Top 15 Best Steel Chisels

 

Tru-Cut CASFDX Asphalt Cutter 1-18 Hex Shank with Notch Hammer Steel Chisel

Tru-Cut CASFDX Asphalt Cutter 1-1/8 Hex Shank with Notch Hammer Steel Chisel

Tru-Cut CASFDX Asphalt Cutter 1-1/8 Hex Shank with Notch Hammer Steel Chisel - Masonry forged hammer tool. Surface is stress resistant. Forged from the highest quality chrome-vanadium steel. Heat treated in a high tech fluidized bed hardening and carbonizing furnaces. Used for cutting asphalt or hard ground.

 

Morakniv Craftline Carpentry Chisel with Carbon Steel Blade 30

Morakniv Craftline Carpentry Chisel with Carbon Steel Blade, 3.0″

Morakniv Craftline Carpentry Chisel with Carbon Steel Blade, 3.0″ - Blade thickness 012 in (031 cm), blade length 30 in (75 cm), total length 775 in (197 cm), net weight 49 oz (139 g). Hard plastic combi-sheath allows for the connection of a second knife and sheath. Ergonomic handle of tpe rubber provides optimum grip. Single-side honed, carbon steel chisel-edge blade for carpentry and wood work. Limited lifetime manufacturer’s warranty.

 

Dasco 75 in L High Carbon Steel Chisel 3-Mfg 334-0 - Sold As 4 Units

Dasco 7.5 in. L High Carbon Steel Chisel 3-Mfg# 334-0 – Sold As 4 Units

Dasco 7.5 in. L High Carbon Steel Chisel 3-Mfg# 334-0 – Sold As 4 Units - Suitable for beginners,woodcuts enthusiast, and students. This manganese steel chisel is double-edged, weighty,and the head is finer than ordinary carving. Set of 10 stone carving tool with silk wrapped around the outside, not astringent does not slip, is an indispensable tool. Total length 145mm , size infr please check the photo demo. It is the most commonly used knife tool of high school students for engraving and woodcuts.

 

6 ½ STEEL CHISEL   Pack of 2 Pcs

6 ½” STEEL CHISEL : ( Pack of 2 Pcs. )

6 ½” STEEL CHISEL : ( Pack of 2 Pcs. ) - Available in blister pack. Tough and durable, made of solid steel, this 6 1/2″ chisel will fit easily into most tool boxes, and can easliy be the hardest working tool in the box. Used by locksmiths, also in mechanical processing, repair, etc. You will find many uses for this chisel. Great for locksmiths handy in mould manufacturing sturdy and durable for years of dependable use professional quality black friday specials -cyber monday & holiday deal.

 

EDCO C10316 ALR Chisel Scaler 2-Inch Milled Steel Chisel 45 Degrees

EDCO C10316 ALR Chisel Scaler 2-Inch Milled Steel Chisel, 45 Degrees

EDCO C10316 ALR Chisel Scaler 2-Inch Milled Steel Chisel, 45 Degrees - These air-powered units eliminate hammers, hand-chisels and many hours of labor. The lr-2-45m 2″ milled steel chisel is an accessory for edco alr series air powered chisel scalers. Edco air-powered chisel scalers use a rapid, hammering action to quickly chisel away the material you’re removing. This single bevel chisel enables contractors to easily remove tile, grout, ice, fiberglass, concrete, asphalt, roofing shingles or hardened deposits. Milled steel is malleable and stronger than stainless steel.

 

Matsumura 1 Blue Steel Bench Chisel

Matsumura 1″ Blue Steel Bench Chisel

Matsumura 1″ Blue Steel Bench Chisel - After curing in charcoal for several days, each chisel is individually tempered to rockwell c65. Blue steel is a more complex steel than white steel with added elements to increase hardness and durability, particularly important in hard and abrasive woods such as teak and exotic hardwoods. Instructions for care and sharpening are included. A hand turned best quality japanese red oak handle with hand forged iron hoops is added to the blade. He continues to live and work at the family home located in the small mountain village of yoiita, where with the occasional assistance of his wife, each chisel is hammer forged by hand from a combination of special hitachi blue steel and wrought iron. For over 200 years the matsumura family has had a reputation for supplying only the best quality chisels. Over 40 separate processes are required to complete each chisel. The current matsumura began over 60 years ago to follow in the footsteps of his father and grandfather. Overall length is 9 and blade length is 2-1/4. Twice rated the top chisels by “fine woodworking” magazine, these matsumura blue steel chisels are well balanced and a pleasure to use.

 

Tru-Cut CBSCARBTE SDSMax 34 Hex Shank Hammer Steel Chisel

Tru-Cut CBSCARBTE SDSMax 3/4 Hex Shank Hammer Steel Chisel

Tru-Cut CBSCARBTE SDSMax 3/4 Hex Shank Hammer Steel Chisel - 25 carbide tips. 3/4 hex shank. Bushing tool. Hammer steel chisel. Fits sdsmax shank tools.

 

SpringTools AMA996 4 Piece Metalworking Set with High Speed Steel Center Punch Self Centering Center Punch 516-Inch Cold Chisel Combination Prick Punch Center Punch

SpringTools AMA996 4 Piece Metalworking Set with High Speed Steel Center Punch, Self Centering Center Punch, 5/16-Inch Cold Chisel, Combination Prick Punch & Center Punch.

