Top 24 Best Carbide Tipped Router Bits

 

Magnate 1725 Bull Nose (Half Round) Carbide Tipped Router Bit – 3/4″ Bead Diameter - Excessive overall length may cause tool damage. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. It is suited for softwoods, hardwoods, chipboard, plywood and etc. For bead cutting and edge rounding on picture frames, stair threads, window sills, etc. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. You may try the following suggestion. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. It is also equipped with wide open gullets for easy disposal of wood chips. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. In case a bit doesn’t come with a speed chart. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity.

 

Amana Tool 47106 Flush Trim with Ball Bearing Guide 1/2-Inch Diameter by 1/2-Inch Cutting Height by 1/4-Inch Shank Carbide Tipped Router Bit - Excellent for template work. 1/2-inch cutting diameter. Carbide tipped, industrial quality. 1/4-inch shank, 2 flute. 1/2-inch cutting height, 2-1/4-inch length.

 

Amana Tool 49496 Corner Round 3/4-Inch Diameter by 3/8-Inch Cutting Height by 1/8-Inch Radius by 1/4-Inch Shank Carbide Tipped Router Bit - Amana 49496 specifications radius 1/8″ large diameter 3/4″ carbide height 3/8″ shank diameter 1/4″ overall length 2″ amana 49496 features the basic edge-forming bit, the corner-rounding bit rounds an edge to a given radius. If a smaller pilot bearing is used, a second shoulder can be produced, in effect making the bit a beading bit. . The tool is shouldered to cut a fillet. Also known as roundover, rounding over, and quarter-round. The cut can be used to ease edges, as a simple profile, or as a part of a complex one.

 

Amana Tool 45465 Flush Trim/Pattern Plunge 3/4-Inch Diameter by 1-3/4-Inch Cutting Height by 1/2-Inch Shank Carbide Tipped Router Bit - 3-3/4-inch length. 1-3/4-inch cutting height. Carbide tipped, industrial quality. 1/2-inch shank, 2 flute. 3/4-inch cutting diameter.

 

Magnate 5809 Edge Beading Carbide Tipped Router Bit – 3/16″ Bead Diameter; 1/4″ Shank Diameter - This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. It is also equipped with wide open gullets for easy disposal of wood chips. In case a bit doesn’t come with a speed chart. You may try the following suggestion. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Excessive overall length may cause tool damage. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is suited for softwoods, hardwoods, chipboard, plywood and etc.

 

Amana Tool 45481 Flush Trim/Pattern Plunge 1/2-Inch Diameter by 3/8-Inch Cutting Height by 1/4-Inch Shank Carbide Tipped Router Bit - 1/4-inch shank, 2 flute. 2-1/4-inch length. 1/2-inch cutting diameter. 3/8-inch cutting height. Carbide tipped, industrial quality.

 

Amana Tool 54302 Edge Fluting 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank - Carbide tipped, industrial quality. Profile radius 5/16-inch. 19/64-inch upper radius, 13/32-inch lower radius. 1/2-inch shank, 2-flute. 1/2-inch cutting height, 3/4-inch cutting diameter.

 

Amana Tool MR0108 Chamfer with Mini Ball Bearing Guide 9/16-Inch Diameter, 45-Degree Angle, 1/4-Inch Shank Carbide Tipped Router Bit - 1/4-inch shank, 2 flute. 45-degree angle, 9/16-inch cutting diameter. Carbide tipped, industrial quality. Amana tool exclusive chamfer miniature bit. 1/4-inch cutting height, 1-7/8-inch length.

 

Amana Tool 47114 Flush Trim with Ball Bearing Guide 1/2 by 1 by 1/4-inch Shank 3 Flute Carbide Tipped Router Bit - 1/4-inch shank, 3 flute. Excellent for template work. Carbide tipped, industrial quality. 1-inch cutting height, 2-5/8-inch length. 1/2-inch cutting diameter.

 

Craftsman 8 pc. Carbide-Tipped Router Bit Set - Dovetail. Corner rounding, 1/4 in. Includes one each 1/2 in. Shank diameter. Cove, 3/8 in. 1/4 in. Beading, 1/2 in. Roman ogee, 1/2 in. Straight, 1/4 in. Flush trim and 1/2 in. Straight, 1/2 in.

 

Amana Tool 45850 Dovetail 2-Flute Carbide Tipped Router Bit with Upper Ball Bearing, 1/4-Inch Shank - With a table-mounted router, the template must be underneath the workpiece. . Amana 45850 specifications angle 14° cut diameter 1/2″ flute length 1/2″ shank diameter 1/4″ length 2-1/4″amana 45850 features this dovetail bit has a shank-mounted ball-bearing guide for routing dovetail slots following a template and pattern routing. With a handheld router, the template must be on top of the work. The template must be mounted between the workpiece and the router.

 

Magnate 1724 Bull Nose (Half Round) Carbide Tipped Router Bit – 5/8″ Bead Diameter - For bead cutting and edge rounding on picture frames, stair threads, window sills, etc. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is suited for softwoods, hardwoods, chipboard, plywood and etc. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. It is also equipped with wide open gullets for easy disposal of wood chips. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Excessive overall length may cause tool damage. In case a bit doesn’t come with a speed chart. You may try the following suggestion.

