21 Greatest Stainless Steel Sheet Metal Screws

 

18-8 Stainless Steel Sheet Metal Screw Plain Finish Truss Head Phillips Drive Type AB 10-16 Thread Size 12 Length Pack of 50

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Truss Head, Phillips Drive, Type AB, #10-16 Thread Size, 1/2″ Length (Pack of 50)

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Truss Head, Phillips Drive, Type AB, #10-16 Thread Size, 1/2″ Length (Pack of 50) - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Truss head has an extra-wide low-profile domed shape for applications with minimal clearance. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood.

 

18-8 Stainless Steel Sheet Metal Screw Plain Finish Truss Head Phillips Drive Type AB 4-24 Thread Size 14 Length Pack of 100

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Truss Head, Phillips Drive, Type AB, #4-24 Thread Size, 1/4″ Length (Pack of 100)

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Truss Head, Phillips Drive, Type AB, #4-24 Thread Size, 1/4″ Length (Pack of 100) - Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Truss head has an extra-wide low-profile domed shape for applications with minimal clearance. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating.

 

18-8 Stainless Steel Sheet Metal Screw Plain Finish 82 degrees Flat Head Phillips Drive Type AB 4-24 Thread Size 38 Length Pack of 100

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, 82 degrees Flat Head, Phillips Drive, Type AB, #4-24 Thread Size, 3/8″ Length (Pack of 100)

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, 82 degrees Flat Head, Phillips Drive, Type AB, #4-24 Thread Size, 3/8″ Length (Pack of 100) - Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Flat head has an 82-degree cone shape for use in countersunk holes and a flat top that fits flush with the mated surface. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.

 

18-8 Stainless Steel Sheet Metal Screw Black Oxide Finish 82 degrees Flat Head Phillips Drive Type A 6-18 Thread Size 58 Length Pack of 100

18-8 Stainless Steel Sheet Metal Screw, Black Oxide Finish, 82 degrees Flat Head, Phillips Drive, Type A, #6-18 Thread Size, 5/8″ Length (Pack of 100)

18-8 Stainless Steel Sheet Metal Screw, Black Oxide Finish, 82 degrees Flat Head, Phillips Drive, Type A, #6-18 Thread Size, 5/8″ Length (Pack of 100) - 18-8 stainless steel provides good corrosion resistance and strength, and the black oxide finish offers mild corrosion resistance and lubricity. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Type a point has a conical tip and spaced threads that are suitable for forming threads in holes drilled in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Flat head has an 82-degree cone shape for use in countersunk holes and a flat top that fits flush with the mated surface.

 

18-8 Stainless Steel Sheet Metal Screw Plain Finish Truss Head Phillips Drive Type AB 10-16 Thread Size 1-34 Length Pack of 25

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Truss Head, Phillips Drive, Type AB, #10-16 Thread Size, 1-3/4″ Length (Pack of 25)

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Truss Head, Phillips Drive, Type AB, #10-16 Thread Size, 1-3/4″ Length (Pack of 25) - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Truss head has an extra-wide low-profile domed shape for applications with minimal clearance. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating.

 

18-8 Stainless Steel Sheet Metal Screw Plain Finish Truss Head Phillips Drive Type AB 6-20 Thread Size 38 Length Pack of 100

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Truss Head, Phillips Drive, Type AB, #6-20 Thread Size, 3/8″ Length (Pack of 100)

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Truss Head, Phillips Drive, Type AB, #6-20 Thread Size, 3/8″ Length (Pack of 100) - 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Truss head has an extra-wide low-profile domed shape for applications with minimal clearance. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood.

 

18-8 Stainless Steel Sheet Metal Screw Black Oxide Finish Pan Head Phillips Drive Type AB 14-14 Thread Size 1 Length Pack of 10

18-8 Stainless Steel Sheet Metal Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type AB, 1/4″-14 Thread Size, 1″ Length (Pack of 10)

18-8 Stainless Steel Sheet Metal Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type AB, 1/4″-14 Thread Size, 1″ Length (Pack of 10) - Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. 18-8 stainless steel provides good corrosion resistance and strength, and the black oxide finish offers mild corrosion resistance and lubricity. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Pan head has a flat top and short vertical sides with a rounded top edge.

