with SDS Screws 12-per box
- They are engineered and tested to perform and are manufactured to the highest quality standards. Whether working on a home project or building a structure to comply with building codes, go with the choice of engineers and contractors, go with genuine simpson strong-tie connectors. Simpson strong-tie connectors make projects easier to build while making them stronger and safer. Install with 1/4 in. Strong-drive sds screws (included). X 3 in.
Simpson Structural Screws SDS25300-R25 1/4-Inch by 3-Inch with 2-Inch threaded Structural Wood Screw, 25-Pack
- Meets icc-es esr-2236 codes. Head is stamped with simpson strong tie stamp and fastener length for easy identification. 3/8-inch hex head. Low speed 1/2-inch drill with 3/8-inch hex driver recommended for installation. Patented 4-cut point and type 17 point enables easy driving without pre-drilling and minimalm splitting.
Simpson Strong Tie CBSQ44-SDS2 12-Gauge Standoff Column Base with SDS Screws
- The standoff base reduces the potential for decay at post and column ends. Reduced reveal & high capacity. Base plate provides 1″. Provides a 1 in standoff between post and concrete that meets code requirements. Uses strong-drive screws, which allow for fast installation, reduced reveal and high capacity. Shipped with base plate assembled. Uses simpsons sods screws which allow for fast installation. Embeds in wet concrete at time of pour.
Simpson Strong Tie DTT2Z-SDS2.5 ZMAX Galvanized 14-Gauge 2x Deck Tension Tie with SDS Screws
- Installs easily with strong-drive sds screws (included). Zmax galvanization offers extra corrosion resistance for exterior and treated-wood applications. Suitable for lighter-duty hold own applications on single or double 2x posts. Made from 14 gauge steel. Install with sds 1/4 in x 2-1/2 in screws (included).
3 Pack Simpson Strong Tie CCQ44SDS2.5 4x Beam 4x Post Column Cap w/SDS Screws
- The sds screws provide for a lower profile compared to standard through bolts. This design uses sds screws to provide faster installation and provides a greater net section area of the column compared to bolts. Column caps provide a high capacity connection for column-beam combinations.
6 Pack Simpson Strong Tie SDS25412-R10 1/4″ x 4-1/2″ Hex Head Wood Screw 10 per Package
- 4cut tip reduces install torque & makes driving easier with no predrilling & minimal wood splitting. 10 per pack. 3/8″ hex washer head stamped w/no-equal sign & fastener length for easy identification after install. Double-barrier coating finish provides corrosion resistance superior to hot-dip galvanization. 1/4″ x 4-1/2″ sds screw, 2-3/4″ thread length.
Simpson Strong Tie ECCQ5-6SDS2.5 5-1/8″ Beam 6x Post End Column Cap w/SDS Screws
- . Uplift loads have been increased for wind or earthquake with no further increase allowed reduce where other loads govern. 3. 62 models assume a minimum 3 1/2″ wide post. Down loads may not be increased for short-term loading and shall not exceed the post capacity. Weld by designer. 2. Ccq4. Values in the tables reflect installation into the wide face. Steel column width shall not be less than beam width. Structural composite lumber columns have sides that show either the wide face or the edges of the lumber strands/veneers. 5 5 x 6 end column cap with screws. 6. Beam depth must be a minimum 7″. 8., General notes install simpson strong-tie sds 1/4″x 2-1/2″ wood screws, which are provided with the column cap. Spliced conditions must be detailed by the designer to transfer tension loads between spliced members by means other than the column cap. See post capacities for common post allowable loads. 4. 7. 5. See technical bulletin t-sclcolumn for values on the narrow face (edge). Column sides are assumed to lie in the same vertical plane as the beam sides. 9. This product is a eccq5-6sds2. Eccq uses 14-sds screws into the beam and 14-sds screws into the post. (Lag screws will not achieve the same load. For 5 1/4″ engineered lumber, use ccq 6x or eccq 6x models. ) Additional general notes 1. Uplift loads do not apply to splice conditions. 10. Ccoq welded to steel column will achieve same load as ccq.
