20 Coolest Arbor Presses

 

SWAG Arbor Press Plates (Pair) (7″ X 7″) - 0″ ideal size for factory replacement of the 12 ton harbor freight cast arbor plates 8. Cut out of high strength grade 50-a572 steel plate. Office where i got 8 stitches. When i returned to the shop i was looking at the press and noticed the porous nature of the arbor plates. These arbor press plates are to replace the junk cast arbor plates that are prone to shattering under heavy load. I was told i was very lucky i didn’t lose my eye. 50″ the low cost cast arbor plates that are typical provided with hydraulic presses, often fail under shock loading. One of the guys in the shop came over to check on me and said “dude you’re face is bleeding” i had a gash right next to my left eye. We currently offer 4 different sizes of arbor plates 7. 50″ 12. About 1/4″ left to go i gave one good pull and i heard pow i felt like i had been punched in the face by a gorilla as the cast arbor plate had just exploded. 75″ x 1. 00″ x 7. 75″ x 9. 00″ x 12. I was driven to the dr. 00″ x 1. I felt the bushing starting to get stiff. “I was pressing on a bushing using a harbor freight 20 ton press with the provided cast arbor plates. 50″ ideal size for factory replacement of the 20 ton harbor freight cast arbor plates 9. 00″ x 1. 0 on pirate4x4 who was generous enough to provide the story below. “. This was the day i learned about the material properties of cast iron. 00″ x 1. 50″ x 10. Learn from others and look at the 3rd picture above provided by mud slayer 2.

 

Dake 1-1/2B Model Ratchet Leverage Arbor Press with Handwheel and Counterweight, 3 Ton Capacity, 18.25″ Maximum Working Height, 8.25″ Length x 21″ Width x 28″ Height - Handwheel quickly advances the ram for initial positioning, and the ratcheted lever lowers the ram onto the object and can be set at a comfortable position for the user. Smooth action gears enable fine control over ram movement with the lever. Open base and slotted table plate provide support for solid objects as well as an outlet for arbors and similar items to pass through. Counterweight repositions the lever to the top after a downstroke to reduce strain and quickly prepare for the next task. Ratcheted lever lowers the ram to provide up to 3 tons of force.

 

Kaka Arbor Press, 1 Ton Cast Iron Arbor Press, 4″ Height Heavy Duty Arbor Press - Dake 11-1/2″ table distance 3 ton capacity single-leverage. Dake 11-1/2″ table distance 3 ton capacity ratchet lever arbor press.

 

Klutch Arbor Press – 3-Ton Continuous Force - 12 1/4. Press height in. 1 1/2 x 1 1/2, base l x w in. Largest arbor in. 1-2, ratio 201, continuous force tons 3, ramp length in. This klutch arbor press is a strong, precise press that applies the pressure essential for seating, stamping and removing bearings and performing other high-pressure assembly, repair and production jobs. Applies 3 tons of continuous force to handle the extra tough jobs durable cast iron construction solid anvil surface for tough pounding and shaping tasks. 8 1/8 x 8 1/2, max. 17, ram square in.

 

Palmgren Arbor press heavy duty work stand - It has a slot on the top for pieces which need to extend below the base of the press table. The palmgren arbor press #70 i 03 arbor press stand provides a sturdy base and optimal height for easy operation. Stand comes with built-in cup for catching expressed pieces base and top are cast iron with a body of welded steel fits all 2, 3 and 4 ton presses   [custom1] specification description model rs30 top dimensions 11-3/4 in x 21-15/16 in base dimensions 11-15/16 in x 22-3/16 in height 36 in weight 88 lb [/custom1].

 

4″ SLOTTED WHEEL PLATE 1/2″ THICK TOOL PART FOR ARBOR PRESS - Extra part for 1/2 ton arbor press. 1/4″ diameter/height. I have several of these for sale. This is the anvil plate and it measures 3 3/4″ diameter and 1/2″ thick, and has a little “stem” for lack of a better word on one side (see pics) that is approx. Very heavy metal (i think it’s steel but i’m not sure, could be cast iron). Note they have protective grease coated on them (some more than others). It is slotted for a variety of uses.

 

Palmgren Arbor press, 0.5 ton - Solid iron construction with stress-relieved design replaceable jaw plates. Punches or tools may be added to the end of the ram with the aid of a magnetic insert. Less than 0002″ jaw deflection at 2,000 lbs clamping pressure jaw surfaces square to 0002″. Made from fc25, fine grain cast iron trapezoidal-thread lead screw.

 

Palmgren Arbor press, 1 ton - Equipped with a hand wheel to perform light and quick press work. Adjusting screw for custom clamping force precision-ground guide bars for smooth, precise travel and clamping jaw surfaces square to 0002″. Solid iron construction with stress-relieved design replaceable jaw plates. Made from fx25, fine grain cast iron hardened cam mechanism permits up to 1,500 lbs of clamping pressure.

