Best 21 Bushing Tools

 

Champion Chisel, 1 by 4-1/4-Inch Hex Shank Steel Bushing Tool, 16 Steel Teeth – Designed for 30-40lb Class Pavement Breakers - Bushing tools level out concrete by removing bumps and tacking down the surface. Champion chisel, 1 by 4-1/4-inch hex shank steel bushing tool, 16 steel teeth, designed for 30-40lb class pavement breakers. This measurement should be 4-1/4″. Also known as jack hammers, these tools are used for moderate to heavy concrete demolition. If you are not sure if you have a hammer that takes 1″ tools, measure from the collar back to the end of the shank. All tool measurements are “under the collar”. Bushing tools are a great tool for leveling out concrete surfaces.

 

Milwaukee 48-62-4063 SDS-Max Carbide Bushing tool - The product is highly durable. Made in germany. Sds-max carbide bushing tool. The product is easy to use and easy to handle.

 

Relton BS-8S Forged Hammer Bushing Tools with Spline Shank Bushing Head - Roughing concrete surface prior to applying a surface finish concrete surface removal to produce a rough exterior finish 1 pc bushing head shank minimum order 1 each.

 

Relton BT-16MX Forged Hammer Bushing Tools with SDS-Max Shank - Roughing concrete surface prior to applying a surface finish concrete surface removal to produce a rough exterior finish 1 piece bushing tool minimum order 1 each.

 

Milwaukee 9-3/4 Bushing Tool ¾ Hex 48-62-3085 - Milwaukee 9-3/4  bushing tool ¾ hex 48-62-3085   ·         the product is easy to use ·         the product is durable ·         the product is manufactured in united states ·         bushing tool ·         3/4 inch hex shank ·         1-3/4 inch square ·         made from forged high grade steel.

 

Proline CM96-19 16-Inch SDS Max Bushing Tool Shank - Laser marked shanks ensure positive identification. Used for roughing up concrete or concrete surface removal in electric power tools. These tools are used in a broad range of applications including road construction, pavement work, bridge construction, utility instalation, demolition and a variety of maintenance functions. Proline sds max bushing tool shanks are used with bushing tool heads. Engineered for high performance masonry removal. Oil quenched and shot blasted for additional stress relief. Sds max bushing tool shanks are anti-rust lacquered in a natural finish.

 

Proline CM96-20 Bushing Tool Head 16-teeth - These tools are used in a broad range of applications including road construction, pavement work, bridge construction, utility instalation, demolition and a variety of maintenance functions. Engineered for high performance masonry removal. Sds max bushing tool heads are anti-rust lacquered in a natural finish. Proline sds max replacement bushing tool head with 16-teeth are used for roughing up concrete or concrete surface removal in electric power tools. Oil quenched and shot blasted for additional stress relief. Laser marked shanks ensure positive identification.

 

Champion Chisel, Spline or Rotary Shank Carbide Tipped Bushing Tool with 25 teeth - . This chisel is interchangeable with bosch, makita, milwaukee, and dewalt as well as any other spline power tools on the market. Bushing tools are a great tool for leveling out concrete surfaces. Champion chisel works ++++ fits only demolition hammers that accept the spline shank style. Laser etched part numbers for easy identification and a clean finish make this tool look as good as the job it does. Bushing tools level out concrete by removing bumps and tacking down the surface. ++++ Champion chisel’s square head spline shank carbide bushing tool has 25 pointed carbide teeth. The carbide teeth will last up to 3 times longer than their steel counterparts.

 

Milwaukee 48-62-2070 Bushing Tool - 1-1/2 inch square and 12-1/2 inch overall length. Made from forged high grade steel. 3/4 inch hex with 21/32 inch round shank. The product is easy to use. The product is durable. The product is manufactured in united states. Bushing tool.

 

Makita 798144-5 Bushing Tool - Makita 7981445 specificationsdimensions 1-3/4″x 10″makita 7981445 featuresideal for removing excess concrete and roughening surfacesfor use with makita hr3851.

 

Bosch HS1809B10 Round Hex 1-Piece Bushing Tool, 10-Pack - Heat treated. Hrc50 grade of steel. Evenly tempered.

