Steel Thread Rolling Screw for Plastic, Zinc Plated, Pan Head, Phillips Drive, #2-28 Thread Size, 5/16″ Length (Pack of 100)
- Pan head has a flat top and short vertical sides with a rounded top edge. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Thread rolling screw recommended for use in plastic. Zinc plating resists corrosion and has a reflective appearance. Steel is often used in applications where strength is the primary consideration.
Steel Pan Head Machine Screw, Black Oxide Finish, Meets DIN 7985, #3 Phillips Drive, M6-1 Thread Size, 20 mm Length, Fully Threaded, Import (Pack of 50)
- Steel is often used in applications where strength is the primary consideration. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Zinc plating resists corrosion and has a reflective appearance. Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic.
Steel Thread Rolling Screw for Plastic, Black Oxide Finish, Pan Head, Phillips Drive, #8-16 Thread Size, 3/8″ Length (Pack of 100)
- Steel is often used in applications where strength is the primary consideration. Thread rolling screw recommended for use in plastic. Black oxide finish offers mild corrosion resistance and lubricity. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Pan head has a flat top and short vertical sides with a rounded top edge.
Nylon 6/6 Hex Nut, Black, M3-0.5 Thread Size, 5.5 mm Width Across Flats, 2.4 mm Thick (Pack of 100)
- Nylon 6/6 provides resistance to abrasion, corrosion, and many chemicals and solvents. Others, such as eye nuts, thumb nuts, and wing nuts, can be tightened by hand. Nuts are internally threaded fasteners that are used with bolts and threaded rods and studs to connect components. Nylon 6/6 can either absorb or lose moisture, which may alter its dimensions and mechanical properties. The nylon 6/6 hex nut has a black color. Some nuts have a self-locking mechanism, such as a nylon patch or distorted threads, that makes them suitable for applications with a high amount of vibration. It has six flat sides that a wrench can grip to turn from the side, enabling use when there is no space above the nut. Several different nut styles fit a variety of application and installation requirements. Some styles, such as hex nuts, acorn nuts, flange nuts, and coupling nuts, must be tightened with a tool. The material is a strong yet lightweight plastic and is nonconductive.
Walter Enduro-Flex Turbo Abrasive Flap Disc, Type 29, 5/8″-11 Thread Size, Plastic Backing, Ceramic, 4-1/2″ Diameter, Grit 36/60 (Pack of 10)
- Safe to use on all metals, including stainless steel, aluminum and other sensitive alloys. Aggressive grinding thanks to cyclone technology (exclusive abrasive grain blend). Runs cool due to turbofan backing pad design. Great for stock removal, edge breaking and blending applications. Long life and high overall material removal.
18-8 Stainless Steel Thread Rolling Screw for Plastic, Passivated Finish, Pan Head, Star Drive, #8-16 Thread Size, 3/8″ Length (Pack of 25)
- Pan head has a flat top and short vertical sides with a rounded top edge. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive. 18-8 stainless steel provides good corrosion resistance and strength. Thread rolling screw recommended for use in plastic. Passivated finish enhances the natural corrosion resistance of stainless steel.
Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #1 Phillips Drive, #4-40 Thread Size, 3/4″ Length, Fully Threaded, Import (Pack of 100)
- Hex socket drive has a hexagonal slot that turns using an allen key driver. Designed with unthreaded grip length to fit the thickness of material being fastened and protect it from thread damage. 18-8 stainless steel provides good corrosion resistance and strength, while the plain surface has no finish or coating. Flange socket cap head is round with a flat top and high profile that provides high strength and has a flange that acts as a washer for use with thin or soft materials. Made in usa.
Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #3 Phillips Drive, #12-24 Thread Size, 1/2″ Length, Fully Threaded, Import (Pack of 100)
- Zinc plating resists corrosion and has a reflective appearance. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface. Steel is often used in applications where strength is the primary consideration.
Steel Sheet Metal Screw, Black Oxide Finish, Truss Head, Phillips Drive, Type A, #6-18 Thread Size, 3/4″ Length (Pack of 100)
- Truss head has an extra-wide low-profile domed shape for applications with minimal clearance. Steel is often used in applications where strength is the primary consideration, and the black oxide finish offers mild corrosion resistance and lubricity. Type a point has a conical tip and spaced threads that are suitable for forming threads in holes drilled in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.
Steel Thread Cutting Screw, Zinc Plated Finish, Hex Washer Head, Slotted Drive, Type F, 5/16″-18 Thread Size, 1″ Length (Pack of 25)
- Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Hex washer head has a flange for additional grip with the mating surface. Steel is often used in applications where strength is the primary consideration. Zinc plating resists corrosion and has a reflective appearance. Slotted drive has a linear slot for use with a flat-blade driver.
Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #1 Phillips Drive, #4-40 Thread Size, 1/4″ Length, Fully Threaded, Import (Pack of 100)
- Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Pan head has a flat top and short vertical sides with a rounded top edge. Steel is often used in applications where strength is the primary consideration, and the black oxide finish offers mild corrosion resistance and lubricity.
Steel Sheet Metal Screw, Black Zinc Plated Finish, Pan Head, Phillips Drive, Type AB, #6-20 Thread Size, 1/4″ Length (Pack of 100)
- Pan head has a flat top and short vertical sides with a rounded top edge. Steel is often used in applications where strength is the primary consideration, and the zinc plating resists corrosion and has a black reflective appearance. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood.