 

Amana Tool MR0110 Corner Rounding with Mini 3/16 Ball Bearing Guide 3/8-Inch Diameter, 3/32-Inch Radius, 1/4-Inch Shank, Carbide Tipped Router Bit - Amana tool exclusive corner rounding miniature bit. 1/4-inch shank, 2 flute. 3/8-inch cutting height, 1-13/16-inch length. Carbide tipped, industrial quality. 3/32-inch radius, 3/8-inch cutting diameter.

 

Amana Tool 45364 Down Shear Plunge Template 3/4-Inch Dia x 2-Inch Cut Height x 1/2 Shank 2-Flute Carbide Tipped Router Bit with Upper Ball Bearing - Cutting diameter 3/4-inch. 1/2-inch shank, 2 flute. 2-inch cutting height. Carbide tipped, industrial quality. Can be used with hand-held and table-mounted portable routers.

 

Timberline 190-10 Flush Trim with Upper Ball Bearing Guide 3/8-Inch Diameter by 1-Inch Cutting Height by1/4-Inch Shank Carbide Tipped Router Bit - 1/4-inch shank, 2 flute. 3/8-inch cutting diameter. Carbide tipped, professional quality. 1-inch cutting height, 2-5/8-inch length. Excellent for template work.

 

Amana Tool 45460-S Dado Clean-Out with Ball Bearing Guide 1/2-Inch Diameter by 1/4-Inch Cutting Height by 1/4-Inch Shank Carbide Tipped Router Bit - 1/4-inch shank, 2 flute. 1/4-inch cutting height. 1-5/8-inch length. 1/2-inch cutting diameter. Carbide tipped, industrial quality.

 

MLCS 6077 Woodworking 1/4-Inch shank Carbide-tipped Router Bit Set, 15-Piece - High quality carbide-tipped set includes 4 straight bits (3/16″, 1/4″, 1/2″, 3/4″), 1 round over bit (3/8″), 1 cove bit (1/2″), 1 roman ogee bit (5/32″), 1 45 deg chamfer bit, 1 flush trim bit (1/2″), 1 rabbeting bit (3/8″), 1 dovetail bit (1/2″ x 14 degree), 1 v-groove bit (3/8″), 1 hinge mortising bit (1/2″), 1 panel pilot bit (1/4″), 1 round nose bit (1/4″), 1 allen wrench and 1 bearing to convert round over bit into beading bit. . Sturdy wood storage box also included.

 

Amana Tool 45418 Straight Plunge 1/2-Inch Diameter by 1-Inch Cutting Height by 1/2-Inch Shank Carbide Tipped Router Bit - 1/2-inch shank, 2 flute. 1/2-inch cutting diameter. Carbide tipped, industrial quality. 1-inch cutting height, 2-5/8-inch length. New superior geometric design for super clean cuts.

 

MLCS 8383 66 Piece Carbide-Tipped Router Bit Set, 1/2-Inch Shank - Assortment set makes a great gift for any woodworker on your list. Incredible value. Storage box is wall-mountable. Quality, carbide-tipped bits. Includes storage box.

 

Amana Tool 45460 Flush Trim Template and Pattern Plunge 2-Flute Carbide Tipped Router Bit with Upper Ball Bearing, 1/4-Inch Shank - 1-inch cutting height. Carbide tipped, industrial quality. Cutting diameter 1/2-inch. 1/4-inch shank, 2-flute.

 

Amana Tool 48100 Special Amerock Hinge 2-Flute Carbide Tipped Router Bit, 1-1/8-Inch Diameter - . For the best results use in table-mounted router. Note these bits are not guaranteed due to fragility and application. Amana 48100 specifications major diameter 1-1/8″ minor diameter 3/8″ cutting length 21/32″ shank diameter 3/8″ overall length 2″ radius 5/64″amana 48100 features this bit is designed to produce a t-slot for amerock hinges.

 

Magnate 819 Core Box 2 Flute Carbide Tipped Router Bit – 1-3/4″ Cutting Diameter - It is suited for softwoods, hardwoods, chipboard, plywood and etc. In case a bit doesn’t come with a speed chart. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. Excessive overall length may cause tool damage. Can be used with the legacy ornamental millÔ to cut indexed flutes and coves on spindle stock or parallel flutes on flat stock. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. It is also equipped with wide open gullets for easy disposal of wood chips. You may try the following suggestion. 817 is designed for nevada style gaming table chip trays. Up shear cutting angle clears chips out fast for accurate and chatter free performance. For use in decorative fluting and sign making. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity.

 

Bosch 85581MC 1-1/2-Inch Diameter 5/8-Inch Cut Classical Carbide Tipped Router Bit 1/4-Inch Shank - All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router. Recommended for use with a routing table.

 

Amana Tool 47116 Flush Trim 1/2-Inch Diameter x 1/2-Inch Cut Height x 1/4-Inch Shank 3-Flute Carbide Tipped Router Bit - Can be used with hand-held and table-mounted portable routers. Carbide tipped, industrial quality. 1/2-inch cutting height. Cutting diameter 1/2-inch. 1/4-inch shank, 3-flute.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.