 

Champion Chisel, 1-1/8 by 6-Inch Hex Shank Steel Bushing Tool, 16 Steel Teeth – Designed for 60lb & 90lb Pneumatic Hammers - 1-1/8″ x 6″ pavement breaker chisels are for 60-90 lb class pavement breakers. Bushing tools are a great tool for leveling out concrete surfaces. Also known as jack hammers, these tools are used for moderate to heavy concrete demolition. Bushing tools level out concrete by removing bumps and tacking down the surface. Champion chisel, 1-1/8 by 6-inch hex shank steel bushing tool, 16 steel teeth, designed for 60-90lb class pavement breakers. All tool measurements are “under the collar”.

 

Mercedes Benz Lower Control Arm Bushing Tool W202 W170 -  Control arm with the arm in place on the car. 2 packaged in molded storage / carrying case. 3 used for remove and install the front & rear rubber mount bushing from the lower track. 1 application mercedes model w202 w170.

 

Hitachi 724960 SDS Max 1-3/4-Inch x 9-1/2-Inch Bushing Tool - Hitachi 724960 sds-max 1-3/4-inch square by 9-1/4-inch demolition bushing tool hammer chisel.

 

DeWalt DWA5856 10″ Carbide Bushing Tool with SDS Max Shank - A wear-resistant tip delivers extreme durability. With a high-impact, dual-steel design, dewalt high impact steel sds max chisels & demolition steel deliver optimum performance for chipping and light demolition applications. A rugged, shock-resistant shaft helps to prevent breakage.

 

Milwaukee 48-62-3185 Bushing Tool, 15-Pack - 3/4 inch hex shank. 1-3/4 inch square and 9-3/4 inch overall length. Features bushing tool. Drop forged two piece assembly with heat treated teeth used to prepare the concrete surface for re-surfacing. Made from forged high grade steel. 15 per package. When the teeth on the bushing head are worn, purchase head only and re-use the shank portion.

 

Relton BH-16 Forged Hammer Bushing Tools with 16 Pt. Bushing Head - Concrete surface removal to produce a rough exterior finish. Roughing concrete surface prior to applying a surface finish. Over all length 12″.

 

Champion Chisel, Carbide Tipped Bushing Tool with 25 teeth, 3/4-Inch Hex Demo Shank Style. - Champion chisel works ++++ fits only demolition hammers that accept the 3/4-inch hex demo shank style. This chisel is interchangeable with bosch, makita, milwaukee, and dewalt as well as any other 3/4-inch hex demo power tools on the market. Laser etched part numbers for easy identification and a clean finish make this tool look as good as the job it does. The carbide teeth will last up to 3 times longer than their steel counterparts. ++++ Champion chisel’s square head 3/4-inch hex demo shank carbide bushing tool has 25 pointed carbide teeth. Bushing tools are a great tool for leveling out concrete surfaces. Bushing tools level out concrete by removing bumps and tacking down the surface.

 

Cane Creek Double Barrel Bushing Hardware Assembly Tool - 1 application mercedes model w202 w170. Allows safe installation and removal of cane creek double barrel bushings. 2 packaged in molded storage / carrying case. Control arm with the arm in place on the car.

 

DEWALT DW5783 9-1/2-Inch by1-3/4-Inch Bushing Tool Round Spline Shank - Measures 9-1/2 inches long and 1-3/4 inches wide at the tip. Compatible with any rotary hammer that accept a 3/4-inch hex by 21/32-inch round shank. For light chipping and chiseling of tile, mortar, glazing compounds, and other masonry products. Includes one bushing tool. Fully hardened steel body increases durability and prevents breakage.

 

Champion Chisel, Steel Bushing Tool with 16 teeth, .680 Round Shank Oval Collar, Designed for .680 Round Chipping Hammer with Oval Retainer - Champion chisel works ++++ fits only demolition chipping hammers that accept the. Bushing tools level out concrete by removing bumps and tacking down the surface. Bushing tools are a great tool for leveling out concrete surfaces. This bushing tool is made from a hardened and tempered alloy steel for toughness and durability. Made with an oval collar that requires the hammer to have an oval collar retainer. 680″ round shank bits. ++++ champion chisel’s square head. 580″ hex shank style. This bushing tool is made to fit chipping hammers that accept. 680″ round shank oval collar bushing tool has 16 pointed steel teeth.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.