DELUXE ROUTER TABLE FENCE KIT by Peachtree Woodworking – PW1072
- (1) fence stop block, (6) 1/4″ x 20 knob and bolts, (1) pair mini t-track for fence mounting. The dust port system allows you to attach a 2-1/2″ shop-vac hose directly to the back of the fence. (1) pair dust port mounting blocks, (1) router dust port (1) small plastic featherboard. Kit includes (1) 32″ pre-drilled aluminum fence, (1) pair mdf 16″ fence sections. Fence will accommodate bits up to 3-1/2″ in diameter.
32″ Deluxe Router Table Fence by Peachtree Woodworking PW3319
- Tall adjustment knobs allow easy access for moving your fence forward and backward. Built in t-track. 2 mdf fence plates supported by solid aluminum “l” fence. System equipped with a dust port the envelopes the opening between the 2 mdf fence sections. Accommodates router bits up to 3 1/2″ in diameter.
Pro Phenolic Router Table, Fence, Stand, & FX Router Lift
- Our brand-new pro tables feature one-piece 3/4″ solid phenolic construction for an ultra-flat, low-friction surface that won’t warp, dent, scratch or delaminate, and the whiter, brighter finish enhances visibility. 24″ x 32″ table. Included aluminum pro fence features two adjustable white melamine mdf faces, front- and rear-facing accessory t-tracks and an included dust port and bit guard. The router lift fx accepts the following routers porter-cable 690/890 series, bosch 1617-16-18, dewalt 610, 616, 618. 24″ x 32″ table for over five square feet of surface area. Router lift fx includes insert ring with 1-1/2″ opening. 10-point plate leveling/locking system. D. Aluminum fence backer features front- and rear-mounted universal t-tracks that accept 5/16″ t-bolts, 1/4″ t-bolts, and 1/4″ hex bolts. 3/4″ t-profile miter slot allows you to use precision aftermarket miter gauges, while universal t-tracks in both the fence and table accept stops, hold-downs and more. Includes rockler pro fence with extruded aluminum backer for straight, accurate cuts. Includes new, larger steel stand, which measures 18″d x 24″w x 32″h. Includes bit safety guard for safe routing. D. 8-1/4″ x 11-3/4″ x 1/4″ aluminum plate. Fence features a 2-1/2″ o. (2-1/4″ i. ) Dust port. These packages include our steel stand and the acclaimed router lift fx for effortless above-table adjustments and bit changes. Large opening in fence for big router bits. Featuring 8-points of plate leveling and 2 locking points. Ergonomic t-knobs for easy fence adjustment. Includes our acclaimed rockler router lift fx for above-table bit height adjustments and bit changes.
24″ Deluxe Router Table Fence by Peachtree Woodworking PW3318
- Tall adjustment knobs allow easy access for moving your fence forward and backward. System equipped with a dust port the envelopes the opening between the 2 mdf fence sections. Built in t-track. 2 mdf fence plates supported by solid aluminum “l” fence. Accommodates router bits up to 3 1/2″ in diameter.
Rockler Pro Phenolic Router Table, Fence, & FX Router Lift
- 3/4″ t-profile miter slot allows you to use precision aftermarket miter gauges, while universal t-tracks in both the fence and table accept stops, hold-downs and more. Fence features a 2-1/2″ o. 24″ x 32″ table for over five square feet of surface area. ) Dust port. Includes bit safety guard for safe routing. Large opening in fence for big router bits. D. Router lift fx includes insert ring with 1-1/2″ opening. Our brand-new pro tables feature one-piece 3/4″ solid phenolic construction for an ultra-flat, low-friction surface that won’t warp, dent, scratch or delaminate. Aluminum fence backer features front- and rear-mounted universal t-tracks that accept 5/16″ t-bolts, 1/4″ t-bolts, and 1/4″ hex bolts. Ergonomic t-knobs for easy fence adjustment. Included aluminum pro fence features two adjustable white melamine mdf faces, front- and rear-facing accessory t-tracks and an included dust port and bit guard. Includes our acclaimed rockler router lift fx for above-table bit height adjustments and bit changes. Featuring 8-points of plate leveling and 2 locking points. The router lift fx accepts the following routers porter-cable 690/890 series, bosch 1617-16-18, dewalt 610, 616, 618. The whiter, brighter finish enhances visibility, while the included router lift fx allows effortless above-table adjustments and bit changes. (2-1/4″ i. Includes rockler pro fence with extruded aluminum backer for straight, accurate cuts. D.
