22 Top Roofing Nailers

 

Ramsond CRN-45 7/8-Inch to 1-3/4-Inch Nails Coil Air Roofing Nailer - Operates with a 60 to 110 psi standard air compressor equipped with a standard male 1/4-inch 18 npt air inlet. Fastener type 11-gauge nail (3/4 inch to 1-3/4 inches) nail capacity 120. Composite gaskets, seals and rings with ergo-grip cushioned comfort. Minimum operating pressure 60 psi maximum operating pressure 110 psi. Trigger-actuated mechanism automatically positions and drives nails.

 

Craftsman 18180 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer with Case - 360, degree muliti-directional exhaust port. On board storage for the 4mm allen wrench. Comes with carrying case, 4mm alllen wrench, air tool oil and manual. Magnesium housing for light-weight performance and extreme durability. Rubber molded grip for comfort and less fatigue.

 

BOSTITCH RN46-RK RN46 Roofing Nailer Rebuid Kit - Simple instructions show how o-rings, seals and bumpers can be replaced making a tool in otherwise good condition “like new”. Rebuild kit for rn46 model. Includes installation instructions, o-ring chart, head valve components, o-rings, driver guide, feed piston stop, and lube all air tool repair kits enable the users to recondition these tools at minimum cost and with little “down-time”. Special lubricant is provided with every o-ring kit. “Stanley” pneumatic tool rebuild kit original stanley bostitch parts kit.

 

Surebonder 9780 Pneumatic Coiled Roofing Nailer with Carrying Case - ) 1/4, min. Hose size (in. ) 12. ) 6. Air consumption (cfm) 2. 50, fastener sizes (in. ) 3/4-1 3/4, fasteners used roofing nails, tool weight (lbs. The model 9780 has lightweight, rugged cast aluminum construction, see-through nail magazine, contact mechanism that prevents accidental firing, built-in shingle guide, adjustable air exhaust, plus a high-impact carry case. The surebonder coiled pneumatic roof nailer is the perfect air-powered tool for use when reroofing, box assembly, siding and more. 05. 45, case included yes, coil or strip coil, fastener capacity per strip 120, adjustable depth control no, inlet size (in. ) 1/4, operating psi 80-100, tool length (in.

 

B&C Eagle CN45R 15 Degree 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer - Lightweight magnesium housing. Adjustable exhaust deflector (tool free 360 degree). Adjustable shingle guide. Weight 48lbs. Tool free adjustable depth of drive.

 

Bostitch RN46-1 ROOFING NAILER by BOSTITCH - Technical specification item air roofing nailer style straight collation angle 15 degrees.

 

Freeman PCN45 Coil Roofing Nailer - Quick action bump firing, safety lock and reversible belt hook. Ideal for asphalt roofing, flooring underlayment, cedar shingles, roof and wall sheathing, siding installation, wood box assembly and fencing. Tool-less depth adjustment. Included carrying case. Uses 15 degree 11-gauge coil nails ringing from ¾” to 1-3/4″.

 

DEWALT D51321 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer - Convenient side-load canister design allows for quick and easy nail loading carbide inserts in contact trip foot protect against premature wear. Lightweight (49 lb) tool with a magnesium housing provides enhanced maneuverability and aids in minimizing user fatigue. Produces a cycle rate that works as fast as you do. Tool-free depth adjustment assists in locating the perfect depth setting for precise nail penetration. Delivers the power to consistently drive nails in the toughest applications.

 

MILWAUKEE Coil Roofing Nailer - Tool-free depth adjustment provides precise depth control to reduce overdriving nails. Self-cleaning air filter keeps tool clear of jobsite contamination. Adjustable air deflector directs exhaust away from work area. Magnesium housing reduces weight and user fatigue. Selectable trigger for easy selection between bump and sequential fire.

 

Hitachi NV45AB2S 7/8-Inch to 1-3/4-Inch Coil Roofing Nailer (Discontinued by Manufacturer) - Comes with a 5-year limited warranty. Powerful, lightweight, and well balanced nailer for roofing applications. Lightweight and well-balanced. Adjustable depth of drive bottom load magazine. Includes safety glasses, (2) hex bar wrenches (3 and 4 mm). Powerful, lightweight and well-balanced nailer for roofing applications. Weighs 57 pounds 5-year warranty.

 

PORTER-CABLE RN175A 7/8-Inch to 1-3/4-Inch Coil Roofing Nailer - Drives 15 degree wire collated roofing nails from 7/8-inch to 1-3/4-inch. Consistent power on every shot with internal piston catch mechanism. Selectable trigger, sequential or contact actuation mode sets nails properly every time with a tool-free depth-of-drive with detents. Two feed pawls provide a reliable nail feed mechanism. Compact body design for better balance and style.

