Top 25 Reduced Shank Drill Bits for 2020

 

Drill America 58 Cobalt Reduced Shank Drill Bit with 38 Shank DACO Series

Drill America 5/8″ Cobalt Reduced Shank Drill Bit with 3/8″ Shank, D/ACO Series

Drill America 5/8″ Cobalt Reduced Shank Drill Bit with 3/8″ Shank, D/ACO Series - Manufactured to national aerospace standard 907. Round shanks allow use with a wide variety of toolholding systems. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

Drillco 1000EC Series Cobalt Steel Reduced-Shank Drill Bit Bronze Finish Round Shank with Flats Spiral Flute 135 Degree Split Point 916 Size

Drillco 1000EC Series Cobalt Steel Reduced-Shank Drill Bit, Bronze Finish, Round Shank with Flats, Spiral Flute, 135 Degree Split Point, 9/16″ Size

Drillco 1000EC Series Cobalt Steel Reduced-Shank Drill Bit, Bronze Finish, Round Shank with Flats, Spiral Flute, 135 Degree Split Point, 9/16″ Size - Designed for drilling tough, high-tensile strength materials. Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging. Cobalt steel provides extended tool life compared to high-speed steel drill bits when drilling hard materials. Reduced shank drill bit has a shank that is smaller in diameter than its shaft, permitting drilling with a 1/2″ drill chuck. Bronze finish lubricates the drill bit and provides wear resistance.

 

Huot 11985 12 Reduced Shank Drill Bit Stand for Sizes 12 to 1 in 164 Increments

Huot 11985 1/2″ Reduced Shank Drill Bit Stand for Sizes 1/2″ to 1″ in 1/64″ Increments

Huot 11985 1/2″ Reduced Shank Drill Bit Stand for Sizes 1/2″ to 1″ in 1/64″ Increments - The holes are labeled for quick identification. )cutting tool organizers provide storage, organization, and quick size identification for drill bits, taps, and reamers. The stand is 2. (H is height, the vertical distance from lowest to highest point w is width, the horizontal distance from left to right d is depth, the horizontal distance from front to back. The company, founded in 1926 and headquartered in st. Organizer types include gauges, indexes (also called cases), dispenser cabinets, carts, towers, racks, and platforms. Huot manufactures cutting tool storage systems. Drill bits are not included. 75 x 13 × 5 inches (h x w x d). The stand is made of steel with an epoxy finish for durability and protection. Paul, mn, meets international organization for standardization (iso) standard 9001. The huot drill bit stand holds 1/2″ reduced shank, also called silver and deming, drill bits in fractional sizes 1/2″ to 1″ in 1/64″ increments and is made in usa.

 

Qualtech 3364 HSS Reduced Shank Drill Bit 38 Shank DWDRSD38X3364

Qualtech 33/64 HSS Reduced Shank Drill Bit, 3/8 Shank, DWDRSD3/8X33/64

Qualtech 33/64 HSS Reduced Shank Drill Bit, 3/8 Shank, DWDRSD3/8X33/64 - Size 33/64. Dec equivalent 5156. Overall length 6. Flute length 3. Surface treated flutes, hss reduced shank silver and deming drill bit.

 

Precision Twist R56CO Cobalt Steel Reduced Shank Drill Bit Black and Bronze Oxide Finish 12 Reduced Shank 118 Degree Split Point 2332

Precision Twist R56CO Cobalt Steel Reduced Shank Drill Bit, Black and Bronze Oxide Finish, 1/2″ Reduced Shank, 118 Degree Split Point, 23/32″

Precision Twist R56CO Cobalt Steel Reduced Shank Drill Bit, Black and Bronze Oxide Finish, 1/2″ Reduced Shank, 118 Degree Split Point, 23/32″ - 118-degree split-point angles, for general drilling applications. Half-inch round shank allows larger sized drills to fit into small size chucks. High-speed steel (hss) containing cobalt is a good combination of toughness and hardness, for use on drilling through hard substances. Jobber-length drill bits, most common length drill bit, suitable for a wide range of applications. Combination black oxide and gold finish, improves lubricity, resists corrosion, and will not chip or flake off.

