20 Coolest Countersink Sets

 

Irwin Hanson AHN-1877791 5Piece Countersink Set - Package quantity 1. Excellent quality. Counter skin set. Great gift idea. 5 piece.

 

ZMZ 7Pcs Countersink Drill Bit Set Carpentry Reamer Drill Bit Woodwork - Seven piece set includes bits for drilling pilot holes for screw sizes 3mm, 4mm, 5mm, 6mm,7mm,8mm,10mm. 7 pieces woodworking countersink drill bit set reamer carpentry reamer core drill bit drill bit with countersink. Drilling length can be adjusted for various length screws simply by loosening and tightening the set. Chamfer is 5 flutes,in the process of using, can discharge the wood more rapid, sink hole disposable. Adjustable counter sleeve depth with wrench drill and countersink for wood screws without changing.

 

KKmoon 6pcs HSS 4341 Drill Tap Countersink Set Combination Deburr Bit High-Speed Steel Combined Tap and Drill 1/4″ Hex Quick Change Tapping Deburring Drill Bits Kit - Suitable for drilling & tapping wood, plank, aluminium plate or sheet iron. Back tapered beyond tap to prevent thread damage from over drilling. Hss 4341 sae combination tap and drill bit set. An essential hardware tool for woodworking using. All-in-one and multi-functional.

 

M.A.FORD 6 Flute Countersink Sets – Tool Material: High Speed Steel Included Angle: 82° No of Flutes: 6 - Smaller chip loads & chatter-free machining. For economical, general purpose countersinking, chamfering or deburring. Steam homo surface treatment (blackening) to prolong tool life and prevent galling. Made in usa.

 

CRL Four Piece Countersink Set – CS4 - 3 mm) shank diameter fits any 1/4″ or 3/8″ (6. Smooth drilling action from single cutting edge prevents chatter and fluted edges. They cut faster than standard countersinks and leave a finished hole every time. Crl countersinks were specifically designed to cut round countersunk holes in aluminum. The 1/4″ (6. 5 mm) drill chuck. 3 or 9.

 

4 Pc. M.A Ford 3/16″,7/16″,13/16″,1-1/8″x 82 Deg. “Zero” Flute Countersinks Set - Easily sharpened by using a small mounted grinding wheel inserted in the hole. Made in the usa. Contents include 82 degree pilotless/round csk6s, csk8s, csk10s, csk18 and case. Ideal for use in portable applications and materials, including metal, plastic and wood, especially in the glass and window design industry. Carbide tipped.

 

Amana TDS-500 5 Piece Countersink Drill Set - Contents include 82 degree pilotless/round csk6s, csk8s, csk10s, csk18 and case. Chatter less finish. Ideal for use in portable applications and materials, including metal, plastic and wood, especially in the glass and window design industry. Easily sharpened by using a small mounted grinding wheel inserted in the hole. Carbide tipped.

 

Snappy 43400 Chuck & Countersink Set 3 Piece - Two flute construction for fast & clean chip removal. Highlights- 3 piece. Made in usa by snappy. Alloy steel & thru hardened for long life, can be resharpened. Contains snappy part numbers 40011, 43007, 43008 & 43009. Two flute construction for fast & clean chip removal. The combination drill, countersink & counter bore for wood plugs are made of alloy steel & thru hardened for long life plus the ability to resharpened. The countersink angle is 82 degrees. The standard drill bit can be replaced or adjusted for the length of the screw. 7/64″ bit w/ 3/8″ counterbore. Allows you to quickly & easily change drill bits & accessories with no hassle or chuck key. Made in usa by snappy. The standard hex shank on the countersink fits all power bit quick change chucks.

 

Countersink Set, 5 PC, 1 FL, 82 Deg, HSS - Five flute design reduces vibration for smoother drilling and extended life. Precision-ground 90 degree tip for countersinking into wood plate or thin plastic plate. 1/4″ round shank fits all handheld and stationary drills. Noteplease do not use this chamfer on the metal material. Material high carbon steel.

 

Accusize – 3 Pcs/Set Indexable Carbide Countersink Set 82 Degree, 1/4”, 1/2”, 1-1/4”, #0046-0982 - 3 pcs indexable carbide countersink set, 82 degree, 1/4”, 1/2”, 1-1/4”, #0046-0982 3 pc set 82° positive rake makes for smooth cutting without chatter carbide indexable no tool resharpening needed. = 1-1/4″ max = 2-1/2″ with 3/4″ shank. = 3/4″ with 1/2″ shank 1/2″ cutter cut mini. = 1/4″ max. = 1/2″ max = 1-3/4″ with 1/2″ shank 1-1/4″ cutter cut mini. Comes with inserts 3 pcs/set 1/4”, 1/2”, and 1-1/4” 1/4″ cutter cut mini.

