Zinc Plated Steel Self-Drilling Screw, Pan Head, Phillips Drive, #2 Drill Point, #4-24 Thread Size, 1 inches Length (Pack of 100)
- Zinc plated steel fasteners are suitable where strength and corrosion resistance are primary considerations. Create their own threads when driven into material. Phillips drive is designed to cam out under too much torque. Pan head allows for higher tightening torques.
Steel Self-Drilling Screw, Black Oxide Finish, Pan Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 5/8″ Length (Pack of 100)
- Black oxide finish offers mild corrosion resistance and lubricity. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Pan head has a flat top and short vertical sides with a rounded top edge. Steel is often used in applications where strength is the primary consideration.
TTC PRODUCTION 60 Piece Screw Machine Stub Length Twist Drill Sets – Drill Point Angle: 135° Split Point Tool Material: H.S.S
- For optimal performance and the best tool life, suitable lubricating/cutting oils or the appropriate coolant fluids are recommended. Best suited for drilling steel, cast steel, cast iron, or other alloyed or non-alloyed ferrous materials, they also work well for a variety of non-ferrous and non-metallic materials. .
Steel Self-Drilling Screw, Zinc Plated Finish, Modified Truss Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 2″ Length (Pack of 50)
- Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Zinc plating resists corrosion and has a reflective appearance. Steel is often used in applications where strength is the primary consideration. Modified truss head is extra wide with a low-profile dome and integral round washer.
Zinc Plated Steel Self-Drilling Screw, Undercut 82 degrees Flat Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 3/4 inches Length (Pack of 100)
- Phillips drive is designed to cam out under too much torque. Zinc plated steel fasteners are suitable where strength and corrosion resistance are primary considerations. Create their own threads when driven into material. Flat head style allows fastener to sit flush to the surface.
Steel Self-Drilling Screw, Black Zinc Plated Finish, Hex Washer Head, Hex Drive, #3 Drill Point, #10-16 Thread Size, 1″ Length (Pack of 100)
- Hex drive tightens from the side with a wrench, enabling use when there is no space above for a driver. Steel is often used in applications where strength is the primary consideration. Zinc plating resists corrosion and has a black reflective appearance. Hex washer head has a flange for additional grip with the mating surface.
18-8 Stainless Steel Self-Drilling Screw, Plain Finish, 82 Degree Flat Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 1″ Length (Pack of 25)
- 18-8 stainless steel provides good corrosion resistance and strength. Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Plain surface has no finish or coating.
Steel Self-Drilling Screw, Zinc Plated Finish, 82 Degree Flat Head, Star Drive, #2 Drill Point, #6-20 Thread Size, 1/2″ Length (Pack of 100)
- Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive. Steel is often used in applications where strength is the primary consideration. Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface. Zinc plating resists corrosion and has a reflective appearance.
410 Stainless Steel Self-Drilling Screw, Plain Finish, Pan Head, Square Drive, #2 Drill Point, #8-18 Thread Size, 1″ Length (Pack of 25)
- 410 stainless steel has high strength and hardness ratings and resists corrosion in mild environments. Square drive resists slippage better than a phillips or slotted drive. Pan head has a flat top and short vertical sides with a rounded top edge. Plain surface has no finish or coating.
Stainless #10 x 1″ Hex Washer Head Self Drilling Sheet Metal Tek Screws With Drill Point, (1/2″ To 2″ Lengths in Listing) 100 pieces (#10 x 1 inch)
- These stainless teks are great to use in environments that are damp. Self-drilling screws, also known as tek screws, eliminate the need for a pre-drilled hole. The length of the drill point determines the material thickness which the screw can reliably penetrate. When selecting a self-drilling screw design, it is important to consider the material thickness and type of materials to be joined. .
Steel Self-Drilling Screw, Zinc Plated Finish, Undercut 82 Degree Flat Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 1-1/2″ Length (Pack of 50)
- Steel is often used in applications where strength is the primary consideration. Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. Zinc plating resists corrosion and has a reflective appearance. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.
Micro 100 SPD-250-100 100° Included Drill Point Spotting and Centering Drill, 1/4″ Drill Diameter, 3/4″ Flute Length, 2-1/2″ Overall Length, Solid Carbide Tool
- The typical diameter of a spot drilled hole is 50-75% of the secondary final drill diameter. Micro 100, spd-250-100, spotting and centering, solid carbide drill. Optimized rake and clearance angles that produce, high speed and high material removal rates while providing improved surface finishes in most routing applications. Their substrate is in a class of its own, resulting from an exclusive treating process that allows for increased speeds and feeds and extended tool life. Micro 100 solid carbide tools feature more than just a micro-grain of excellent quality. Designed and engineered for when tight tolerance hole locations are required. For over 45 years, micro 100 is a known industry leader and internationally acclaimed. Available with four different drill points. Selection of the correct drill point(s) is in relationship to the material(s) being drilled. Each size may be used on a wide range of hole diameters. Spotting drills improve the accuracy of the secondary drilled hole. Spot drilling is required to prevent the drill from walking. Best suited for most materials with the correct selection of the drill point. This tool may also be used for chamfering or deburring.