Simpson Strong Tie CCQ44SDS2.5 4-Inch by 4-Inch Column Cap with SDS Screws
- Whether working on a home project or building a structure to comply with building codes, go with the choice of engineers and contractors, go with genuine simpson strong-tie connectors. They are engineered and tested to perform and are manufactured to the highest quality standards. Simpson strong-tie connectors make projects easier to build while making them stronger and safer. . Column caps provide a high capacity connection for column-beam combinations.
Simpson Strong Tie DSC5R-SDS3 Drag Strut Connector Right Hand with SDS Screws
- Whether working on a home project or building a structure to comply with building codes, go with the choice of engineers and contractors, go with genuine simpson strong-tie connectors. The dsc drag-strut connector transfers the diaphragm shear forces from the girder truss or beam to the shear walls. The new dsc5 has been designed to optimize fastener location, resulting in a connector that outperforms the dsc4 with fewer fasteners. Simpson strong-tie connectors make projects easier to build while making them stronger and safer. They are engineered and tested to perform and are manufactured to the highest quality standards.
Simpson Strong Tie ECCQ64SDS2.5 6x Beam 4x Post End Column Cap w/SDS Screws
- The sds screws provide for a lower profile compared to standard through bolts. Column caps provide a high capacity connection for column-beam combinations. This design uses sds screws to provide faster installation and provides a greater net section area of the column compared to bolts.
Simpson Strong Tie HDU5-SDS2.5 14-Gauge 13-3/16 in. Predeflected Holdown with SDS Screws
- No stud bolts to countersink at openings. Uses sds screws which install easily, reduces fastener slip, and provides a greater net section area of the post compared to bolts. Height 13-3/16 in. Pre-deflected body virtually eliminates deflection due to material stretch. Sds screws are supplied with the holdowns to ensure proper fasteners are used.
Simpson Structural Screws SDS25412-R10 1/4-Inch by 4-1/2-Inch with 2-3/4-Inch threaded Structural Wood Screw, 10-Pack
- 3/8-inch hex head. Head is stamped with simpson strong tie stamp and fastener length for easy identification. Meets icc-es esr-2236 codes. Low speed 1/2-inch drill with 3/8-inch hex driver recommended for installation. Patented 4-cut point and type 17 point enables easy driving without pre-drilling and minimalm splitting.
Simpson Strong Tie Simpson Strong Tie HDU8-SDS2.5 Predeflected Holdown with SDS Screws
- . They come with 2-1/2-inch simpson strong-tie strong-drive sds screws which install easily and provide reduced fastener slip. 5 holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. Simpson strong-tie hdu8-sds2. Using sds screws results in a greater net section, when compared to bolts, as no material is removed.
Simpson Strong Tie SDS25200-R25 1/4″ x 2″ Hex Head Wood Screw 25 per Package
- 3/8″ hex washer head stamped w/no-equal sign & fastener length for easy identification after install. 1/4″ x 2″ sds screw, 1-1/4″ thread length. Double-barrier coating finish provides corrosion resistance superior to hot-dip galvanization. 4cut tip reduces install torque & makes driving easier with no predrilling & minimal wood splitting. 25 per pack.
Simpson Structural Screws SDS25212-R25 1/4-Inch by 2-1/2-Inch with 1-1/2-Inch threaded Structural Wood Screw, 25-Pack
- Low speed 1/2-inch drill with 3/8-inch hex driver recommended for installation. 3/8-inch hex head. Patented 4-cut point and type 17 point enables easy driving without pre-drilling and minimalm splitting. Meets icc-es esr-2236 codes. Head is stamped with simpson strong tie stamp and fastener length for easy identification.
Simpson Structural Screws SDS25300MB 1/4-Inch by 3-Inch with 2-Inch threaded Structural Wood Screw, 150-Pack
- Head is stamped with simpson strong tie stamp and fastener length for easy identification. 3/8-inch hex head. Meets icc-es esr-2236 codes. Patented 4-cut point and type 17 point enables easy driving without pre-drilling and minimalm splitting. Low speed 1/2-inch drill with 3/8-inch hex driver recommended for installation.