 

Rockler 18-Pc. Self-Centering & Countersink Set - Bits can be resharpened easily on a bench grinder. Step 2 slip on the rockler insty-driver which fits over rockler countersink and self-centering bits. 18-piece rockler/insty-drive self-centering and countersink set lets you convert from drilling and countersinking to installing perfectly centered hinge screws in a matter of seconds, without re-chucking any bits the 18-piece set includes #6, #8 and #10 hss 2-flute tapered hex shank bits with 4-flute countersinks #6, #8 and #10 hex shank hss self-centering bits rockler’s insty-driver 10 of the most popular drive bits and a nylon pouch with belt loop. How the rockler/insty-drive system works step 1 drill the pilot hole with the countersink bits or the self-centering bits, which both have a hex shank to prevent slipping. All rockler/insty-drive bits are precision-ground high speed steel that resist wear and overheating, thus keeping a sharp edge longer. Then slip off the insty-driver and do it again. Magnetic tip holds all 1/4” style insert bits and screws. Components are engineered to meet the highest standards for use in industrial applications. Countersink has a 4 flute design for smooth, clean holes that do not require sanding. Inluded self-centering bits ensure accurate hinge and hardware installation every time. You’ll get fast and accurate hardware installation every time. Taper drill bit is adjustable to match length of screw and is held with 1 or 2 hex set screws. Switch from drilling to driving instantly just drill the pilot hole, slip on the insty-driver and drive home the screws. Step 3 drive home the screws.

 

AUTOTOOLHOME New 5pcs Center Drill Countersink Set 60 Degree Angle Bits HSS Lathe Mill Press - 12″) body diameter & 1mm(0. 15mm(0. 06″) drill tip diameter #3 with 6mm(0. Material hsscolor silver tonethis very good quality 4 set which includes the following most popular commonly used screwhead sizes#6 #8, #10 & #12high speed steelstandard 60 degree included angleprecision importdouble ended usagecenter and spotting drills are traditionally used to make a conical hole for a lathe center in order to make a starting point for a standard twist drill, designed to prevent the twist drill from walkingused for producing center holds in components or work pieces with require machining between centers specificationthis listing is for a set of 5 hss center drillsit includes 1 each of sizes #1, #2, #3, #4 and #5each drill has a double end and is ground with a standard 60 degree included anglethe set includes 1 each of the following sizes #1 with 3mm(0. 47″) body diameter & 5mm(0. Features100% high quality and brand new. 5mm(0. 24″) body diameter & 2. 04″) drill tip diameter #2 with 4mm(0. 2″) drill tip diameter package includes1x a set of 5 hss center drills(packed safely in bubble bag. 32″) body diameter & 3. ). 5mm(0. 1″) drill tip diameter#4 with 8mm(0. 16″) body diameter & 1. 124″) drill tip diameter #5 with 12mm(0.

 

HHIP 2000-0031 5 Piece (82 Degree-1/4~1 Inch) HSS Countersink Set - For portable and machine work when operated at comparatively high speeds. 82 degrees hss. High speed steel or cobalt 5 pc sets 1/4, 3/8, 1/2, 3/4 & 1″. 5 pc sets 1/4, 3/8, 1/2, 3/4 & 1″single flutes will countersink holes much smaller than multi-flute tools high speed steel or cobalt.

 

IRWIN Tools Black Oxide Countersink Drill Bit, 5-Piece Set (1877791) - 1/4-inch round shank fits all handheld and stationary drills. Precision-ground 82-degree tip drills countersink holes into most machinable metals, as well as wood and plastic. Made from industrial grade high-speed steel for increased durability black oxide finish adds corrosion resistance. Five-flute design reduces vibration for smoother drilling and extended bit life.

 

Irwin Tools 1890451 Countersink Wood Drill Bit Set, 19-Piece - Adjustable four-cutter counter bore cuts and clears chips quicker for fast, smooth countersinking. Adjustable stop collar attaches to counter bore with two hex screws for a secure fit and can be adjusted for desired counter bore depth. Counter bore attaches to flats on shank with two hex screws for a secure fit and can be adjusted for controlled pilot hole depth. 1/4″ quick-change shank reduces slipping in standard chucks and is compatible with all 1/4″ quick-change chucks, including impact drills. Tapered drill with widened flutes for drilling fast, clean pilot holes and ensures tight fit for screws.

 

KEO 53519 Cobalt Steel Single-End Countersink Set, Uncoated (Bright) Finish, 82 Degree Point Angle, 5/16″ – 1″ Head Diameter - Straight shank, cnc precision cam ground, m35 cobalt, chatter-free cutting action. 82 degree angle. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Made in great britain. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.

 

Snappy Tapered Countersinking Drill Set - The addition of a quick release hex drive chuck is recommended for optimum speed and efficiency. Snappy tapered bits allow you to get maximum grip from your wood screws. With the added convenience of 1/4′ hex drive youll find yourself flying through drilling and driving operations. Sized for #6, #8, and #10 screws.

 

Makita 784827-A Quad-Driver 4-Piece Reversible and Self-Centering Pre-Drill, Drive and Countersink Set - Makita 4 piece quad driver reversible, self-centering drill and driver guide set. Patent bit-lok system holds screwdriver bits securely easily transform from a drill and countersink to power screwdriver. Self-centering drill bit provides perfect mounting of hinges, strikeplates, brackets, and latches. Includes quad driver shaft, built in hex key, number 6, 8, and 10 drivers, and case. Backed by makita’s 1-year warranty.

 

AccusizeTools – 6 Flute HSS Machine Countersink 8 Pcs/Set 82 Degree, Precision Ground, #0206-1018 - Angle 82°. Made of hss and precision ground. One of each 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8” & 1”. 8 pcs/set.

 

4PC Countersink Bit Set - Jore corporation. Jore #st-05714 4pc countersink bit set.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.