Best 21 Concrete Screws

 

The Hillman Group 8969 Concrete Screw, 1/4 X 2-1/4-Inch - Use tapper screws to attach electrical equipment, two by fours, downspout straps, hose reels, flag poles, hurricane shutters, and more. Tapper screws are designed for fastening applications in concrete, block, and brick. Tapper screws are perfect for indoor and outdoor use. State of the art thread design cuts into concrete. .

 

IRWIN 1881131 Impact Performance Series Concrete Screw Drill-Drive Installation Set with Pro Set Case for 3/16-Inch and 1/4-Inch Screws, 9-Piece - One-piece construction withstands higher torque loads than standard quick-change bits. Manufactured with heavy-duty, cold-forged, high-grade steel to withstand high torque output. Built for maximum durability and long life with impact drivers. Black oxide finish resists corrosion and increases life of bit. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life.

 

The Hillman Group 41556 Hex Washer Head Tapper Concrete Screw Anchor, 3/16-Inch x 2-3/4-Inch, 20-Pack - For light to medium duty applications. Tapper screws are perfect for indoor and outdoor use. State of the art thread design cuts into concrete. . Tapper screws are designed for fastening applications in concrete, block and brick. Use tapper screws to attach electrical equipment, two by fours, downspout straps, hose reels, flag poles, hurricane shutters and more.

 

(66200)3/16 x 1-3/4″ PFH 100pk Concrete Screws - Patented phillips ii with acr drive drive system. Complete system. Corrosion resistance, can be used in pt wood. Acr3 bit and 5/32 drill bit included. Heads will not strip out-allows for more torque.

 

Chenango Supply 1/4 x 2-1/4″ Flat Head Concrete Screw Anchor. 100 pieces With Drill Bit (1/4 x 2-1/4) - Concrete screws or “tapcons” are great for screwing into concrete. Used to anchor signs, fixtures to concrete and block buildings. Included masonry drill bit is 3/16″ size.

 

Bosch TC800 Concrete Screw Drill Bit Sleeve - Magnetic nut setters hold the screw in place, and keep the sleeve from being damaged, extending the life of the entire system. Bosch not only has a rich heritage in concrete, but is the largest manufacturer of concrete drill bits in the world. Bosch holds the tightest dimension to ensure low run out. Complete program including all sizes, the bit holder, the bit sleeve, and a complete anchoring system.

 

Kwiktap (47100)1/4 X 1- 1/4″ Hex 100 Pk Concrete Screws [misc.] - Patented phillips ii drive system with acr. Corrosion resistance, can be used in pt wood. Code approved. Acr3 driver bit and 3/16″ drill bit included. Heads will not strip out-allows for more torque.

 

Simpson TTN25500PF Titen Concrete Screws Phillips Flat Head 1/4″ x 5″ (100) - Corrosion resistance, can be used in pt wood. Patented phillips ii drive system with acr. Acr3 driver bit and 3/16″ drill bit included. Code approved. Heads will not strip out-allows for more torque.

 

(47200) 1/4 x 1-3/4″ Hex 100 pk Concrete Screws - Acr3 driver bit and 3/16″ drill bit included. Heads will not strip out-allows for more torque. Code approved. Patented phillips ii drive system with acr. Corrosion resistance, can be used in pt wood.

 

Chenango Supply 3/16 x 1-3/4″ Hex Head Concrete Screw Anchor. 100 pieces With Drill Bit (3/16 x 1-3/4) - These are commonly known as tapcons. 5/32 concrete screw drill bit included in box. Hex head uses 1/4 nut driver. 1000 hour salt spray test coating. Cuts its own threads in concrete.

 

IRWIN Tools 1870568 Impact Performance Series Concrete Screw Installation 3/16-Inch X 5-Inch Drill Bit for 1/4-Inch Screws - Built for maximum durability and long life with impact drivers. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One-piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit.

