19 Top Carbide Router Bits

 

35 Pcs Tungsten Carbide Router Bit Set Woodworking Wood Carpentry ATE Tools - . The can be use for different groove and profile cuts in solid wood, glued boards and hard plastics. They are available with or without ball bearing pilots. Professional for wood working. Quantity 1. They last several times longer than hss bits. Router bit with tungsten carbide cuttings edges are specially suitable for use with tough abrasive materials. Carbide- tipped router bits.

 

Hiltex 10100 Tungsten Carbide Router Bits | 15-Piece Set - Perfect for edging, trimming, veining and grooving in all woodworking projects for both professional carpenters and hobbyists. Enclosed bearing roller for smooth and aligned operations. Comes with wooden index case for easy storage and organization. Precisely machined sharp yg8 tungsten carbide blade makes clean and accurate cuts on all types of wood with excellent resistance to heat. Hardened solid alloy steel main construction with power coating finish for durability and longevity. 1/4 inch universal shank fits all models of routers.

 

SKIL 91018 18-Piece Carbide Router Bit Set in Wooden Storage Case - Controlled depth of cut minimizes kickback. Precision ground cutting edges stay sharper. Replacement bearing and hex key included. Fully heat treated shanks and bodies for durability. 1/4-inch shank.

 

CNBTR 1/2″ Red Shank Carbide Steel Router Bit Set Woodworking Cutter Trimming with Wood Case Box Pack of 15 - 1/2″” shank,sealed bearings,smooth accurate cuts. Safety instructions razor blades permanently enclosed in a cartridge or housing with less than 2mm of blade exposed the bladed product is not use for people under 18 years the item is only use for industrial cutting/engraving, not hazardous article. All heat-treated blade, with high concentricity and strong refused torsion. Set contains a selection of popular bit profiles.

 

Yonico 14101q Flush Trim Piloted Double End Solid Carbide Router Bit 1/4-Inch Shank - Once the bit has dulled on one end, flip it over for a new sharp cutting edge. The piloted ends are polished and ultra smooth which act as guides for bottom patterns and templates while the shank above the cutting edge can also be used as a guide for top patterns and templates without causing friction or wood burn. Use the yonico solid c3 carbide double ended piloted flush trim router bit for trimming counter top laminates, veneers, and any thin face-top finishes up to 1/4″ thickness. 1/4″ shank.

 

Amana Tool 45200 Straight Plunge 1/8-Inch Diameter by 7/16-Inch Cutting Height by 1/4-Inch Shank Solid Carbide Router Bit - 1/8-inch cutting diameter. Solid carbide, industrial quality. New superior geometric design for super clean cuts. 7/16-inch cutting height, 2-inch length. 1/4-inch shank, 2 flute.

 

Amana Tool 45312 Straight Plunge 1/2-Inch Diameter by 2-Inch Cutting Height by 1/2-Inch Shank Solid Carbide Router Bit - 1/2-inch cutting diameter. 1/2-inch shank, 2 flute. 2-inch cutting height, 4-1/4-inch length. Carbide tipped, industrial quality. New superior geometric design for super clean cuts.

 

Amana Tool 51200 Panel Pilot Flush 1/4-Inch Diameter x 1/4-Inch Cutting Height x 1/4-Inch Shank 1-Flute Solid Carbide Router Bit - Solid carbide and integral pilot (no bearing to maintain) extend life of router bit, slim configuration reduces vibration. Amana 51200 specifications diameter 1/4″ carbide height 1/4″ shank 1/4″ length 1-1/2″ type of cut flushamana 51200 features here’s the ideal laminate trimming router bit for high volume production. Suitable for routers and trimmers.

 

Neiko 10115A Premium Tungsten Carbide Router Bits | 80-Piece Set | Aluminum Storage Case - Premium 1/2 inch universal shank fits all models of routers. Enclosed bearing roller for smooth and aligned operations. Precisely machined sharp yg8 tungsten carbide blade makes clean and accurate cuts on all types of wood with excellent resistance to heat. Comes with heavy duty aluminum index case for easy storage and organization. Perfect for edging, trimming, veining and grooving in all woodworking projects for both professional carpenters and hobbyists. Hardened solid alloy steel main construction with power coating finish for durability and longevity.

