24 Best and Coolest Striking Wrenches for 2019

 

Urrea 2646SWM 46mm 121-Point Offset Striking Wrench, Steel - When the wrench is hit a vibration is produced throughout it and loosens the residue keeping the bolt jammed. . Its structure and composition allows it to be hit strongly in order to loosen nuts. It can be used in places where there is a partial obstruction.

 

Stanley Proto Tether-Ready J2633SW-TT 12 Point Heavy-Duty Offset Striking Wrench 2-1/16-inch - Â  The skydock incorporates a short lanyard that is light, tight and less likely to get caught on other equipment.   Since a better tether system is a safer tether system, skyhook provides secure tool transfers, a free range of motion, and positive tool control at the worksite.   the stanley proto skyhook and skydock system works with a complete line of sockets, drive tools, wrenches, striking tools, pliers and accessories.   By simpy “swiping to switch” tools can be transferred securely and safely.   The skyhook system builds on existing carabiner technology to provide secure transfers at every point along with a skydock that attaches to the wrist. Introducing the new skyhook tether and transfer system from stanley proto which is the next generation of safety technology for positive control hand tools at any height, work areas requiring material exclusion (fme) or anywhere simple accidents become costly mistakes.   You can attach the skydock to a hand, wrist, belt, tool apron, co-worker, work truck or a central station.

 

Gearench Petol Striking Wrenches – 7/8” stud striking wrench 1-7/16” nut - Quantity -single. 306-sw03 features -the large smooth striking surface reduces the hazard of glancing blows and lessens the chance of a rope slipping from the handle when maintaining tension on the wrench. Product type -wrenches. Number of points -6. Of points 6. -Opening type box. Measurement type -sae. Dimensions overall product weight -3 pounds. -Handle type i-beam. Use -striking wrench. Size -7/16″/7/8″. -No.

 

Ampco Safety Tools WSO-36 Open Striking Wrench, Non-Sparking, Non-Magnetic, Corrosion Resistant, 36 mm - Non-magnetic for use near highly sensitive magnetic equipment mri and clean room environments corrosion resistant even in the most severe environments. Non-sparking for use where flammable or combustible vapors, liquids, dust or residue are present. Non-sparking, non-magnetic and corrosion resistant factory mutual approved, made in the usa, beryllium free.

 

Stanley Proto J2616SW Heavy Duty 12 Point Offset Striking Wrench 1 Inch - Black oxide finish. Offset handle clears obstructions. For use where extreme force is necessary to loosen or set large fasteners. Heavy box walls provide greater torque transmission. Large striking surface for surer blow contact and more efficient transmittal of force to fastener.

 

Stanley Proto J2626SW Heavy Duty 12 Point Offset Striking Wrench 1-5/8 Inch - Heavy box walls provide greater torque transmission. For use where extreme force is necessary to loosen or set large fasteners. Large striking surface for surer blow contact and more efficient transmittal of force to fastener. Black oxide finish. Offset handle clears obstructions.

 

Urrea 2741SWM 41mm 121-Point Straight Striking Wrench - . These box1end wrenches feature a strike zone. Its phosphatized black finish protects it against corrosion. . In comparison to regular box1end, obstruction, or combination wrenches, this wrench is designed to be stricken.

 

Stanley Proto J2756SW Heavy Duty 6 Point Straight Striking Wrench 3-1/2 Inch - Heavy box walls provide greater torque transmission. Straight handle design helps prevent the wrench from cocking when struck. Large striking surface for surer blow contact and more efficient transmittal of force to fastener. For use where extreme force is necessary to loosen or set large fasteners. Black oxide finish.

 

Stanley Proto J2636SW Heavy Duty 12 Point Offset Striking Wrench 2-1/4 Inch - For use where extreme force is necessary to loosen or set large fasteners. Large striking surface for surer blow contact and more efficient transmittal of force to fastener. Offset handle clears obstructions. Black oxide finish. Heavy box walls provide greater torque transmission.

 

Stanley Proto J2650SWM Heavy Duty 12 Point Offset Striking Wrench 50MM - Black oxide finish. Heavy box walls provide greater torque transmission. Offset handle clears obstructions. Large striking surface for surer blow contact and more efficient transmittal of force to fastener. For use where extreme force is necessary to loosen or set large fasteners.

 

Stanley Proto J2632SW Heavy Duty 12 Point Offset Striking Wrench 2 Inch - Large striking surface for surer blow contact and more efficient transmittal of force to fastener. For use where extreme force is necessary to loosen or set large fasteners. Offset handle clears obstructions. Black oxide finish. Heavy box walls provide greater torque transmission.