Stainless #12 x 3/4″ Hex Washer Head Self Drilling Sheet Metal Tek Screws With Drill Point (1/2″ to 2-1/2″ lengths in Listing), 100 pieces (#12 X 3/4 INCH)
- The length of the drill point determines the material thickness which the screw can reliably penetrate. Self-drilling screws, also known as tek screws, eliminate the need for a pre-drilled hole. . When selecting a self-drilling screw design, it is important to consider the material thickness and type of materials to be joined. These stainless teks are great to use in environments that are damp.
Steel Self-Drilling Screw, Zinc Plated Finish, Modified Truss Head, Phillips Drive, #2 Drill Point, #6-20 Thread Size, 3/4″ Length (Pack of 100)
- Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Zinc plating resists corrosion and has a reflective appearance. Steel is often used in applications where strength is the primary consideration. Modified truss head is extra wide with a low-profile dome and integral round washer.
Steel Self-Drilling Screw, Zinc Plated Finish, Wafer Head, Star Drive, #3 Drill Point, #10-16 Thread Size, 1-1/2″ Length (Pack of 50)
- Wafer head has a flat top, a 70-degree cone-shaped bearing surface, and a small slope between the top and the bearing surface. Zinc plating resists corrosion and has a reflective appearance. Steel is often used in applications where strength is the primary consideration. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive.
Steel Self-Drilling Screw, Zinc Plated Finish, Modified Truss Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 3/4″ Length (Pack of 100)
- Steel is often used in applications where strength is the primary consideration. Zinc plating resists corrosion and has a reflective appearance. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Modified truss head is extra wide with a low-profile dome and integral round washer.
Steel Self-Drilling Screw, Zinc Plated Finish, Sealing Hex Washer Head With EPDM Washer, Hex Drive, #3 Drill Point, #10-16 Thread Size, 2-1/2″ Length (Pack of 50)
- Steel is often used in applications where strength is the primary consideration. Hex drive tightens from the side with a wrench, enabling use when there is no space above for a driver. Zinc plating resists corrosion and has a reflective appearance. Sealing hex washer head has a flange with an epdm rubber washer bonded to the underside to resist leakage, loosening, and damage to the mating surface.
Stainless #14 x 1-1/2″ Hex Washer Head Self Drilling Sheet Metal Tek Screws With Drill Point, (3/4″ To 2-1/2″ Lengths in Listing) 50 pieces (#14 x 1-1/2 inch)
- Self-drilling screws, also known as tek screws, eliminate the need for a pre-drilled hole. The length of the drill point determines the material thickness which the screw can reliably penetrate. When selecting a self-drilling screw design, it is important to consider the material thickness and type of materials to be joined. These stainless teks are great to use in environments that are damp.
NEF Self Drilling Screw Assortment, Hex Washer Head Drill Point Screws, 500 Piece Kit
- Northeast fasteners 500 piece hex washer head self drilling screw assortment 12 different sizes #8, 10, 12 and 14. Includes 12 hole plastic organizer which closes securely with two snaps. Lengths 1/2, 3/4, 1 and 1 1/2. The organizer prevents mixing of the compartments once the box is closed. These are self drilling screws and do not need a pilot hole. Zinc plated steel.
410 Stainless Steel Self-Drilling Screw, Plain Finish, Modified Truss Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 1/2″ Length (Pack of 50)
- 410 stainless steel has high strength and hardness ratings and resists corrosion in mild environments. Plain surface has no finish or coating. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Modified truss head is extra wide with a low-profile dome and integral round washer.
Steel Self-Drilling Screw, Zinc Plated Finish, Undercut 82 Degree Flat Head, Phillips Drive, #3 Drill Point, #12-14 Thread Size, 1-1/2″ Length (Pack of 25)
- Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Steel is often used in applications where strength is the primary consideration. Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. Zinc plating resists corrosion and has a reflective appearance.
410 Stainless Steel Self-Drilling Screw, Plain Finish, Modified Truss Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 1-1/2″ Length (Pack of 25)
- Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Modified truss head is extra wide with a low-profile dome and integral round washer. 410 stainless steel has high strength and hardness ratings and resists corrosion in mild environments. Plain surface has no finish or coating.
Mitutoyo 950-275 Drill Point Gage, 6″, 59 Degree
- Slide graduated oem 32nds. Rule and slide made of steel with satin chrome finish. For measuring properly grounded 59 degree drill tips.
Stainless #6 x 1/2 Inch Hex Washer Head Self Drilling Sheet Metal Tek Screws With Drill Point, 410 Stainless Steel, Self Driller, 100 pieces (#6 x 1/2 Inch)
- These stainless teks are great to use in environments that are damp. The length of the drill point determines the material thickness which the screw can reliably penetrate. Self-drilling screws, also known as tek screws, eliminate the need for a pre-drilled hole. When selecting a self-drilling screw design, it is important to consider the material thickness and type of materials to be joined.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