 

Viking Drill and Tool 29900 Type 280-UB Magnum Super Premium 12 Reduced Shank Drill Bit 1-18

Viking Drill and Tool 29900 Type 280-UB Magnum Super Premium 1/2″ Reduced Shank Drill Bit, 1-1/8″

Viking Drill and Tool 29900 Type 280-UB Magnum Super Premium 1/2″ Reduced Shank Drill Bit, 1-1/8″ - Special hi-molybdenum tool steel. Precision ground point, flutes, body, clearance and drill diameter for ultimate accuracy and performance. Premium 1/2-inch reduced shank heavy duty 135-degree split point 3-flats on shank. 1/2-inch shank, 6-inch oal. 135-degree split point for accurate centering and fast penetration.

 

uxcell 14mm Diameter Cutting Dia 12 inches Reduced Shank HSS Twist Drill Bit

uxcell 14mm Diameter Cutting Dia 1/2 inches Reduced Shank HSS Twist Drill Bit

uxcell 14mm Diameter Cutting Dia 1/2 inches Reduced Shank HSS Twist Drill Bit - Cutting diameter 14mm / 055″(9/16″)shank diameter 127mm/1/2″. Shank size 54 x 127mm / 213″ x 050″(ld)flute length 76mm / 299″. Weight 135gpackage content 1 x 1/2″ reduced shank drill bit. Total length 153mm / 60″color silver tone. Product name twist drill bitmaterial hss.

 

XtremepowerUS 8-Piece Reduced Shank Drill Bit Set High Speed Steel HSS Silver Deming 916 To 1 Black Storage Case

XtremepowerUS 8-Piece Reduced Shank Drill Bit Set High Speed Steel (HSS) Silver & Deming 9/16″ To 1″ Black, Storage Case

XtremepowerUS 8-Piece Reduced Shank Drill Bit Set High Speed Steel (HSS) Silver & Deming 9/16″ To 1″ Black, Storage Case - Premium high-speed steel construction for proven capability & durability to drill holes in plastic, aluminum, copper, stainless steel and many other types of materials. Fast and efficient drilling, the 135 degree split point tip and twist design helps with cutting speed while providing easy self centering without walking the twist design also allows chips and particles to quickly clear out. Coating for maximum protection, bits are coated with an extra layer of black enamel for durability that is able to withstand heavy duty applications without wear and tear. High-speed steel construction, bits are made from high quality high speed steel to ensure long lasting durability through many uses. Set includes 8-popular sizes and comes in a heavy duty aluminum organizing case for secure storage and easy carrying 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16 and 1-inch.

 

MaxTool 2332 Silver and Deming Drill Bit Prentice High Speed Steel M2 118 DEG POINT 6 OAL 12 Reduced Shank Black Oxide SD02B00R046

MaxTool 23/32″ Silver and Deming Drill Bit (Prentice); High Speed Steel M2; 118 DEG POINT; 6″ OAL 1/2″ Reduced Shank Black Oxide; SD02B00R046

MaxTool 23/32″ Silver and Deming Drill Bit (Prentice); High Speed Steel M2; 118 DEG POINT; 6″ OAL 1/2″ Reduced Shank Black Oxide; SD02B00R046 - Premium heat treated black oxide is durable and withstand heavy duty operation for a long tool life. Quality hss m2 ensures sharp and fast execution in any material for clean results. Black oxide surface treatment holds up lubricant better for smoother drilling. Precision ground with geometry of 118 degree chisel for quick penetration and an accurate start. 6″ oal & 1/2″ str shank fits 1/2″ drill chuck milled & polished flutes ensure chips move smoothly.

 

MaxTool 4764 Silver and Deming Drill Bit Prentice High Speed Steel M2 118 DEG POINT 6 OAL 12 Reduced Shank Black Oxide SD02B00R047

MaxTool 47/64″ Silver and Deming Drill Bit (Prentice); High Speed Steel M2; 118 DEG POINT; 6″ OAL 1/2″ Reduced Shank Black Oxide; SD02B00R047

MaxTool 47/64″ Silver and Deming Drill Bit (Prentice); High Speed Steel M2; 118 DEG POINT; 6″ OAL 1/2″ Reduced Shank Black Oxide; SD02B00R047 - Precision ground with geometry of 118 degree chisel for quick penetration and an accurate start. 6″ oal & 1/2″ str shank fits 1/2″ drill chuck milled & polished flutes ensure chips move smoothly. Quality hss m2 ensures sharp and fast execution in any material for clean results. Black oxide surface treatment holds up lubricant better for smoother drilling. Premium heat treated black oxide is durable and withstand heavy duty operation for a long tool life.