Milescraft 1406 FeatherBoard for Router Tables, Table Saws and Fences
- Split rail miter bar construction-provides maximum hold. Ergonomic knobs help prevent over-tightening and provides non-slip loosening. This innovative featherboard design provides consistent tension and maximum holding pressure created by unique split rail construction. All mounting hardware included for nearly any operation 3/4 and 5/8-inch wide miter bars and t-slot bolts for applications on most standard table saws, router tables, and fences. Dual slide motion-side to side and forward action for quick and easy setup. Unique pre-load tension design-quickly set tension for consistent cuts while reducing the chance of kick-back. 5/8″ and 3/4″ metal miter bars fit all standard miter slots. Pre-load tension design maintains consistent pressure across face of the featherboard.
FeatherBoard Milescraft 1406 for Router Tables, Table Saws and Fences
- Ergonomic knobs help prevent over-tightening and provides non-slip loosening. All mounting hardware included for nearly any operation 3/4 and 5/8-inch wide miter bars and t-slot bolts for applications on most standard table saws, router tables, and fences. Split rail miter bar construction-provides maximum hold. Dual slide motion-side to side and forward action for quick and easy setup. Unique pre-load tension design-quickly set tension for consistent cuts while reducing the chance of kick-back.
Kreg KMS7215 Micro-Adjuster for Band Saw and Router Table Fences
- Black plastic fixing knob. Allows you to dial-in precise adjustments easily with one hand. Time-saving and accurate saw fence micro-adjuster. The micro-adjuster is backed by a manufacturer’s limited 30-day warranty. It features a ribbed dial, which is easy to grip with just one hand or thumb, and a black plastic fixing knob to easily lock the adjustment. The kreg micro-adjuster for band saw fences allows you to dial-in precise adjustments easily with one hand. Easy-to-grip ribbed dial. Manufacturer’s limited 30-day warranty.
Kreg KMS7215 Micro-Adjuster for Band Saw and Router Table Fences by Kreg
- Kreg kms7215 micro-adjuster for band saw and router table fences. Remote crank handle with dedicated cam-lock mechanism to prevent spindle rotation. Extruded aluminum 3/4″ miter track with accessory t-slot, 4″ dust port. Unique router clamping system fits most fixed-base router motors. Optional digital readout attachment not included.
Kreg PRS1010 36-inch Precision Router Table Fence
- Highlights innovative self-squaring t-square style design mounts to tables between 3/4″ and 1-1/2″ thick fully enclosed aluminum extrusion and full length vacuum chamber for a cleaner shop fully independent fence faces for use as a vertical jointer.
Router Table & Table Saw Anti-Kickback Fence Feeder Safety Roller System
- Mounts directly to router table fence with standard 1/4″ x 20 hex head bolts not included. Router table & table saw anti-kickback fence feeder safety roller system#0035/17. Vertically adjustable for the router bit height. Allows you to see the router bit and work piece while you make your cut. Measures 5-3/4″w x 3-1/2″h x 2″d.
M&N Multi-purpose Double Featherboards Feather Loc Board for Table Saws Router & Tables Fences Tools Miter Gauge Slot Woodwork DIY
- The featherboard are made from a high-tech polymer and each one has 13 angled fingers that apply steady pressure that consistently produces cleaner cuts with less chance of kickback, chattering or lifting. The featherboard slide into miter-gauge slots in the router table or fence, and are locked in place by tightening a pair of knobs. The result is a dramatic increase in the accuracy, quality and safety of the cuts. Usually the product will be sent in 2-5 working days and takes about 3–9 business days to reach you a featherboard is undoubtedly the most underrated router-table accessory of all time. This popular router-table accessory consists of not one, but two industrial-quality featherboards. When properly installed, its flexible fingers keep the workpiece pressed tightly against the router tabletop or router fence throughout the routing operation. Note that it can also be used on a table saw, shaper, bandsaw or any other woodworking machine with a miter gauge slot.
Kreg PRS1015 Router Table Fence
- Features a measuring scale that allows you to position the fence and make adjustments. The fence adjusts easily with just one hand, and locks firmly in place with dual locks. A large paddle lock on the infeed end, and a quarter-turn lock on the out feed end.
SUPREME ROUTER TABLE FENCE KIT By Peachtree Woodworking – PW1073
- Fence will accommodate bits up to 3-1/2″ in diameter. (1) pair dust port mounting blocks, (1) router dust port (1) small plastic featherboard. Kit includes (1) 32″ pre-drilled aluminum fence, (1) pair 16″ aluminum fence sections. The dust port system allows you to attach a 2-1/2″ shop-vac hose directly to the back of the fence. (1) uni-fence stop block, (6) 1/4″ x 20 knob and bolts.
Platte River 149078, Portable Power Tool Accessories, Routers & Trimmers, Router Table Fence With Dust Port
- Separate miter saw hardware kit does not include fence stock. T-slots add capacity to attach and adjust jigs and work stops. One-year parts and workmanship warranty. Usa. Woodtek-usaâ„¢ extruded aluminum fence stock is versatile and easy to install, torsion box extruded metal maintains a consistent, straight work surface. Profile includes t-slots that accept 1/4-20 hex head bolts and allow them to slide lengthwise. Ready-to-install fence kits save time and will increase the versatility of your tablesaw miter gauge, bandsaw or router table.
