Techniks 19/11-4054 12 7/32″ ANSI Rigid Tap Collet Size 1
- Our part # tec-19/11-4054. Change worn taps in seconds. For ansi tap sizes #12, 7/32″. For use with size 1 holders. Quick-change style.
QA-1 Quick Change Tap Adapter/Collet Size 1 (Tap size 3/8″ LS)
- When paired with quick change holders, these greatly reduce change-over time. The qa-1 is a rigid (no clutch) quick change positive drive tap adaptor that is ideal for mass production tapping applications. Equivalent to collis # 78917 us shop tools # bz10-037p command # xtc1-0375 techniks # 19/11-4095.
5-C Expanding Collets Size: 3 / .750 – 1.437″ Range (1-1/2″ Dia. / 1″ Lgth. / .750″ Min. Mach Dia.)
- Allows “internal chucking” within the range. Once seated in spindle and machined to size, these collets can hold concentricity well within. Machinable to any configuration within their stock and minimum machinable diameters. 750″ through 1. The most effective and accurate means of internal chucking for short runs to mass production. Shanks are precision ground to maintain concentricity with +/-. 437″. 0005″. Heads are machinable. Applicable on any manual or cnc lathe, milling machine or grinder with a 5c spindle. 0005″.
TTC Hex for 5C Collets – Size: Hex
- Quick acting collet closer (#cb5l) is interchangeable on either collet block. Capacity 1/16″ thru 1-1/8″. Made of high quality tool steel, hardened. For simplified set-ups on drill presses, milling machines, lathes and surface grinders. Precision ground, parallel and square to within 0005″.
T&O ER-16 Collet Chuck – Taper: 1/2″ Straight Shank Shank Length : 4″ COLLET SIZE: ER-16
- Made of highest grade steel available. Clamping nut diameter 7/8″.
TTC Production R8 Round Collet – SIZE: 1″
- Thread 7/16″-30. Runout 0005″. Hardened and ground.
1/4-inch Front Exhaust Air Angle Die Grinder with 11.5mm collet wrench, 17.5mm collet wrench (Collet size: 1/4″, 1/8″)
- Average air consumption 4 cfm. Required pressure 90 psi. Includes 115mm collet wrench, 175mm collet wrench collet size 1/4″, 1/8″. Compact, rugged motor with efficient front exhaust air flow system. Great for tight or angled grinding jobs that an in-line die grinder won’t reach.
QA-1 Quick Change Tap Adapter/Collet Size 1 (Tap size 5/16″)
- When paired with quick change holders, these greatly reduce change-over time. The qa-1 is a rigid (no clutch) quick change positive drive tap adaptor that is ideal for mass production tapping applications. Equivalent to collis # 78916 us shop tools # bz00-31p command # xtc1-0312 techniks # 19/11-4079.
TTC 5C Hex Collet – Size: 1/8″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH
- Precision ground to close tolerance. Made of highest grade steel available.
Warrior Free Shipping 10pcs Tig Collet 10N24 size 3/32″ 2.4mm*50mm Copper material
- 4mm50mm material copper package including 10pcs 2. 4mm 10n24. Details suitable for wp-17/18/26 tig welding torch tig parts 10n24, size 3/32″ 2.
T&O ER-40 Spring Collet Chuck Holder – Taper: 1-1/4″Straight Shank COLLET SIZE: ER-40
- Concentricity guaranteed to 0005″. Wide variety of holders to be used on various machine tools. Unique 8° taper affords highest gripping power. Wide holding range of 0394″ on each collet. A must when you need to hold tools accurately and rigidly.
Techniks 19/11-4036 0-6″ ANSI Rigid Tap Collet Size 1
- For use with size 1 holders. Our part # tec-19/11-4036. Quick-change style. Change worn taps in seconds. For ansi tap sizes 0-#6 & m16-m35 metric shanks.
T&O ER-16 Collet Chuck – Taper: R8 COLLET SIZE: ER-16
- R8 shank x 1-1/2″. Made of highest grade steel available.
TTC 5C Hex Collet – Size: 5/8″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH
- Made of highest grade steel available. Precision ground to close tolerance.
T&O ER-40 Spring Collet Chuck Holder – Taper: 1″ Straight Shank COLLET SIZE: ER-40
- Tap shank square (inch) 0286. Tap shank dia (inch) 0381. Wide variety of holders to be used on various machine tools. Tap size 3/8″.
TTC 5C Hex Collet – Size: 7/8″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH
- Made of highest grade steel available. Precision ground to close tolerance.
ETM ER-40 Spring Collet Chuck Holder – Taper: 4 MT COLLET SIZE: ER-40
- Description, etm er-40 spring collet chuck holder, taper 4 mt collet size er-40 collet size, er40 taper, 4 mt drawbar thread, 5/8-11 length from gage line to face of clamping nut, 3-3/16.
G. CAPORALI SRL 5C Square Collet – Size: 9/16″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH
- Made of highest grade steel available. Precision ground to close tolerance.
TTC 5C Hex Collet – Size: 11/16″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH
- Made of highest grade steel available. Precision ground to close tolerance.
T&O ER-40 Spring Collet Chuck Set – Taper: 40 N.S. COLLET SIZE: ER-40
- Tools never get stuck in holder due to “built-in self-releasing system”. Concentricity guaranteed to 0005″. A must when you need to hold tools accurately and rigidly. Unique 8° taper affords highest gripping power. Wide holding range of 0394″ on each collet.
TTC 5C Hex Collet – Size: 1/2″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH
- Precision ground to close tolerance. Made of highest grade steel available.
T&O ER-40 Spring Collet Chuck Set – Taper: 50 N.S. COLLET SIZE: ER-40
- Wide holding range of 0394″ on each collet. A must when you need to hold tools accurately and rigidly. Unique 8° taper affords highest gripping power. Tools never get stuck in holder due to “built-in self-releasing system”. Concentricity guaranteed to 0005″.
TTC 5C Hex Collet – Size: 9/16″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH
- Precision ground to close tolerance. Made of highest grade steel available.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
