Top 22 Cross Peins

 

BGS 3852 Cross Pein Sledge Hammer with Fibreglass Handle, 300g by BGS - Unbreakable technology provided by the steel core handle, which eliminates breaking during overstrikes. Bgs 3852 cross pein sledge hammer with fibreglass handle, 300g. Safety plate locks head firmly to handle to eliminate dislodging. Hi-vis drop forged head adds instant identification under any job site conditions. Ergonomic handle shaped and thickened for increased comfort, less vibration and improved grip.

 

Pieh Blacksmith Tools Peddinghaus Cross Pein Hammer – 28-oz. German Cross Pein - Peddinghaus hammers are drop forged in germany and/or france. Handles are hickory. 800 gram.

 

Cross Pein Hammer2 lb. Head Weight, 1-1/2″ Head Width, 13-1/2″ Overall Length - , Handle material steel, handle design nonslip grip, standard tool (accessory needed for tethering), face diameter 1-1/2 in. , Overall length 13-1/2 in. ‘ Cross pein hammer, head material forged steel, head weight 2 lb. , Head color blue, handle color blue, features shock absorbing plug reduces vibration, standards amse ‘. , Head width 1-1/2 in. , head length 5 in.

 

Jackson 3-Pound Cross Pein Hammer – 1196700 - The 3-pound forged steel head with chamfered edges provides added durability. The cross pein hammer is perfect for shaping block, brick and stone. The 16-inch lacquered hickory handle offers added strength to the tool while striking. .

 

Groz 34530 Indestructible Handle Cross Pein Hammer with 2-Pound Head and 16-Inch Handle - Ergonomic rubber grip handle absorbs vibration and reduces user fatigue. Conventional wooden handles and fiberglass handles fall apart not just when over-striked but in a few hundred strikes, even when used with full care. Indestructible handle made with four spring steel bars which run the full length of the handle. 52, 56 hrc head is especially useful in demolition work where the struck surface is softer than the hammer head. Steel bars lock with a steel plate on top of the hammer head ensuring the head never gets dislodged.

 

Seymour HB-3 3-Pound Cross Pein Blacksmith Hammer Wood Handle - Also use to shape block, brick, and stone. Cross pein hammer. 16-inch hickory handle. 3-pound head. Used to strike, shape, and bend unhardened metal.

 

Cross Pein Hammer Metalsmith Blacksmith Metal Hand Tool - New 6oz cross pein hammer this is a new 6 ounce cross pein hammer great for metal working has a face that measures approximately 3/4″ (19 mm) in diameter the length of the head measures approximately 3 1/2″ (88 mm) the hammer measures approximately 10 1/4″ (260 mm) long.

 

Wright Tool 9078 3-Pound Cross Pein Hammer with Wood Handle - . This tool is a striking tool and can be used on a variety of surfaces. Wright tool 9078 3 pound cross peen sledge hammer has a wooden handle and is 15 inch long.

 

Wilton WIL30316 3lb Bash Cross Pein Hammer with 16 in. Unbreakable Handle - Unbreakable technology provided by the steel core handle, which eliminates breaking during overstrikes. Safety plate locks head firmly to handle to eliminate dislodging. Head weight 2 lbs. Hi-vis drop forged head adds instant identification under any job site conditions. Ergonomic handle shaped and thickened for increased comfort, less vibration and improved grip.

 

Nupla 23135 Blacksmiths Cross Pein Sledge Hammer with Handle and NuPro Molded Fiberglass Grip, 14″ Handle Length, 3lbs Weight - The hammer has a 14″ heavy-duty molded fiberglass handle for durability, and a molded grip for ease of handling. Hardened steel head is strong and durable. Nupla tools manufactures industrial-grade hand tools for industrial and home use. . The nupla 23135 blacksmith’s cross-pein sledge hammer (also called cross-peen or machinist’s hammer) has a 3-lb. This cross-pein sledge hammer is for use in forging or riveting metalwork. Hardened steel head, a 14″ molded fiberglass handle, and a molded grip. The 3-lb. The company, founded in 1938, is headquartered in sun valley, ca.