Eagle America 415-4502 X1 Router Table Fence
- Includes two 1/32″ x 1/16″ space bars. Made of melamine coated heavy-duty mdf and fully edge banded for low friction and long life. Dust port is designed to accept a 2-1/4″ or 2-1/2″ vacuum hose. Fence mounts to any table that is 1/2″ to 1‑1/2″ thick and from 24″ to 32″ wide.
KREG Precision Router Table Fence 36″
- Designed for use with either the jessem rout-r-fencetm or mast-r-fence ii. Machined from solid aluminum and anodized for durability. Quickly moves into position and locks in place for a positive stop. Not for use with the original jessem mast-r-fencetm. Anchors in the top t-track on jessem router table fences.
Kreg PRS1015 Router Table Fence by Kreg
- The fence adjusts easily with just one hand, and locks firmly in place with dual locksa large paddle lock on the infeed end, and a quarter-turn lock on the out feed endfeatures a measuring scale that allows you to position the fence and make adjustments.
Woodtek 165560, Portable Power Tool Accessories, Routers & Trimmers, Fence Ass’y For 27″ X 16″ Cast Iron Router Table
- Imported. Tool-free adjustment of fence faces. ) Includes molded dust port with 2-1/4″ id, 2-1/2″ od and 4″ adjustable bit guard. 0 lbs. (Purchased separately. Net weight 11. The woodtek® deluxe 27″ router table fence is designed to fit the woodtek® small, 27″ x 16″ cast iron table 165-557 and will also fit most any top 1/2″ to 1-1/2″ thick and 21-1/2″ to 27″ wide. Fence dimensions 3-5/8″ tall x 30-5/8″ long. Shipping weight 12. Fence is easily tightened with tall, above-the-fence knobs and glides smoothly in dual tracks scales on the dual tracks can be zero-referenced for repeatable set-ups. Finely machined from 6061 aluminum extrusion with top and front t-slots for anchoring accessories fence faces are constructed of pvc coated mdf and adjust tool free. . 1 lbs. Top fence scale allows for precise placement of stops, hold downs and other fixtures.
Right Angle Dust Port, Router Table Fence Dust Port
- This port allows you to screw right into our aluminum fence core or you can simply drill right into the plastic and mount it to your own custom fence. If you are building a router table fence, why not take a big shortcut and get a dust port with a 90 degree angle built in this saves you the time of using other dust ports and having to build a shroud or support system to mount it to.
KREG PRS1015 Precision Router Table Fence by Kreg
- Anodised aluminiummagnified measuring system offers outstanding accuracyincludes two rods to offer a built-in jointing systemcompatible with any router tablet-square style self-squaring carriage.
Kreg KMS7215 Micro-Adjuster for Band Saw and Router Table Fences, Model: KMS7215, Tools & Hardware store
- Manufacturer’s limited 30-day warranty. Allows you to dial-in precise adjustments easily with one hand. Time-saving and accurate saw fence micro-adjuster. Easy-to-grip ribbed dial. Black plastic fixing knob.
Milescraft 1406 FeatherBoard for Router Tables, Table Saws and Fences New
- Includes router table top with insert plate, router table fence and multi-purpose steel stand #148166 kreg 4pc casters set not included. Multi-purpose steel stand is adjustable from 31″ to 39″ in height. Milescraft 1406 featherboard for router tables, table saws and fences new#0035/12. 24″ x 32″ router table top includes a router insert plate with three molded level-loc reducing rings. 36″ t-square style router table fence features a micro-adjust wheel for precise setups.
Woodtek 165551, Portable Power Tool Accessories, Routers & Trimmers, Fence Ass’y For 32″ X 24″ Cast Iron Router Table
- ) Includes molded dust port with 2-1/4″ id, 2-1/2″ od and 4″ adjustable bit guard. 0 lbs. Tool-free adjustment of fence faces. Finely machined from 6061 aluminum extrusion with top and front t-slots for anchoring accessories fence faces are constructed of pvc coated mdf and adjust tool free. Fence dimensions 3-5/8″ tall x 36″ long. (Purchased separately. Fence is easily tightened with tall, above-the-fence knobs and glides smoothly in dual tracks scales on the dual tracks can be zero-referenced for repeatable set-ups. The woodtek® deluxe 32″ router table fence is designed to fit the woodtek® 32″ x 24″ cast iron table 165-548 and will also fit most any top 1/2″ to 1-1/2″ thick and 26-1/2″ to 32″ wide. Shipping weight 12. 1 lbs. Imported. Top fence scale allows for precise placement of stops, hold downs and other fixtures. Net weight 11.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