 

XMHF 40mm Black Oxide High Speed Steel Reduced Shank Drill Bit

XMHF 40mm Black Oxide High Speed Steel Reduced Shank Drill Bit

XMHF 40mm Black Oxide High Speed Steel Reduced Shank Drill Bit - Item diameter 40mm / 157inch ,length 150mm / 59inch ,material high-speed steel. Cutting direction right-hand cutting length 90mm /35inch. Cutting angle 118 degrees cutting diameter 40mm / 157inch. Shank diameter 12mm / 05inch ,shank type round. Item weight 635g ,package content 1 x hss drill bit.

 

Chicago Latrobe 190C-TN Cobalt Steel Reduced-Shank Drill Bit TiN Coated Round Shank 118 Degree Split Point 34 Size

Chicago Latrobe 190C-TN Cobalt Steel Reduced-Shank Drill Bit, TiN Coated, Round Shank, 118 Degree Split Point, 3/4″ Size

Chicago Latrobe 190C-TN Cobalt Steel Reduced-Shank Drill Bit, TiN Coated, Round Shank, 118 Degree Split Point, 3/4″ Size - Made in the usa. Titanium nitride (tin) coating adds lubricity and hardness, enhancing chip flow, finish hole quality, and drill life. Larger size general-purpose drills with 1/2″ reduced shank. Standardized lengths result in minimal adjustment during tool changes in screw machines and machining centers and increased rigidity is ideal for portable drilling. Features 6″ overall length and 3 1/8″ flute length for increased rigidity, less deflection, and better hole accuracy. Manufactured from cobalt premium highspeed steel for use in highly abrasive applications also 118 degree split point for easier, more precise penetration.

 

Drill America 1116 High Speed Steel Reduced Shank Drill Bit with 38 Shank DWDRSD Series

Drill America 11/16″ High Speed Steel Reduced Shank Drill Bit with 3/8″ Shank, DWDRSD Series

Drill America 11/16″ High Speed Steel Reduced Shank Drill Bit with 3/8″ Shank, DWDRSD Series - High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Ideal for drilling in low and medium tensile strength materials.

 

Chicago Latrobe 190 Series High-Speed Steel Reduced Shank Drill Bit Set With Metal Case Black Oxide Finish 118 Degree Conventional Point Round Shank Inch 8-piece 916 - 1 in 116 increments

Chicago Latrobe 190 Series High-Speed Steel Reduced Shank Drill Bit Set With Metal Case, Black Oxide Finish, 118 Degree Conventional Point, Round Shank, Inch, 8-piece, 9/16″ – 1″ in 1/16″ increments

Chicago Latrobe 190 Series High-Speed Steel Reduced Shank Drill Bit Set With Metal Case, Black Oxide Finish, 118 Degree Conventional Point, Round Shank, Inch, 8-piece, 9/16″ – 1″ in 1/16″ increments - Set of 8 reduced shank drill bits includes inch sizes 9/16″ through 1″ in 1/16″ increments. Made in the usa. Standardized shank enables drills with a 1/2″ chuck to drill large-diameter holes. High-speed steel (hss) provides hardness for wear resistance. Black oxide finish reduces bit wear while promoting chip and coolant flow on ferrous material. 118-degree conventional point for a range of drilling applications.

 

uxcell Reduced Shank Twist Drill Bits 185mm High Speed Steel 4341 with 10mm Shank 1 Pcs

uxcell Reduced Shank Twist Drill Bits 18.5mm High Speed Steel 4341 with 10mm Shank 1 Pcs

uxcell Reduced Shank Twist Drill Bits 18.5mm High Speed Steel 4341 with 10mm Shank 1 Pcs - Black & gold oxide finish premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant. Features cutting edge diameter 185mm / 073″ shank diameter 10mm / 039″ effective cutting edge length 57mm / 224″ total length 150mm / 60″. Versatile uses for use in a wide range of stainless steel, aluminum alloy, iron, copper, brass and metal materials. High speed steel tool high-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Reduced shank reduced shank drill expands the size range capacity of a portable drill chuck common flute and overall length for minimal adjustment during tool changes.