SpringTools AMA996 4 Piece Metalworking Set with High Speed Steel Center Punch, Self Centering Center Punch, 5/16-Inch Cold Chisel, Combination Prick Punch & Center Punch. - The self centering center punch tool is ideal for mounting brackets, hinges and other hardware to metal surfaces. Center punch is ideal for marking wood or steel for drilling guaranteed to never have your drill wander off spot mark again. 5/16″ cold chisel is designed to remove metal burrs, rivets, screw & nail heads, peening welds and other metal protrusions also great for notching sheet metal and other light materials outstanding tool for working in hard to reach areas. High speed steel center punch hardened to rc65 for precision marking on hardened steel surfaces high temper steel tip can be resharpened without loss of hardness this tool is ideal for removing rivit bodies. All springtools impact tools are made in the usa and are guaranteed for life.

 

Superior Steel SC774C Round Shank Collar Hand Air Tool Chisel 4 Pieces Set

Superior Steel SC774C Round Shank Collar Hand Air Tool Chisel 4 Pieces Set

Superior Steel SC774C Round Shank Collar Hand Air Tool Chisel 4 Pieces Set - Steel type 42 cr mo | hardness 50±3 | heat treated yes. Shank length1-3/4 inch | shank size round | blade length 14 inch, 15 inch, 2 inch, 1 inch. Blade width 05 inch, 075 inch, 075 inch, 14 inch | shank diameter 3/8 inch. Includes punch, double edge chisel, flat head chisel and scraper. Shank length 1-3/4 inch | shank width 3/4 inch | overall length 7 inch, 6 inch, 65 inch, 5 inch.

 

EDCO C10302 ALR Chisel Scaler 4-Inch Steel Chisel Size 4-Inch Model C10302EDC

EDCO C10302 ALR Chisel Scaler 4-Inch Steel Chisel Size: 4-Inch Model: C10302EDC

EDCO C10302 ALR Chisel Scaler 4-Inch Steel Chisel Size: 4-Inch Model: C10302EDC - Edco air-powered chisel scalers use a rapid, hammering action to quickly chisel away the material you’re removing. . This single bevel chisel enables contractors to easily remove tile, grout, ice, fiberglass, concrete, asphalt, roofing shingles or hardened deposits. These air-powered units eliminate hammers, hand-chisels and many hours of labor. The lr-4 4 steel chisel is an accessory for the edco alr series air powered chisel scalers.

 

6  STEEL CHISEL   Pack of 2 Pcs  TZ-57700-Z02-D01

6 “” STEEL CHISEL : ( Pack of 2 Pcs. ) (TZ-57700-Z02-D01)

6 “” STEEL CHISEL : ( Pack of 2 Pcs. ) (TZ-57700-Z02-D01) - You will find many uses for this chisel. Great for locksmiths handy in mould manufacturing sturdy and durable for years of dependable use professional quality. Available in blister pack. Used by locksmiths, also in mechanical processing, repair, etc. Tough and durable, made of solid steel, this 6 1/2″” chisel will fit easily into most tool boxes, and can easliy be the hardest working tool in the box.

 

EDCO C10302 ALR Chisel Scaler 4-Inch Steel Chisel

EDCO C10302 ALR Chisel Scaler 4-Inch Steel Chisel

EDCO C10302 ALR Chisel Scaler 4-Inch Steel Chisel - Edco air-powered chisel scalers use a rapid, hammering action to quickly chisel away the material you’re removing. The lr-4 4″ steel chisel is an accessory for the edco alr series air powered chisel scalers. . These air-powered units eliminate hammers, hand-chisels and many hours of labor. This single bevel chisel enables contractors to easily remove tile, grout, ice, fiberglass, concrete, asphalt, roofing shingles or hardened deposits.

 

Tru-Cut CS18TE Scaling 16-Inch SDSMax Hammer Steel Chisel

Tru-Cut CS18TE Scaling 16-Inch SDSMax Hammer Steel Chisel

Tru-Cut CS18TE Scaling 16-Inch SDSMax Hammer Steel Chisel - Masonry forged hammer tool. Surface is stress resistant. Used for removing scale, rust and weld splatter. Heat treated in a high tech fluidized bed hardening and carbonizing furnaces. Forged from the highest quality chrome-vanadium steel.

 

Matsumura Japanese Blue Steel Bench Chisel - 21mm - 78

Matsumura Japanese Blue Steel Bench Chisel – 21mm – 7/8″

Matsumura Japanese Blue Steel Bench Chisel – 21mm – 7/8″ - Matsumura bench chisel, 21mm, 7/8″. Cutting edge of aogami hagane (blue steel) hardened to rockwell c64. Ranked “best overall” in the japanese style chisel category in fine woodworking 200 chisel review. Handle of akagashi (japanese red oak) double hooped with hammered steel ring at top. Overall length 9″, blade length is 2″.

 

Steelex D2228 Lathe Chisel Set 8-Piece

Steelex D2228 Lathe Chisel Set, 8-Piece

Steelex D2228 Lathe Chisel Set, 8-Piece - Set includes 1-inch skew, 1-1/2-inch skew, 1/2-inch spear point, 1/8-inch parting tool, 1/2-inch round nose, 1/4-inch gouge, 1/2-inch gouge and 3/4-inch gouge. Designed to avoid damage to brick work or decorative stone. Does not bind in mortar. Flat face with blunt tip.