 

Chenango Supply 1/4 x 2-3/4″ Hex Head Concrete Screw Anchor. 100 pieces With Drill Bit (1/4 x 2-3/4″) - Cuts its own threads in concrete. 1000 hour salt spray test coating. These are commonly known as tapcons. 3/16 concrete screw drill bit included in box. Hex head uses 5/16 nut driver.

 

Chenango Supply 1/4 x 1-1/4″ Flat Head Concrete Screw Anchor. 100 pieces With Drill Bit (1/4 x 1-1/4) - Concrete screws or “tapcons” are great for screwing into concrete. . Used to anchor signs, fixtures to concrete and block buildings. Included masonry drill bit is 3/16″ size.

 

Wej-It Stalgard Coated Carbon Steel Flat Head Concrete Screw, USA Made, #2 Phillips Drive, 3/16″ Diameter, 2-1/4″ Length, Pack of (100) - The anchor is made of 1022 carbon steel for strength and has a corrosion-resistant blue r-blocker coating that meets american society for testing and materials (astm) b117 standards to resist 1,000 hours of salt spray. Specificationsfits hole sizeultimate tensile strength in 1,924-psi hollow block @ 1-1/4″ embedment depth and 1″ edge distanceultimate shear strength in 1,924-psi hollow block @ 1-1/4″ embedment depth and 1″ edge distanceultimate tensile strength in 2,730-psi concrete @ 1″ embedment depth and 1″ edge distanceultimate shear strength in 2,730-psi concrete @ 1″ embedment depth and 1″ edge distanceultimate tensile strength in 2,730-psi concrete @ 1-3/4″ embedment depth and 1″ edge distanceultimate shear strength in 2,730-psi concrete @ 1-3/4″ embedment depth and 1″ edge distance3/16″425 lb. Wej-it fastening systems manufactures mechanical and adhesive fasteners for use in concrete and drywall. These screws have hardened threads that cut into the sides of a drilled hole to secure their placement in the material. 1,860 lb. 1,100 lb. Concrete screws are threaded fasteners that install into hard, brittle materials such as concrete, brick, and block to securely fasten a fixture. The wej-it wej-con concrete screw cuts threads into concrete, hollow block, brick, mortar, and concrete masonry units (cmus) to provide a secure hold without requiring threaded inserts. 670 lb. The twin-lead threads and the fully threaded point cut into the mounting material to secure the screw placement and resist pull-out. The screw includes a drill bit to create the correct size hole for installation. The screw can be removed and reinstalled into the same hole to enable fixture changes or screw replacement. 860 lb. 920 lb. 425 lb. What’s in the box100 wej-it fcs3621 concrete screws1 drill bit. 1/4″1,000 lb. 550 lb. The phillips drive has an x-shaped slot that accepts a phillips driver and is designed to allow the driver to slip out of the head to help prevent over-tightening and damage to the thread or fastener. 635 lb. 695 lb. Warning use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). 900 lb. The company, founded more than 60 years ago, is headquartered in norwalk, ct. For more information, see the manufacturer’s literature. The flat head is cone shaped for use in countersunk holes and has a flat top that fits flush with the mated surface.

 

The Hillman Group 375297 Hex Washer, Head Slotted Tapper Concrete Screw Anchor, 1/4 x 3-1/4-Inch, 100-Pack - State of the art thread design cuts into concrete. Use tapper screws to attach electrical equipment, two by fours, downspout straps, hose reels, flag poles, hurricane shutters and more. Tapper screws are designed for fastening applications in concrete, block and brick. . Tapper screws are perfect for indoor and outdoor use. For light to medium duty applications.

 

Chenango Supply 1/4 x 1-3/4″ Flat Head Concrete Screw Anchor. 100 pieces With Drill Bit (1/4 x 1-3/4) - Concrete screws or “tapcons” are great for screwing into concrete. Used to anchor signs, fixtures to concrete and block buildings. Included masonry drill bit is 3/16″ size. .