 

Wilton 30216 BASH Cross Pein Hammer 2lb Head, 16-Inches - S. H unbreakable handle  sledge hammer is the toughest sledge ever built. The toughest jobs need the toughest tools. The wilton b. A. A. S. A. S. With molten steel bars reinforcing the handle, and a locking steel plate holding the head to that handle, the b. H will hold up when you need it most. H puts traditional wood and fiberglass hammers to shame. Tested to 25,000 overstrikes, the b.

 

STANLEY 54-077 PIN HAMMER, CROSS PEIN, 3 1/2OZ - And one straight chisel point striking. And tempered s-2 tool steel one square. Price for eachorder unit each 1 handle type hickory svhc to be advised weight 100. Hammer with hardwood handle drop forged. Face polished finish hardwood handle.

 

3LB Cross Pein Hammer - Head weight 3 lb handle material fiberglass double injected fiberglass handle drop forged and deep tempered heat treated machine faced, polished surface head black, stove pipe finish is heat treated and rust resistant replacement handle sequatchie link #423-70. For replacement handle use sequatchie link #423-70. Machine faced, polished surface head. Drop forged and deep tempered heat treating pulls the hardness into the interior of the tool. . Collins cross pein hammer features double injected fiberglass handle. Black, stove pipe finish is heat treated and rust resistant.

 

Performance Tool M7040B 3-Pound Cross Pein and 3-Pound Sledge Combination - Heavy duty fiberglass handles. 3-pound sledge and 3-pound cross pein hammer. Mirror polish heads with large striking surfaces. Drop forged high carbon steel construction. Ribbed cushion handles for comfort and grip strength.

 

Cross Pein Hammer, 3 lb., 15 In, Hickory - Head width 1-1/2″ overall length 15″ country of origin (subject to change) united states. Price for each handle material hickory wood standards amse head material forged steel features flame treated handles are “sure-lock” wedged in tapered eye item cross pein hammer tether capable standard tool (accessory needed for tethering) handle design straight head color blue handle color natural head weight 3 lb head length 5-1/2″ face diameter 1-1/2″.

 

Nupla BC-2 Blacksmiths Cross Pein Sledge Hammer with Classic Handle and C Grip, 14″ Handle Length, 2lbs Weight - Non slip grip for use in slippery conditions. Hammer with classic handle which is drop forged, heat treated and with a tempered head. Excellent solid fiberglass handle made from a pultrusion process making it strong and resistant.

 

Bon RiverWorks 27-159 12-Pound Forged Carbon Steel Cross Pein Sledge Hammer - 2 eye. Forged high carbon steel hand drilling hammer with a no. Several size options.

 

Body Fender Repair Cross Pein Bumping Hammer With Hardwood Handle - Body fender repair cross pein bumping hammer with hardwood handle drop forged and tempered s-2 tool steel one square and one straight chisel point striking face polished finish hardwood handle.

 

Nupla BC-4SG Classic Cross Pein Hammer, SG Grip, 14″ Long Handle - Nupla classic handles provide safety and durability for the toughest industrial/contractor jobs. Available in rubber or integrated molded styles. Reduces fatigue caused by strenuous oversqueezing of the handle. Nupla classic handles feature proprietary super duty nuplaglas for exceptional strength. Safest grip in the industry can be used with gloves without slipping only nupla has the super grip.

 

Cross Pein Hammer1-1/2 lb. Head Weight, 1-1/4″ Head Width, 13″ Overall Length - , Overall length 13″, handle material steel, handle design nonslip grip, tether capable standard tool(accessory needed for tethering), face diameter 1-1/4″, head width 1-1/4″, head length 4-3/4″, head color blue, handle color blue, features shock absorbing plug reduces vibration, standards amse. Cross pein hammer, head material forged steel, head weight 1-1/2 lb.

 

Sealey Cross Pein Pin Hammer 4Oz - 16-inch fiberglass handle. Always wear eye protection. 5-inch head. 2-1/2-pound size. Sealey cph04 4 oz cross pein pin hammer.

 

Cross Pein Hammers – 2# cross pein hammer 16″hickory handle - -Eye size 3/4 x 1 in. -Brand name jackson®. Generic dimensions -handle length 16 in. 027-1196000 features -the striking face is designed for general blacksmith work in striking unhardened metal. Dimensions overall product weight -5 pounds. -The peins are used for shaping and bending unhardened metal.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.