 

Grip-Rite Roofing Mini Palm Air Nailer - Aluminum main housing and cap is more durable than magnesium for punishing roofing environments. Comfort and convenience features include durable molded comfort grip, 360 tool free adjustable exhaust, and adjustable shingle guide. Tool free adjustable depth of drive for consistent and controllable nail set. Adjustable nail canister accommodates entire range of true round head roofing nails. Steel wear plate reduces shingle abrasion on tool.

 

Makita AN451 7/8-Inch to 1-3/4-Inch Coil Roofing Nailer - Shingle gauge can be easily adjusted with a single lever lock. Built-in air filter prevents dust or foreign matter from entering the tool. 9 quick dial adjustments for precise control of nail depth. Uses standard wire collated coil of 120 nails. Ideal for nailing asphalt and fiberglass shingles.

 

Max CN445R3 Superroofer Roofing Coil Nailer, - This nailer had a dial adjustable depth control as well as a maintenance free end cap filter. The max cn445r3 super roofer has a unique tangle free swivel joint.

 

DEWALT Coil Roofing Nailer by DEWALT - High speed valve technology drives over 10 nails per secondergonomic design is lighter than leading competitive coil roofing nailershigh life engine, seals and feed system for durability and long lifesteel skid plates with rubber inserts protect the tool and help to stop it from slidingdepth adjust wheel with numbered detents helps drive nails to the proper depth into a variety of materials.

 

Paslode R175-C Roofing Coil Nailer 501245 - Accepts all standard roofing coil nails smooth and ring shank (7/8″, 1 3/4″). Shingle guide allows for accurate nail placement. Universal 15 degree. Heavy duty wear plates protects toll housing. Single door magazine provides fast and easy loading.

 

Ridgid ZRR175RNE 1-3/4 in. 15 Degree Roofing Nailer (Certified Refurbished) - Hex grip micro texture for secure grip and maximum user comfort. This certified refurbished product is tested & certified by ridgid to look and work like-new the product includes all original accessories, and is backed by a 1 year warranty. Dry-fire lockout extends motor life and prevents misfires. Straight drive is to enhance drive quality and roof quality. Magnetic nail holder that allows for easy loading and stops last nail dropout.

 

Ridgid R175RNA Coil Roofing Nailer Overhaul Maintenance Kit # 079006001110 - Nose magnet holds last nail. Dial adjustable depth control. Tangle free swivel plug. Overhaul kit.

 

Makita AN453 1-3/4-Inch Roofing Coil Nailer - For nailing of asphalt and fiberglass shingles. Easy loading adjustable canister system allows for faster, more precise loading. At1150a. “”Tool-less”” depth adjustment engineered for more precise control and flush nailing. Hex wrench (783202-0). Uses standard wire collated coil of 120 nails. Oil supply (181434-7). Built-in magnet ensures last nail is driven to prevent lost or misfired nails. Safety goggles (191687-a). Af505. “”Tool-less”” shingle guide designed for easy adjustments and consistent shingle placement. Double head valve allows nailer to recycle quickly. An911h. Shingle gauge can be easily adjusted with a single lever lock. Nose assembly can be easily removed for cleaning or maintenance. Quick dial adjustment of 9 settings for precise control of nail depth. Rubberized handle for better fit and added comfort. Oversized steel wear plates reduce abrasion on tool. Adjustable tool hook allows tool to remain close by but never in the way. Aluminum housing for longer tool life. An610h. An611. An902. An923. Af633. At638. Large carbide inserts on nose piece for long lasting performance. Only 52 lbs for less weight and more power. At2550a.

 

Bosch RN175-RT 15 Degree 1-3/4 in. Coil Roofing Nailer (Certified Refurbished) - Adjustable shingle guide for consistent shingle spacing. Includes factory warranty. Adjustable exhaust directs the air away from the user. Depth adjust wheel helps drive nails to the proper depth. Selectable trigger allows the tool to be switched between contact and sequential firing modes.

 

RIDGID 1-3/4 in. Roofing Coil Nailer - Magazine angle 15 degrees | fastener length 3/4 inch to 1-3/4 inch. Fastener diameter 0120 inch. Operating pressure 80-110 psi | fastener coil, wire collation. Air inlet 1/4 inch. Full strike drive system provides maximum air power in a compact size fasten edge technology provides an industry-leading feature set dry-fire lockout feature extends motor life and prevents misfires straight drive feature to enhance drive quality and roof quality magnetic nail holder allows for easy loading and stops last nail dropout.

 

BOSTITCH BRN175 15 Degree Coil Roofing Nailer - Depth adjust wheel helps drive nails to the proper depth. Adjustable shingle guide for consistent shingle spacing. Selectable trigger allows the tool to be switched between contact and sequential firing modes. Carbide nose inserts extend the life of the tool. Adjustable exhaust directs the air away from the user.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.