 

MaxTool 1-116 Silver and Deming Drill Bit Prentice High Speed Steel M2 135 DEG Split Point 6 OAL 12 Reduced Shank Black Oxide SD02B00R104

MaxTool 1-1/16″ Silver and Deming Drill Bit (Prentice); High Speed Steel M2; 135 DEG Split Point; 6″ OAL 1/2″ Reduced Shank Black Oxide; SD02B00R104

MaxTool 1-1/16″ Silver and Deming Drill Bit (Prentice); High Speed Steel M2; 135 DEG Split Point; 6″ OAL 1/2″ Reduced Shank Black Oxide; SD02B00R104 - Black oxide surface treatment holds up lubricant better for smoother drilling. Quality hss m2 ensures sharp and fast execution in any material for clean results. 6″ oal & 1/2″ str shank fits 1/2″ drill chuck milled & polished flutes ensure chips move smoothly. Precision ground with geometry of 118 degree chisel for quick penetration and an accurate start. Premium heat treated black oxide is durable and withstand heavy duty operation for a long tool life.

 

Irwin 4964 Silver  Deming High Speed Steel Fractional 12 Reduced Shank Drill Bits

Irwin 49/64″ Silver & Deming High Speed Steel Fractional 1/2″ Reduced Shank Drill Bits

Irwin 49/64″ Silver & Deming High Speed Steel Fractional 1/2″ Reduced Shank Drill Bits - High speed steel tool high-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Black & gold oxide finish premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant. Han 91149 49/64 (ahn-91149). Reduced shank reduced shank drill expands the size range capacity of a portable drill chuck common flute and overall length for minimal adjustment during tool changes. Versatile uses for use in a wide range of stainless steel, aluminum alloy, iron, copper, brass and metal materials.

 

Chicago Latrobe 190C Cobalt Steel Reduced Shank Drill Bit Gold Oxide Finish Round Shank 118 Degree Split Point 58 Size

Chicago Latrobe 190C Cobalt Steel Reduced Shank Drill Bit, Gold Oxide Finish, Round Shank, 118 Degree Split Point, 5/8″ Size

Chicago Latrobe 190C Cobalt Steel Reduced Shank Drill Bit, Gold Oxide Finish, Round Shank, 118 Degree Split Point, 5/8″ Size - Manufactured from cobalt premium highspeed steel for use in highly abrasive applications. Standardized lengths result in minimal adjustment during tool changes in screw machines and machining centers. 118 degree split point for easier, more precise penetration. Larger size general-purpose drills with 1/2″ reduced shank. Made in the usa. Increased rigidity is ideal for portable drilling.

 

Chicago Latrobe 190F High-Speed Steel Reduced Shank Drill Bit Black Oxide Finish Flatted Shank 118 Degree Conventional Point 1-14 Size

Chicago Latrobe 190F High-Speed Steel Reduced Shank Drill Bit, Black Oxide Finish, Flatted Shank, 118 Degree Conventional Point, 1-1/4″ Size

Chicago Latrobe 190F High-Speed Steel Reduced Shank Drill Bit, Black Oxide Finish, Flatted Shank, 118 Degree Conventional Point, 1-1/4″ Size - Increased rigidity is ideal for portable drilling. Black oxide finish for increased wear resistance and added lubricity standard from stock. Standardized lengths result in minimal adjustment during tool changes in screw machines and machining centers. Features 6″ overall length and 3 1/8″ flute length for increased rigidity, less deflection, and better hole accuracy. Larger size general-purpose drills with 1/2″ reduced shank. Made in the usa.

 

Michigan Drill 303C Series Cobalt Steel Reduced Shank Drill Bit Round Shank Spiral Flute 135 Degrees Notched Point 3564 Size Pack of 1

Michigan Drill 303C Series Cobalt Steel Reduced Shank Drill Bit, Round Shank, Spiral Flute, 135 Degrees Notched Point, 35/64″ Size (Pack of 1)

Michigan Drill 303C Series Cobalt Steel Reduced Shank Drill Bit, Round Shank, Spiral Flute, 135 Degrees Notched Point, 35/64″ Size (Pack of 1) - Heavy web 8 percent cobalt content permits use at higher speeds in hardened stainless heat treated and high temperature alloys. 1/2-inches standard shank diameter. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.

