Gear and Pulley Puller with 5-1/2″” Screw
- . The estimated shipping cost will include this fee. Features and benefits perfect for removing timing gears, fan pulleys, harmonic balancers, and many other parts having tapped holes puller will spread from 1-1/2″ to 4-1/4″ puller block is 4-7/8″ wide includes two hex head cap screws, 3/8″, 16 x 3″ this product meets the large package requirement per ups/fedex.
RC Toy Car Airplane Orange Plastic DIY Belt Drive Gear Pulley 20 Pcs
- The motor shaft diameter is 2mm. 0mm. It can be connected with motor axle diameter 2. 7mm width belt. Wonderful accessories for diy rc model, such as rc airplane toy ,rc helicopter, toy car and so on. Featureorange plastic belt pulley, 17mm diameter, 2mm aperture, and it is fit for 1.
Boston Gear PL3120NF090 Timing Pulley for 9mm Wide Belts, 120 Groves, 0.375″ Bore Diameter, 4.481″ Outside Diameter, 0.875″ Overall Length, Lexan
- Pulleys must match the belts that connect them (timing pulleys with trapezoidal grooves require a belt with trapezoidal teeth) and engage either on the sides of the pulley flange (classical v-belts, narrow v-belts, or round belts), on the flat outer diameter of the pulley (flat belts), or in pulley grooves that match belt teeth (timing belts, synchronous belts, or curvilinear belts). The fiberglass-reinforced polycarbonate resin thermoplastic provides light weight and low noise. Pulleys (sheaves) are available in different types v-belt, timing, round, or flat. Boston gear manufactures gears, gear drives, bearings, valves, shaft collars, couplings, and other power and fluid transmission components. The company, founded in 1877, is headquartered in charlotte, nc, and meets international organization for standardization (iso) standard 90012008 standard. Timing pulleys are a type of drive pulley and are used in a wide range of mechanical and electronic drives, including automotive and printing industries. Pulleys are made of various materials, including cast iron, steel, aluminum, polycarbonate resin thermoplastic, and nylon, and they can meet a broad range of requirements, including increased torque, resistance to wear, and light weight. Pulleys are used in drive designs in the automotive, appliance, agriculture, textile, printing, mining, and office equipment industries. 375″ bore diameter and mounts to a drive shaft using setscrews. This boston gear plb series timing pulley has either a 3 mm or 5 mm pitch, and is suitable for use with 9 mm wide curvilinear tooth belts in power transmission applications that require synchronous rotation. Pulley drive systems consist of two or more pulleys that connect with a belt to transmit mechanical power across greater distances than systems that use gears. This polycarbonate resin thermoplastic pulley has an aluminum insert with a 0.
New 3pc 3 Jaw Gear Pulley Bearing Puller Set 3″ 4″ 6″ Small Leg Large Mechanics
- — Reversible jaws for inside and outside pulls. — Sizes 3″, 4″ , and 6″. Description — drop forged high carbon steel reversible legs and body. — For removing gears, sprockets, bearings, pulleys, and much more. — Heat treated for added strength. — hex head forcing screws suitable for use with ratchet wrench or combination spanner.
CTA Tools 8097 Large Gear and Pulley Puller
- Puller spreads from 2-inch / 2-centimeter to 7-3/4-inch / 20-centimeter. Heavy-duty construction allows for strength and durability. Removes parts having tapped holes, such as gears, pulleys, etc. Yoke is 8-1/4-inch or 21-centimeter long. Forcing screw is 11-5/8-inch or 30-centimeter long.
Boston Gear PA5060NF150 Timing Pulley for 15mm Wide Belts, 60 Groves, 0.375″ Bore Diameter, 3.715″ Outside Diameter, 1.188″ Overall Length, Aluminum
- Flangeless pulley for use where belt side thrust is not an issue. Grooved design for applications requiring synchronous rotation. Stock bore with 0375″ diameter does not require use of a bushing. 5mm pitch profile for use with same-pitch curvilinear tooth 15 mm wide belts. Clear anodized aluminum for light weight and corrosion resistance.
New 3pc 3 Jaw Gear Pulley Bearing Puller Set 3″ 4″ 6″ Small Leg Large Mechanics
- Adopt high quality aluminum, excellently machined, finished smoothly. 20t 8mm bore aluminum gt2 timing belt pulley. Use for 6mm width belt with a hexagon wrench. Two screw are provided for each pulley. 3 jaw gear pulley bearing puller set 3′ 4′ 6′ small leg large mechanics.
3pc 3 Jaw Gear Pulley Bearing Puller Set 3 4 6 Small Leg Large Mechanics by Pulley Hoists
- — reversible jaws for insi. Description — drop forged high carbon steel reversible legs and body.
Boston Gear G1215 Grooved Pulley, Fits Round Belts 0.1875″ or Smaller, 0.250″ Face, Brass
- Pulleys are made of various materials, including cast iron, steel, aluminum, polycarbonate resin thermoplastic, and nylon, and they can meet a broad range of requirements, including increased torque, resistance to wear, and light weight. Pulley drive systems consist of two or more pulleys that connect with a belt to transmit mechanical power across greater distances than systems that use gears. Pulleys are used in drive designs in the automotive, appliance, agriculture, textile, printing, mining, and office equipment industries. Pulleys must match the belts that connect them (timing pulleys with trapezoidal grooves require a belt with trapezoidal teeth) and engage either on the sides of the pulley flange (classical v-belts, narrow v-belts, or round belts), on the flat outer diameter of the pulley (flat belts), or in pulley grooves that match belt teeth (timing belts, synchronous belts, or curvilinear belts). The company, founded in 1877, is headquartered in charlotte, nc, and meets international organization for standardization (iso) standard 90012008 standard. Pulleys (sheaves) are available in different types v-belt, timing, round, or flat. Boston gear manufactures gears, gear drives, bearings, valves, shaft collars, couplings, and other power and fluid transmission components.