 

Chenango Supply 3/16 x 2-1/4″ Phillips Flat Head Concrete Screw Anchor. 100 pieces With Drill Bit (3/16 x 2-1/4) - Included masonry drill bit is 5/32″ size. Used to anchor signs, fixtures to concrete and block buildings. Concrete screws or “tapcons” are great for screwing into concrete. .

 

(67100) 3/16 x 1-1/4″ Hex 100pk Concrete Screws - Acr2 bit and 5/32″ drill bit included. Patented phillips ii with acr drive drive system. Complete system. Corrosion resistance, pt lumber can be used. Heads will not strip out-allows for more torque.

 

Wej-It Stalgard Coated Carbon Steel Flat Head Concrete Screw, USA Made, #3 Phillips Drive, 1/4″ Diameter, 1-1/4″ Length, Pack of (100) - The flat head is cone shaped for use in countersunk holes and has a flat top that fits flush with the mated surface. 900 lb. 670 lb. 860 lb. The anchor is made of 1022 carbon steel for strength and has a corrosion-resistant blue r-blocker coating that meets american society for testing and materials (astm) b117 standards to resist 1,000 hours of salt spray. 635 lb. The screw can be removed and reinstalled into the same hole to enable fixture changes or screw replacement. 1/4″1,000 lb. 695 lb. What’s in the box100 wej-it fcs1411 concrete screws1 drill bit. 425 lb. For more information, see the manufacturer’s literature. 1,860 lb. 1,100 lb. The twin-lead threads and the fully threaded point cut into the mounting material to secure the screw placement and resist pull-out. The screw includes a drill bit to create the correct size hole for installation. Specificationsfits hole sizeultimate tensile strength in 1,924-psi hollow block @ 1-1/4″ embedment depth and 1″ edge distanceultimate shear strength in 1,924-psi hollow block @ 1-1/4″ embedment depth and 1″ edge distanceultimate tensile strength in 2,730-psi concrete @ 1″ embedment depth and 1″ edge distanceultimate shear strength in 2,730-psi concrete @ 1″ embedment depth and 1″ edge distanceultimate tensile strength in 2,730-psi concrete @ 1-3/4″ embedment depth and 1″ edge distanceultimate shear strength in 2,730-psi concrete @ 1-3/4″ embedment depth and 1″ edge distance3/16″425 lb. The phillips drive has an x-shaped slot that accepts a phillips driver and is designed to allow the driver to slip out of the head to help prevent over-tightening and damage to the thread or fastener. These screws have hardened threads that cut into the sides of a drilled hole to secure their placement in the material. 920 lb. The company, founded more than 60 years ago, is headquartered in norwalk, ct. Wej-it fastening systems manufactures mechanical and adhesive fasteners for use in concrete and drywall. Concrete screws are threaded fasteners that install into hard, brittle materials such as concrete, brick, and block to securely fasten a fixture. The wej-it wej-con concrete screw cuts threads into concrete, hollow block, brick, mortar, and concrete masonry units (cmus) to provide a secure hold without requiring threaded inserts. Warning use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). 550 lb.

 

Chenango Supply 3/16 x 1-1/4″ Phillips Flat Head Concrete Screw Anchor. 100 pieces With Drill Bit (3/16 x 1-1/4) - Used to anchor signs, fixtures to concrete and block buildings. Concrete screws or “tapcons” are great for screwing into concrete. Included masonry drill bit is 5/32″ size.

 

The Hillman Group 41555 Hex Washer Head Tapper Concrete Screw Anchor 3/16 X 2 1/4 20-Pack - Tapper screws are designed for fastening applications in concrete, block and brick. State of the art thread design cuts into concrete. Tapper screws are perfect for indoor and outdoor use. For light to medium duty applications. Use tapper screws to attach electrical equipment, two by fours, downspout straps, hose reels, flag poles, hurricane shutters and more.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.