 

Stanley Proto J2638SW Heavy Duty 12 Point Offset Striking Wrench 2-3/8 Inch - For use where extreme force is necessary to loosen or set large fasteners. Black oxide finish. Large striking surface for surer blow contact and more efficient transmittal of force to fastener. Heavy box walls provide greater torque transmission. Offset handle clears obstructions.

 

Stanley Proto J2723SW Heavy Duty 6 Point Straight Striking Wrench 1-7/16 Inch - Black oxide finish. For use where extreme force is necessary to loosen or set large fasteners. Large striking surface for surer blow contact and more efficient transmittal of force to fastener. Straight handle design helps prevent the wrench from cocking when struck. Heavy box walls provide greater torque transmission.

 

Stanley Proto J2622SW Heavy Duty 12 Point Offset Striking Wrench 1-3/8 35MM - Black oxide finish. For use where extreme force is necessary to loosen or set large fasteners. Heavy box walls provide greater torque transmission. Large striking surface for surer blow contact and more efficient transmittal of force to fastener. Offset handle clears obstructions.

 

Stanley Proto J2620SW Heavy Duty 12 Point Offset Striking Wrench 1-1/4 Inch - Offset handle clears obstructions. Large striking surface for surer blow contact and more efficient transmittal of force to fastener. Black oxide finish. For use where extreme force is necessary to loosen or set large fasteners. Heavy box walls provide greater torque transmission.

 

Stanley Proto J2635SW Heavy Duty 12 Point Offset Striking Wrench 2-3/16 Inch - Large striking surface for surer blow contact and more efficient transmittal of force to fastener. Heavy box walls provide greater torque transmission. Black oxide finish. For use where extreme force is necessary to loosen or set large fasteners. Offset handle clears obstructions.

 

Ampco Safety Tools WSO-22 Open Striking Wrench, Non-Sparking, Non-Magnetic, Corrosion Resistant, 22 mm - Non-sparking for use where flammable or combustible vapors, liquids, dust or residue are present. Non-sparking, non-magnetic and corrosion resistant factory mutual approved, made in the usa, beryllium free. Non-magnetic for use near highly sensitive magnetic equipment mri and clean room environments corrosion resistant even in the most severe environments.

 

Urrea 2716SW 1-Inch 12-Point Straight Striking Wrench, Steel - . In comparison to regular box1end, obstruction, or combination wrenches, this wrench is designed to be stricken. These box1end wrenches feature a strike zone. Its phosphatized black finish protects it against corrosion. .

 

Stanley Proto J2647SW Heavy Duty 12 Point Offset Striking Wrench 2-15/16 Inch - Heavy box walls provide greater torque transmission. Offset handle clears obstructions. Black oxide finish. Large striking surface for surer blow contact and more efficient transmittal of force to fastener. For use where extreme force is necessary to loosen or set large fasteners.

 

Ampco Safety Tools WSO-1-1/16 Open Striking Wrench, Non-Sparking, Non-Magnetic, Corrosion Resistant, 1-1/16″ - Non-sparking for use where flammable or combustible vapors, liquids, dust or residue are present. Non-sparking, non-magnetic and corrosion resistant factory mutual approved, made in the usa, beryllium free. Non-magnetic for use near highly sensitive magnetic equipment mri and clean room environments corrosion resistant even in the most severe environments.

 

Stanley Proto J2624SW Heavy Duty 12 Point Offset Striking Wrench 1-1/2 Inch - Offset handle clears obstructions. For use where extreme force is necessary to loosen or set large fasteners. Black oxide finish. Large striking surface for surer blow contact and more efficient transmittal of force to fastener. Heavy box walls provide greater torque transmission.

 

Stanley Proto J2630SW Heavy Duty 12 Point Offset Striking Wrench 1-7/8 Inch - Offset handle clears obstructions. Large striking surface for surer blow contact and more efficient transmittal of force to fastener. For use where extreme force is necessary to loosen or set large fasteners. Black oxide finish. Heavy box walls provide greater torque transmission.

 

Urrea 2746SWM 46mm 121-Point Straight Striking Wrench - In comparison to regular box1end, obstruction, or combination wrenches, this wrench is designed to be stricken. Its phosphatized black finish protects it against corrosion. . These box1end wrenches feature a strike zone.

 

Urrea 2736SWM 36mm 121-Point Straight Striking Wrench - These box1end wrenches feature a strike zone. . . In comparison to regular box1end, obstruction, or combination wrenches, this wrench is designed to be stricken. Its phosphatized black finish protects it against corrosion.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.