 

Yonico 14102q Bevel Trim 7-Degree Piloted Solid Carbide Router Bit 1/4-Inch Shank - Solid hardened steel bodies with anti-kickback design. Build-up & heat resistant teflon coating. C3 micro-grain tungsten carbide cutters. Satisfaction guaranteed and lifetime warranty. Build-up and heat resistant teflon coating. Satisfaction guaranteed & lifetime warranty. Industrial quality router bits.

 

Amana Tool 45783 Carving Liner Single Flute Solid Carbide Router Bit, 1/4-Inch Shank - Cutting diameter 1/4-inch, 5/8-inch cutting height. Solid carbide, industrial quality. 1/4-inch shank, single flute. 18-degree angle.

 

Neiko 10106A USA Tungsten Carbide Router Bit Set (15 Piece) - 15pc tungsten carbide router bit set. Flush trim bit 1/2″,corner round bit3/4″, cove bit1″,45degree chamfer bit1/2″, roman ogee bitr5/32″,slot cutter bit3/8″,dovetail bit1/2″. Straight bit1/4″, 1/2″, 3/4″ mortising bit1/2″, panel pilot bit 1/4″, carbide bevel trim bit5/16″.

 

Vermont American 23000 Carbide Router Bit Set, 6-Piece - This product adds a great value. . 6 piece, carbide tip router bit set, includes 1/4″ straight, 3/8″ straight, 1/2″ straight, 3/8″ round over, 5/32″ roman ogee & 1/4″ corebox, plastic storage case. This product is manufactured in china. Product is highly durable and very easy to use.

 

Amana Tool 45448 Straight Plunge 1-Inch Diameter by 1-1/4-Inch Cutting Height by 1/2-Inch Shank Solid Carbide Router Bit by Amana Tool - 1/8″ shank fits most rotary tools and cnc routers. Premium micro grain carbide. Fishtail plunge points for precision. Amana tool 45448 straight plunge 1-inch diameter by 1-1/4-inch cutting height by 1/2-inch shank solid carbide router bit.

 

24 Piece Carb-Tech Carbide Router Bit Set - Roman ogee bits 3/8″ & 1/2″ radius cove bits 1/2″ panel pilot bit, 1/2″ plunge bit, & 1/2″ flush trim bit 1/8″, 3/16″, 3/8″ & 1/2″ radius round over bits 1/4″ slotting & 3/8″ x 1/2″ rabbeting bits 9/16″ cl 45° chamfering bit 1/2″ shank industrial quality fitted wooden case. Features high quality c2 carbide tipped bits 1/4″, 3/8″, 1/2″ and 3/4″ dia. V groove bits 1/4″ & 1/2″ round nose bits laminate trimming & 1- 1/16 diam. Straight bits 3/8″ & 1/2″ 14° dovetail bits 1/2″ bevel trim & 1/2″ dia.

 

Ougar8 Radius 0.5 0.75 1 1.5 2 3 4 CNC Milling Cutter 2F Tungsten Carbide TiAlN Coated 2 Flutes Ball Nose End mill Endmills HRC45 Spiral Micrograin solid carbide Router bits(7pcs/Lot) - 4for cnc,engraving machinecarbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc. 2hra92,2 flutesmax cutting material hardnesshrc45. 3coating witn tialn can cutting harden materiel, 3 times durable than carbide. 1material tungsten carbide tialn coated. 5package 7x end mill cutter cnc bits.

 

SKIL 91400 1/4-Inch Rabbeting Carbide Router Bit, 3/8-Inch BB 2F 1/4-Inch Shank - Controlled depth of cut minimizes kickback. Fully heat-treated shanks and bodies for durability. Precision ground solid carbide cutting edges.

 

Amana Tool 45418 Straight Plunge 1/2-Inch Diameter by 1-Inch Cutting Height by 1/2-Inch Shank Carbide Tipped Router Bit - 1-inch cutting height, 2-5/8-inch length. New superior geometric design for super clean cuts. 1/2-inch cutting diameter. 1/2-inch shank, 2 flute. Carbide tipped, industrial quality.

 

XtremepowerUS 50-piece 1/4 Inch Tungsten Carbide Router Bit Set - 50 piece tungsten 1/4″ shank router bit set tungsten carbide tipped 1/4″ shank including but not limited to straight bits 3/16″, 1/4, 5/16″, 3/8″, 1/2″, 5/8″, 3/4″ v groove 3/8″, 1/2 dovetail 1/2″, 9/16″ cove box 1/8″, 3/16″, 1/4″ panel pilot 1/4″ .

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.