3 Pack Simpson Strong Tie HDU5-SDS2.5 13-3/16″ Predeflected Hold Down w/SDS Screws
- Zinc galvanized finish containing 090oz of zinc per square foot of surface area (total both sides). 3″w x 13-3/16″h x 3-1/4″b. 5/8″ anchor bolt diameter. Pre-deflected body virtually eliminates deflection due to material stretch. Sds 1/4″x2 1/2″ screws are supplied with the holdowns.
Simpson Structural Screws SDS25312MB 1/4-Inch by 3-1/2-Inch with 2-1/4-Inch threaded Washer-Head Screw, 125-Pack
- Head is stamped with simpson strong tie stamp and fastener length for easy identification. 3/8-inch hex head. Low speed 1/2-inch drill with 3/8-inch hex driver recommended for installation. Meets icc-es esr-2236 codes. Patented 4-cut point and type 17 point enables easy driving without pre-drilling and minimalm splitting.
Simpson Strong Tie SDS25500-R25L SDS Structural Wood Screw 1/4-Inch by 5-Inch 25 Count
- Patented 4-cut point (coated version) and type-17 point (stainless version) enable easy driving with no pre-drilling and minimal splitting. The simpson strong tie strong-drive sds screw is a 1/4-inch diameter high-strength structural wood skew ideal for various connector installations as well as wood-to-wood applications. A low-speed 1/2-inch drill with a 3/8-inch hex driver is the recommended tool for installation. Double-barrier coating provides corrosion resistance equivalent to hot-dip galvanization.
Simpson Strong Tie DSC5L-SDS3 Drag Strut Connector Left Hand with SDS Screws
- They are engineered and tested to perform and are manufactured to the highest quality standards. The dsc drag-strut connector transfers the diaphragm shear forces from the girder truss or beam to the shear walls. Simpson strong-tie connectors make projects easier to build while making them stronger and safer. Whether working on a home project or building a structure to comply with building codes, go with the choice of engineers and contractors, go with genuine simpson strong-tie connectors. The new dsc5 has been designed to optimize fastener location, resulting in a connector that outperforms the dsc4 with fewer fasteners.
Simpson Strong Tie HUCQ410-SDS 4×10 Heavy Duty Joist Hanger Concealed/Reverse Flange w/SDS Screws
- This patented innovation distributes the load through two points on each joist nail for greater strength. Most models have triangle and round holes. To achieve maximum loads, fill both round and triangle holes with common nails. Hucq, features concealed flanges so it can be installed close to the end of the supporting beam. All hangers in this series have double-shear nailing. (Do not bend or remove tabs). It also allows the use of fewer nails, faster installation, and the use of common nails for all connections. They install with sds screws (supplied with the hanger) for high capacity and ease of installation.
Simpson Strong Tie SDWH19600DB-RC12 0.195″ x 6″ Stong-Drive Structural Wood Screws with Large Hex-Washer Head – 12 per Package
- Bold thread design provides superior holding power and cinches fastened members together for consistent installation. Large head provides maximum bearing area. Large hex-washer head provides excellent bearing area for a secure connection. Installs best with a low-speed 1/2″ drill motor with a 5/16″ hex driver (bit included in each package). Patented 4cut point ensures fast starts, reduced installation torque and eliminates the need for pre-drilling in most applications. Under-head nibs offer greater installer control when seating the head. Double-barrier coating provides corrosion resistance equivalent to hot-dip galvanization, making it suitable for many exterior and preservative-treated wood applications. Knurled shank section above the threads makes driving easier. Hex drive reduces cam-outs for easier driving. Strong-drive® sdwh structural wood screws, large hex-washer head, for structural wood-to-wood connections, designed to provide an easy-to-install, high-strength alternative to through-bolting and traditional lag screws.
Simpson Strong Tie HSS2-SDS1.5 Stud Shoe with Screws
- The hss2-sds1. It has easy-to-use flanges that can be bent up to 90 degrees during installation and then bent back for fastening. 5 stud shoe is designed to reinforce 2 x studs notched in construction. Provides tension load capacity as well as increased compression loads.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