 

Drill America 1116 Reduced Shank High Speed Steel Black Gold KFD Drill Bit with 12 Shank KFD Series

Drill America 11/16″ Reduced Shank High Speed Steel Black & Gold KFD Drill Bit with 1/2″ Shank, KFD Series

Drill America 11/16″ Reduced Shank High Speed Steel Black & Gold KFD Drill Bit with 1/2″ Shank, KFD Series - Gold and black surface treated for use in stainless steel and other hard metal drilling. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Heavy duty 135 degree split point. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Round shanks allow use with a wide variety of tool holding systems.

 

Michigan Drill 303C Series Cobalt Steel Reduced Shank Drill Bit Round Shank Spiral Flute 135 Degrees Notched Point 58 Size Pack of 1

Michigan Drill 303C Series Cobalt Steel Reduced Shank Drill Bit, Round Shank, Spiral Flute, 135 Degrees Notched Point, 5/8″ Size (Pack of 1)

Michigan Drill 303C Series Cobalt Steel Reduced Shank Drill Bit, Round Shank, Spiral Flute, 135 Degrees Notched Point, 5/8″ Size (Pack of 1) - Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Heavy web 8 percent cobalt content permits use at higher speeds in hardened stainless heat treated and high temperature alloys. 1/2-inches standard shank diameter.

 

Michigan Drill 303C Series Cobalt Steel Reduced Shank Drill Bit Round Shank Spiral Flute 135 Degrees Notched Point 1732 Size Pack of 1

Michigan Drill 303C Series Cobalt Steel Reduced Shank Drill Bit, Round Shank, Spiral Flute, 135 Degrees Notched Point, 17/32″ Size (Pack of 1)

Michigan Drill 303C Series Cobalt Steel Reduced Shank Drill Bit, Round Shank, Spiral Flute, 135 Degrees Notched Point, 17/32″ Size (Pack of 1) - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 1/2-inches standard shank diameter. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Heavy web 8 percent cobalt content permits use at higher speeds in hardened stainless heat treated and high temperature alloys. Round shanks allow use with a wide variety of toolholding systems.

 

XMHF 16mm High Speed Steel 12 Reduced Shank Drill Bit Black Oxide Finish

XMHF 16mm High Speed Steel 1/2″ Reduced Shank Drill Bit Black Oxide Finish

XMHF 16mm High Speed Steel 1/2″ Reduced Shank Drill Bit Black Oxide Finish - Widely applicable 16mm hss 1/2 reduced shank drill designed for a broad range of materials in the steel and iron suitable for production, maintenance or portable drilling operations. Powerful cutting ability this high speed steel drill are suitable for most general-purpose applications and have abrasion resistance and toughness. Precision manufacturing precise grinding to achieve a high degree of concentricity between the handle and the body diameter. Efficient sharp and twisted flute will make drilling easier and more efficient. Black oxide surface treated with a wear-resistant black oxide that increases lubricity.

 

Drillco 1000E Series High-Speed Steel Reduced-Shank Drill Bit Uncoated BrightBlack Oxide Finish Round Shank with Flats Spiral Flute 118 Degree Conventional Point 2332 Size

Drillco 1000E Series High-Speed Steel Reduced-Shank Drill Bit, Uncoated (Bright)/Black Oxide Finish, Round Shank with Flats, Spiral Flute, 118 Degree Conventional Point, 23/32″ Size

Drillco 1000E Series High-Speed Steel Reduced-Shank Drill Bit, Uncoated (Bright)/Black Oxide Finish, Round Shank with Flats, Spiral Flute, 118 Degree Conventional Point, 23/32″ Size - Reduced shank drill bit has a shank that is smaller in diameter than its shaft, permitting drilling with a 1/2″ drill chuck. 118-degree conventional point for general-purpose drilling applications. Designed for drilling low- and medium-tensile strength materials. High-speed steel (hss) provides hardness for wear resistance. Black oxide finish on the flutes reduces wear while promoting chip and coolant flow.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.