410 Stainless Steel Thread Rolling Screw for Plastic, Passivated Finish, Pan Head, Phillips Drive, #4-20 Thread Size, 1/2″ Length (Pack of 50)
- Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. 410 stainless steel has high strength and hardness, and resists corrosion in mild environments. Pan head has a flat top and short vertical sides with a rounded top edge. Passivated finish enhances the natural corrosion resistance of stainless steel. Thread rolling screw recommended for use in plastic.
18-8 Stainless Steel Prairie Bolt, Plain Finish, Flange Socket Cap Head, Hex Socket Drive, #10-32 Thread Size, 0.190″ Shoulder Diameter, 1″ Grip Length, Made in US (Pack of 1)
- 18-8 stainless steel provides good corrosion resistance and strength, while the plain surface has no finish or coating. Flange socket cap head is round with a flat top and high profile that provides high strength and has a flange that acts as a washer for use with thin or soft materials. Made in usa. Designed with unthreaded grip length to fit the thickness of material being fastened and protect it from thread damage. Hex socket drive has a hexagonal slot that turns using an allen key driver.
Keeney K835-12 3-Inch Toilet Flush Valve Fits Toto, Gerber, Mansfield, Crane, Jacuzzi or Any Flush Valve with Similar Thread Size, White, Green
- 3-inch toilet flush valve. Fits toto, gerber, mansfield, crane, jacuzzi toilets or any flush valve with similar thread size. Adjustable water saving flapper. Includes all nuts and washers. Adjustable no cut overflow tube.
Steel Pan Head Machine Screw, Black Oxide Finish, Meets DIN 7985, #2 Phillips Drive, M4-0.7 Thread Size, 12 mm Length, Fully Threaded, Import (Pack of 100)
- Steel is often used in applications where strength is the primary consideration. Zinc plating resists corrosion and has a reflective appearance. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive. Wafer head has a flat top, a 70-degree cone-shaped bearing surface, and a small slope between the top and the bearing surface.
Nylon 6/6 Hex Nut, Black, 1/4″-20 Thread Size, 7/16″ Width Across Flats, 15/64″ Thick (Pack of 100)
- Nuts are internally threaded fasteners that are used with bolts and threaded rods and studs to connect components. Nylon 6/6 can either absorb or lose moisture, which may alter its dimensions and mechanical properties. The nylon 6/6 hex nut has a black color. It has six flat sides that a wrench can grip to turn from the side, enabling use when there is no space above the nut. Some styles, such as hex nuts, acorn nuts, flange nuts, and coupling nuts, must be tightened with a tool. The material is a strong yet lightweight plastic and is nonconductive. Others, such as eye nuts, thumb nuts, and wing nuts, can be tightened by hand. Several different nut styles fit a variety of application and installation requirements. Some nuts have a self-locking mechanism, such as a nylon patch or distorted threads, that makes them suitable for applications with a high amount of vibration. Nylon 6/6 provides resistance to abrasion, corrosion, and many chemicals and solvents.
Steel Sheet Metal Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type AB, #4-24 Thread Size, 3/8″ Length (Pack of 100)
- Pan head has a flat top and short vertical sides with a rounded top edge. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Steel is often used in applications where strength is the primary consideration, and the black oxide finish offers mild corrosion resistance and lubricity.
Steel Self-Drilling Screw, Zinc Plated Finish, Wafer Head, Star Drive, #3 Drill Point, #10-16 Thread Size, 1-1/4″ Length (Pack of 50)
- Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive. Steel is often used in applications where strength is the primary consideration. Wafer head has a flat top, a 70-degree cone-shaped bearing surface, and a small slope between the top and the bearing surface. Zinc plating resists corrosion and has a reflective appearance.
Steel Sheet Metal Screw, Zinc Plated, Hex Washer Head, Slotted Drive, Type AB, #6-20 Thread Size, 1/2″ Length (Pack of 100)
- Hex washer head has six flat sides that a wrench can grip from the side in low-profile applications and has a flange for additional bearing surface to distribute the force over the material being fastened. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Steel is often used in applications where strength is the primary consideration, and the zinc plating resists corrosion and has a reflective appearance. Slotted drive has a linear slot for use with a flat-blade driver.
Steel Self-Drilling Screw, Zinc Plated Finish, Pan Head, Star Drive, #2 Drill Point, #6-20 Thread Size, 3/4″ Length (Pack of 100)
- Steel is often used in applications where strength is the primary consideration. Pan head has a flat top and short vertical sides with a rounded top edge. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive. Zinc plating resists corrosion and has a reflective appearance.
Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #1 Phillips Drive, #4-40 Thread Size, 3/8″ Length, Fully Threaded, Import (Pack of 100)
- Zinc plating resists corrosion and has a reflective appearance. Hex washer head has a flange for additional grip with the mating surface. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Steel is often used in applications where strength is the primary consideration. Slotted drive has a linear slot for use with a flat-blade driver.
Steel Sheet Metal Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type A, #10-12 Thread Size, 1/2″ Length (Pack of 100)
- Type a point has a conical tip and spaced threads that are suitable for forming threads in holes drilled in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Steel is often used in applications where strength is the primary consideration, and the black oxide finish offers mild corrosion resistance and lubricity. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Pan head has a flat top and short vertical sides with a rounded top edge.
Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #1 Phillips Drive, #2-56 Thread Size, 3/8″ Length, Fully Threaded, Import (Pack of 100)
- Modified truss head is extra wide with a low-profile dome and integral round washer. Steel is often used in applications where strength is the primary consideration. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Zinc plating resists corrosion and has a reflective appearance.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