 

18-8 Stainless Steel Sheet Metal Screw Plain Finish Truss Head Phillips Drive Type A 10-12 Thread Size 34 Length Pack of 50

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Truss Head, Phillips Drive, Type A, #10-12 Thread Size, 3/4″ Length (Pack of 50)

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Truss Head, Phillips Drive, Type A, #10-12 Thread Size, 3/4″ Length (Pack of 50) - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Truss head has an extra-wide low-profile domed shape for applications with minimal clearance. Type a point has a conical tip and spaced threads that are suitable for forming threads in holes drilled in thin metals between 0015″ and 0050″ thick and resin impregnated plywood.

 

18-8 Stainless Steel Sheet Metal Screw Plain Finish Truss Head Phillips Drive Type A 8-15 Thread Size 34 Length Pack of 100

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Truss Head, Phillips Drive, Type A, #8-15 Thread Size, 3/4″ Length (Pack of 100)

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Truss Head, Phillips Drive, Type A, #8-15 Thread Size, 3/4″ Length (Pack of 100) - Type a point has a conical tip and spaced threads that are suitable for forming threads in holes drilled in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Truss head has an extra-wide low-profile domed shape for applications with minimal clearance.

 

18-8 Stainless Steel Sheet Metal Screw Plain Finish Hex Washer Head Hex Drive Type AB 14-14 Thread Size 34 Length Pack of 10

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Hex Washer Head, Hex Drive, Type AB, 1/4″-14 Thread Size, 3/4″ Length (Pack of 10)

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Hex Washer Head, Hex Drive, Type AB, 1/4″-14 Thread Size, 3/4″ Length (Pack of 10) - Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Hex washer head has six flat sides that a wrench can grip from the side in low-profile applications and has a flange for additional bearing surface to distribute the force over the material being fastened. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Hex drive tightens from the side with a wrench, enabling use when there is no space above for a driver.

 

18-8 Stainless Steel Sheet Metal Screw Plain Finish  Button Head Pin In Star Drive Type AB 1 Length 12 Threads Made in US Pack of 25

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Button Head, Pin In Star Drive, Type AB, 1″ Length, #12 Threads, Made in US (Pack of 25)

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Button Head, Pin In Star Drive, Type AB, 1″ Length, #12 Threads, Made in US (Pack of 25) - Pin-in-star drive resists tampering by requiring a special driver to tighten or loosen the screw using the six-pointed indentation with center pin. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Made in us. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Button head has short vertical sides similar to a pan head screw but has a low-profile rounded head instead of a flat top.

 

18-8 Stainless Steel Sheet Metal Screw Plain Finish Hex Washer Head Slotted Drive Type AB 6-20 Thread Size 38 Length Pack of 100

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Hex Washer Head, Slotted Drive, Type AB, #6-20 Thread Size, 3/8″ Length (Pack of 100)

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Hex Washer Head, Slotted Drive, Type AB, #6-20 Thread Size, 3/8″ Length (Pack of 100) - 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Slotted drive has a linear slot for use with a flat-blade driver. Hex washer head has six flat sides that a wrench can grip from the side in low-profile applications and has a flange for additional bearing surface to distribute the force over the material being fastened. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood.

 

18-8 Stainless Steel Sheet Metal Screw Plain Finish Pan Head Phillips Drive Type AB 4-24 Thread Size 14 Length Pack of 100

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Pan Head, Phillips Drive, Type AB, #4-24 Thread Size, 1/4″ Length (Pack of 100)

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Pan Head, Phillips Drive, Type AB, #4-24 Thread Size, 1/4″ Length (Pack of 100) - 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Pan head has a flat top and short vertical sides with a rounded top edge. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.

 

18-8 Stainless Steel Sheet Metal Screw Black Oxide Finish Pan Head Phillips Drive Type AB 8-18 Thread Size 34 Length Pack of 50

18-8 Stainless Steel Sheet Metal Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type AB, #8-18 Thread Size, 3/4″ Length (Pack of 50)

18-8 Stainless Steel Sheet Metal Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type AB, #8-18 Thread Size, 3/4″ Length (Pack of 50) - Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Pan head has a flat top and short vertical sides with a rounded top edge. 18-8 stainless steel provides good corrosion resistance and strength, and the black oxide finish offers mild corrosion resistance and lubricity. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.