 

Palmgren 5-1/2″ Table Distance 1 Ton Capacity Arbor Press - Includes three piece bit set, 1 pointed, 1 round, and 1 square end bit, and a removable steel anvil. Palmgren 5-1/2″ table distance 1 ton capacity arbor press. Rugged steel ram is driven by a machined pinion. Sturdy, cast-iron construction. Base drilled for mounting on a bench or pedestal.

 

HHIP 8600-0131 Pro-Series Cast Iron Arbor Press, 1 Ton Capacity, 14″ Height (Pack of 1) - Base drilled for mounting on bench or pedestal. Removable machined steel anvil provides accurate work support in four slot positions. Sturdy, cast-iron construction. Rugged steel ram is driven by machined pinion. For riveting, squeezing, punching, bending, and other pressing applications.

 

Kaka Industrial Mp-1 1 Ton Capacity Arbor Press - Travel 5 inches. Material max height 10 inches. 1 ton arbor press. Do the pressing effortless by turning handles. Material max diameter 7 inches.

 

JET AP-5 5 Ton Arbor Press - For all production and assembly applications. Arbor presses. Precision cut steel rams and pinions for accurate operation. Tables and slotted table-plates are flat and parallel to provide accurate support.

 

Dake 00 Model Single Leverage Arbor Press with Base Opening and Slotted Table Plate, 1 Ton Capacity, 5″ Maximum Working Height, 4.25″ Length x 9″ Width x 9.375″ Height - Ram cap can be adjusted using the two included shims to compensate for wear. Adjustable handle can be positioned for a comfortable grip or to attain maximum leverage. Lever lowers the ram to provide up to 1 ton of force. Open base and slotted table plate provide support for solid objects as well as an outlet for arbors and similar items to pass through. Smooth action gears enable fine control over ram movement with the lever.

 

Dayton 5Z077 Press, Arbor, 4 Ton - Force in tons 4 base size (in) 10-3/4 x 21-&quot/8 width (in) 10-3/4&quot anvil dia work area (in) 9-1/2 table work surface (in) 10 x 10-1/4&quot swing (in) 16-3/4&quot country of origin (subject to change) china. Price for each construction cast iron features removable 4 position rotating anvil, large-toothed rack a magnetic insert to hold the punch range of slot widths (in) 3/4 to 2-3/4 ram dimensions (in) 1-3/4 x 1-3/4&quot max work height (in) 15-3/4&quot item arbor press height (in) 27-1/4&quot ram hole dia x depth (in) 1/2 x 1&quot depth (in) 21-1/8&quot.

 

HHIP 8600-0031 Heavy Duty Arbor Press, .5 Ton Capacity, 10″ Height (Pack of 1) - 4. 5-inches capacity over table. Steel pinions. Base measures 9-inches length by 4-inches width. Precision made. 6. Hhip heavy duty arbor press. 4 position steel anvil. 10-inches press height. 5-inches maximum diameter. 5 ton capacity.

 

1 Ton Arbor Press - Precision made. Heavy stub teeth. The “maximum work diameter” dimension is twice the distance from the center of the ram to the back of the throat. Steel rams + pinion. . Heavy castings.

 

HHIP 8600-0138 Deep Throat Lever Arbor Press, .25 ton Capacity, 12″ Length x 5″ Width Base, 7.6″ Height (Pack of 1) - Utilizes a 5/8-inches diameter precision ground ram, press consists of a ground cast iron base and separate column. The base consists of two mounting holes for 25-inches socket cap screw. Throat clearance 6-inches. Adjustable down stop. Up stroke limiter 25 ton press capacity.

 

Palmgren Arbor press, 3 ton - 91 swing 11- 3/4 in anvil diameter 6- 3/4 in max work height 12, 1/2 in ram dimensions 1- 1/2 x 1- 1/2 in height 21- 1/2 in base dimensions 9- 1/2 x 17- 3/4 in weight 135 lb [/custom1]. Depth stop securely clamps to the ram and withstands full pressure. Delivers the heavy force needed for riveting, squeezing, punching, bending, and other pressing applications. Sturdy, cast-iron construction rugged steel ram is driven by a machined pinion base drilled for mounting on a bench or pedestal includes three piece bit set, 1 pointed, 1 round and 1 square end bit, and a removable steel anvil the base is machine to hold the three bit set   [custom1] specification description model ap30 force 3. A lockable fine adjustment adjusting screw accurately limits the depth of the ram stroke. Removable machined steel anvil provides accurate work support in four slot positions. The ram is reversible with one end solid and the other end with a hole and magnet to hold bits and tools. Punches or tools may be added to the end of the ram with the aid of a magnetic insert. 0 ton lever ratio 16.

 

JET AP-3 3 Ton Arbor Press - Arbor presses. Tables and slotted table-plates are flat and parallel to provide accurate support. Precision cut steel rams and pinions for accurate operation. For all production and assembly applications.

 

Palmgren Arbor press, 0.5 ton by Palmgren - Dake 11-1/2″ table distance 3 ton capacity single-leverage. Palmgren arbor press, 05 ton.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.