Boston Gear G1219 Grooved Pulley, Fits Round Belts 0.1875″ or Smaller, 0.250″ Face, Brass
- Pulleys (sheaves) are available in different types v-belt, timing, round, or flat. Pulleys are used in drive designs in the automotive, appliance, agriculture, textile, printing, mining, and office equipment industries. . Boston gear manufactures gears, gear drives, bearings, valves, shaft collars, couplings, and other power and fluid transmission components. The company, founded in 1877, is headquartered in charlotte, nc, and meets international organization for standardization (iso) standard 90012008 standard. Pulley drive systems consist of two or more pulleys that connect with a belt to transmit mechanical power across greater distances than systems that use gears. Pulleys are made of various materials, including cast iron, steel, aluminum, polycarbonate resin thermoplastic, and nylon, and they can meet a broad range of requirements, including increased torque, resistance to wear, and light weight. Pulleys must match the belts that connect them (timing pulleys with trapezoidal grooves require a belt with trapezoidal teeth) and engage either on the sides of the pulley flange (classical v-belts, narrow v-belts, or round belts), on the flat outer diameter of the pulley (flat belts), or in pulley grooves that match belt teeth (timing belts, synchronous belts, or curvilinear belts).
4 PCS Gear Puller Set 3″ 4″ 6″ 8″ – 3 Jaws Bearing Puller Mechanic Gear Pulley
- 4 pcs gear puller set 3″ 4″ 6″ 8″ pulley for removing gears, sprockets, bearings, pulleys, and much more drop-forged high carbon steel reversible legs and body reversible jaws for inside and outside pulls heat treated hex head forcing screws suitable for use with ratchet wrench or combination spanner specifications color silver and black pulley sizes 3″ 4″ 6″ 8″ material forged steel weight 9. 84 lbs.
CTA Tools 8097 Large Gear and Pulley Puller by CTA Tools
- Drop forged high carbon steel reversible legs and body — reversible jaws for inside and outside pulls. Cta tools 8097 large gear and pulley puller. Heat treated for added strength. Hex head forcing screws suitable for use with ratchet wrench or combination spanner.
Boston Gear PLB5015DF09-3/8 Timing Pulley, 5 mm Pitch, 9 mm Wide Belts, 15 Grooves, 0.375″ Bore Diameter, 0.895″ Outside Diameter, 0.813″ Overall Length, Lexan with Aluminum Insert, Double Flange
- Fiberglass-reinforced polycarbonate resin thermoplastic for light weight and low noise. Grooved design with 15 grooves for applications requiring synchronous rotation. Double flange to resist belt side thrust and maintain belt contact. 5 mm pitch profile for use with same-pitch curvilinear tooth 9 mm wide belts. Stock bore with 0375″ diameter does not require use of a bushing.
Bearing Puller Separator Set 2″ & 3″ Splitters Long Jaw Gear Pulley Removal Bar
- Pecifications： material steel, iron, plastic / overall size 37 x 24 x 6cm /145 x 94 x 24″ (lxwxh) / gw 59 kg / 1298 lb / quantity 14 pcs. Extension legs 4″, 4pcs / yoke center adapter 6″, 1pcs / puller head bar 69″, 1pcs / hooks 2pcs / forcing screws. Features 1) heavy duty drop forged and heat treated 2) 2″ and 3″ bearing separators 3) 4 sets of hex push-puller legs 4) 5″ puller cross bar with forcing screw 5) molded storage and carrying case. Packing list 1 x tool box. Product details (14pcs) drop forged construction / two bearing separator jaws (splitters), 2″ & 3″ / extension legs 5″, 4pcs /.
Boston Gear PLB5020DF09-1/4 Timing Pulley, 5 mm Pitch, 20 Grooves, 9mm Wide Belts, 0.250″ Bore Diameter, 1.208″ Outside Diameter, 0.813″ Overall Length, Lexan with Aluminum Insert, Double Flange
- 5 mm pitch profile for use with same-pitch curvilinear tooth 9 mm wide belts. Stock bore with 0250″ diameter does not require use of a bushing. Fiberglass-reinforced polycarbonate resin thermoplastic for light weight and low noise. Grooved design with 20 grooves for applications requiring synchronous rotation. Double flange to resist belt side thrust and maintain belt contact.
Gear/Pulley Puller, 2 or 3 Jaw, 7″” Maximum Opening Width, 5-1/2″” Maximum Reach tool & industrial
- . The shipping weight reflected is the dimensional weight. This product meets the oversized requirement per ups/fedex. This product also meets the large package requirement per ups/fedex. The estimated shipping cost will include this fee. Gear/pulley puller, 2 or 3 jaw, 7″” maximum opening width, 5-1/2″” maximum reach.
ONE Browning sprocket bearing steel timing gear pulley 21LB075 030045 2-1 LB075
- Grenade grip for better handling. Releases thread lock compounded nuts, frozen manifold bolts, bearings and more. Completely hand-held, ergonomic, grenade style grip and a bright led to illuminate work area. Also great for hail dent removal. Led at terminal end provides for work area illumination. Operates on standard 110v/10 amp circuit. Heats ferrous and some non-ferrous metals without the danger of an open flame using invisible heat. Works with all the mini-ductor coils and attachments. The mini-ductor ii 120v/20a/1,000w hand held induction power inverter.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