 

18-8 Stainless Steel Sheet Metal Screw Plain Finish Undercut 82 degrees Flat Head Phillips Drive Type AB 10-16 Thread Size 38 Length Pack of 50

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Undercut 82 degrees Flat Head, Phillips Drive, Type AB, #10-16 Thread Size, 3/8″ Length (Pack of 50)

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Undercut 82 degrees Flat Head, Phillips Drive, Type AB, #10-16 Thread Size, 3/8″ Length (Pack of 50) - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Undercut flat head has a flat top with a 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating.

 

18-8 Stainless Steel Sheet Metal Screw Plain Finish Hex Washer Head Hex Drive Type B 516-12 Thread Size 34 Length Pack of 5

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Hex Washer Head, Hex Drive, Type B, 5/16″-12 Thread Size, 3/4″ Length (Pack of 5)

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Hex Washer Head, Hex Drive, Type B, 5/16″-12 Thread Size, 3/4″ Length (Pack of 5) - Type b point has a blunt tip with fine spaced threads that are suitable for forming threads in holes drilled in 0015″- to 0050″-thick metals as well as nonferrous castings, plastics, and impregnated plywood. Hex washer head has six flat sides that a wrench can grip from the side in low-profile applications and has a flange for additional bearing surface to distribute the force over the material being fastened. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Hex drive tightens from the side with a wrench, enabling use when there is no space above for a driver.

 

18-8 Stainless Steel Sheet Metal Screw Black Oxide Finish Pan Head Phillips Drive Type AB 10-16 Thread Size 34 Length Pack of 25

18-8 Stainless Steel Sheet Metal Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type AB, #10-16 Thread Size, 3/4″ Length (Pack of 25)

18-8 Stainless Steel Sheet Metal Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type AB, #10-16 Thread Size, 3/4″ Length (Pack of 25) - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. 18-8 stainless steel provides good corrosion resistance and strength, and the black oxide finish offers mild corrosion resistance and lubricity. Pan head has a flat top and short vertical sides with a rounded top edge.

 

18-8 Stainless Steel Sheet Metal Screw Plain Finish Pan Head Star Drive Type A 8-15 Thread Size 34 Length Pack of 50

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Pan Head, Star Drive, Type A, #8-15 Thread Size, 3/4″ Length (Pack of 50)

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Pan Head, Star Drive, Type A, #8-15 Thread Size, 3/4″ Length (Pack of 50) - Pan head has a flat top and short vertical sides with a rounded top edge. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Type a point has a conical tip and spaced threads that are suitable for forming threads in holes drilled in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive.

 

18-8 Stainless Steel Sheet Metal Screw Plain Finish Pan Head Star Drive Type AB 10-16 Thread Size 12 Length Pack of 50

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Pan Head, Star Drive, Type AB, #10-16 Thread Size, 1/2″ Length (Pack of 50)

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Pan Head, Star Drive, Type AB, #10-16 Thread Size, 1/2″ Length (Pack of 50) - Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive. Pan head has a flat top and short vertical sides with a rounded top edge. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood.

 

18-8 Stainless Steel Sheet Metal Screw Plain Finish Pan Head Phillips Drive Type A 8-15 Thread Size 3-12 Length Pack of 10

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Pan Head, Phillips Drive, Type A, #8-15 Thread Size, 3-1/2″ Length (Pack of 10)

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Pan Head, Phillips Drive, Type A, #8-15 Thread Size, 3-1/2″ Length (Pack of 10) - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Type a point has a conical tip and spaced threads that are suitable for forming threads in holes drilled in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Pan head has a flat top and short vertical sides with a rounded top edge. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating.

 

18-8 Stainless Steel Sheet Metal Screw Plain Finish Pan Head Phillips Drive Type AB 4-24 Thread Size 12 Length Pack of 100

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Pan Head, Phillips Drive, Type AB, #4-24 Thread Size, 1/2″ Length (Pack of 100)

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Pan Head, Phillips Drive, Type AB, #4-24 Thread Size, 1/2″ Length (Pack of 100) - 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Pan head has a flat top and short vertical sides with a rounded top edge. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood.