Top 22 Best Magnetic Tool Holders

 

Magnetic Tool Storage Holding Tray Shelf with Screwdriver Holder - The tray will attach to any ferrous metal surface such as a tool cabinet or refrigerator. Our heavy duty magnetic tool tray is a great organizing tool for your garage, kitchen, or craft room. The 3 holes on each side of the tray are great for storing screwdrivers or other tools. The rubber coated magnets will prevent scratching of any surface. Our magnetic tool storage tray comes with a lifetime warranty.

 

Lodesol Flexible Magnetic Tool Holder 18.75″x5.25″ MPS3620 - Save time and effort by keeping your tools and hardware secure, organized, and close by rather than fishing them out from the engine bay or searching for them on the floor. Place one in your tool box and stop spending time looking for the right tool, your sockets, pliers, and wrenches will stay where you put them. Lodesol flexible magnetic tool holders have a durable vinyl outer shell offering resistance to gasoline, oil, brake fluid, and other common chemicals used in all trades from automotive and marine mechanics to machinists and wood workers. 25″ with a handle allowing you to carry your tools or to hang the tool holder near your workplace. Stop losing small screws, springs, washers and other small hardware while repairing or servicing power tools, electronics, lawnmowers and more. Folds in half to a measurement of 9. 25″ while extended, it provides a long surface with ample space to hold tools and hardware securely. Perfect for mechanics to keep nuts, bolts, and tools in place and organized while on the job. Measuring 18. The patented flexible magnetic membrane provides a superior strength hold over the entire pad and conforms to the surface on which it is placed. If you normally have some nuts and bolts left over or can’t find all your tools after your project, this may be your solution. 5″x5. High abrasion resistance and anti-microbial, these magnetic holders will last a lifetime through the toughest environments and use. The mps3620 magnetic tool holder provides a secure spot to place your tools and hardware. 75″x5.

 

Master Magnetics AM5PLC Magnetic Tool Holder, 6″ Wide, 20 lb per inch, Black Powder Coat with Yellow Stripe - 6″ width, 1625″ height, 1125″ depth approximate overall dimensions screw mount by the two welded, steel tabs with 1/4″ diameter holes screws are included. Holds up to 20 pounds per inch determined by the iron content of the tool or part. Available in 6″, 13″, 18″, 24″ widths with black powder coat or silver nickel plate finish. Designed to securely hold hammers, wrenches, screwdrivers, and iron parts on one side only. Heavy-duty, steel with all-welded construction, ceramic magnets, black powder coat finish and yellow tape.

 

Sunex 8818 Magnetic Tool Holder - Powerful 9-1/2″ x 2″ magnetic surface to hold and organize variety of tools and fasteners. Magnet is incased in steel for long life and durability. Convenient flex handle for easy surface removal and mobility. Built to last.

 

Lodesol Flexible Magnetic Tool Holder 8.25″x6.75″ Mp2012 - Overall product dimensions 8. Save time and effort by keeping your tools and hardware secure, organized, and close by rather than fishing them out from the engine bay or searching for them on the floor. The patented flexible magnetic membrane provides a superior strength hold over the entire pad and conforms to the surface on which it is placed. Magnetic surface dimensions 6. Keep one near your workplace to stop loosing those critical small screws and other hardware required to finish the job. 75″. Lodesol flexible magnetic tool holders have a durable vinyl outer shell offering resistance to gasoline, oil, brake fluid, and other common chemicals used in all trades from automotive and marine mechanics to machinists and wood workers. 25″x6. Stop losing small screws, springs, washers and other small hardware while repairing or servicing power tools, electronics, lawnmowers and more. Perfect for mechanics to keep nuts, bolts, and tools in place and organized while on the job. 35″. Place one in your tool box and stop spending time looking for the right tool, your sockets, pliers, and wrenches will stay where you put them. The mp2012 magnetic tool holder offers a secure place to put your nuts, bolts, and other small parts while you accomplish your projects. 8″x5. If you normally have some nuts and bolts left over or can’t find all your tools after your project, this may be your solution. High abrasion resistance and anti-microbial, these magnetic holders will last a lifetime through the toughest environments and use.

 

Triton Products 72453 MagClip 1-1/2-Inch Black Magnetic Mag Mount Tool Holder 3-Pack - Easily repositioned on any size pegboard or duraboard as required. No pegboard hooks or bars required. Secure directly to the front of any 1/4-inch or 1/8-inch pegboard pegboard. Ideal for holding small and thin items that cannot be held with a pegboard hook.

 

18 in Magnetic Tool Holder - Features tool holder mounts to most surfaces with screws has two magnetic bars for improved stability for use with flat faced tools, not intended for heavy tools with a round profile. With hardly a sideways glance, you can drop one tool onto it, and grab the next. It is not intended for heavy tools with a round profile, such as for turning gouges. The magnetic tool holder measures 2″ wide x 18″ long. Whether squaring up mortises with a chisel or dismantling a clock with a screwdriver, it’s always nice to be able to switch tools quickly without breaking your concentration. That’s where the magnetic tool holder comes in handy. Unlike many other magnetic holders, this one has two magnetic bars to provide stability with flat-faced tools and a little extra grab.

 

3 18″ Magnetic Tool Holders Magnet Organizer Storage Great for Kitchen - Powerful magnet holds tools, and miscellenous items firmly in place. Quantity 3. Comes complete with hardware. Ready for quick installation. Quickly organize your tool shed, garage, or any storage area.

 

Aoxsen Magnetic Wristband With 5 Powerful Magnets Tool Holder Bag for Holding Screws, Nails, Scissors, and Small Tools, Screwdriver Bits, Auto Repair Small Metal Tools (Black 5 Magnet) - 3 third helping hand, whether you’ve been tasked with an important construction project, a diy home improvement job, or a simple fix-it project around the house, it is the perfect third helping hand to complement your hard working style. 1 better design, magnetic wristband equipped with 5 powerful magnets, which make the wristband much more powerful than the similar products on the market it is able to hold more necessary items on it and guarantee for higher efficiency. 2 one size fits most, magnetic wristband, can be adjusted to fit any wrist, unisex design that will suit both men and women one-size-fits-most professional grade piece of equipment that will make the jobs you have to get done. 3 third helping hand, whether you’ve been tasked with an important construction project, a diy home improvement job, or a simple fix-it project around the house, it is the perfect third helping hand to complement your hard working style. 5 multipurpose tool holder, it’s perfect for home improvement, construction, carpentry, auto repair, and many other diy projects it’s also great for fixing ceiling fans, recessed lighting, hvac system, electronic repair, model building, hobbyists, scrapbooking, sewing, gardening, and much more.

 

RamPro 2 24″ Magnetic Tool Holder Bars, Super Strong Heavy-Duty Metal Magnet Storage Tool Organizer Racks Set | For Screwdrivers, Pliers, Wrenches, Knives, Scissors & More (Mounting Screws Included) - âœ“ Easy installation simply install the racks by flush-mounting the bars with the incl screws onto your wall, screw anchors are included for more efficient drywall installation, mount the bars either lined up or separated, then just put on your metallic stuff and watch how the magnetic force grabs it right out of your hand, indicating how strong it is. ✓ Use for sturdy grabs the heaviest iron at your home, basement, office, workshop, studio, shed, on garage walls, kitchen counters, sewing tables, slat boards, steel carts or in any harsh environments, useful for mounting or carrying around screwdrivers, hammers, wrenches, spanners, extensions, ratchets, pliers, sockets, saw blades, fasteners, knives, scissors, screws, scotch tape, ammo magazines or any other kind of ferrous metal objects and hand yard tools. ✓ Design & quality solid steel flat frame with black gloss finish and built in tough magnets catches on and holds firmly anything you attach to it, designed to be screwed into any wall or work table easily and to hang the most devices possible without falling off, stainless steel material makes it last a lifetime, rugged enough for shop use, attractive enough for kitchen. ✓ specs 2 individual bars, 24″ length, 1″ width, ½” height, weighs 193 lb, holds tools weighing up to approx 5 lbs each • 4 mounting phillip screws 1-3/16″ length • 4 screw anchors • mounting holes ¼” diameter. ✓ The ram-pro extremely strong magnetic bar set creates the most efficient way to keep your often-used tools organized, displayed and handy at all times, whether in the home, garage, workshop, office or any other place that needs to get de-cluttered.

 

OEMTOOLS 24921 24 Inch Magnetic Tool Holder by OEMTOOLS - 24 magentic tool barpre-drilled holes for mountingdesigned for professional auto mechanics and heavy duty applicationsblack finishchamfered ends make fastener engagement quick and smoothmount to wall or tool box for extra storage spaceorganizes and holds all metal objects securely in placepredrilled holes for mounting.

 

Capri Tools CP40117 Capri Tools 10-in Magnetic Tool Holder with Swivel Handle, Black - The magnet makes this tool holder attach with superb grip to hand tools, metal toolboxes, etc. Also contains a swivel hook, making it easy to hang anywhere. Can hold a wide variety of tools, including wrenches, screwdrivers, bits, and even some hammers. The sleek, black finish makes it aesthetically pleasing anywhere in your shop, home or office. 10″ magnetic tool holder can help you keep tools and other metal objects organized and conveniently accessible.

 

Master Magnetics AMC24PLC Magnetic Tool Holder, 24″ Wide, 20 lb per inch, Silver Nickel Plate Finish with Red Stripe - 24″ width, 1625″ height, 1125″ depth approximate overall dimensions screw mount by the two welded, steel tabs with 1/4″ diameter holes screws are included. Holds up to 20 pounds per inch determined by the iron content of the tool or part. Heavy-duty, steel with all-welded construction, ceramic magnets, silver nickel plate finish and red tape. Designed to securely hold hammers, wrenches, screwdrivers, and iron parts on one side only. Available in 6″, 13″, 18″, 24″ widths with black powder coat or silver nickel plate finish.

 

Chicago Pneumatic CP9841 Magnetic Tool Holder - Built in socket holder. 1-year parts and labor. High capacity magnetic. Solid construction.

 

Air Foxx AFZ-MAG1005 Magnetic Multi Clip Tool Holder - Perfect for garages, workshops, tool boxes, and more. Powerful magnets hold and organize wrenches, sockets, and fasteners. Tools can be held firmly between clips, or plugged in holes. Hold ferrous and non-ferrous tools. Attached to and metal surface or fix on the wall -screws included.

 

RamPro 12-Inch Magnetic Tool Holder Racks with Mounting Screws (4-Pieces) - âœ“ Easy installation simply install the racks either by flush-mounting, or first mounting the brackets with the incl screws onto your wall and then attaching the bars either connected aligned or separated, and then just put on your metallic stuff and watch how the magnetic force grabs it right out of your hand, indicating how strong it is. ✓ design & quality solid steel flat frame with black gloss finish and tough magnetic force catches on and holds strongly anything that is magnetic, designed to screw onto any wall or work table easily and to hang the most devices possible without falling off, strips can be connected one to another simply by extending it through the adjustable mounting hardware. ✓ The ram-pro extremely strong magnetic bar set creates the most efficient way to keep your often-used tools organized, visualized and handy at all times, whether in the home, garage, workshop, office or any other place that needs to get de-cluttered. ✓ Use for sturdy grabs the heaviest iron at your home, basement, office, workshop, studio, shed, on garage walls, kitchen counters, sewing tables, slat boards, steel carts or in any harsh environments, useful for mounting or carrying around screwdrivers, hammers, wrenches, spanners, extensions, ratchets, pliers, sockets, saw blades, fasteners, knives, scissors, screws, scotch tape, ammo magazines or any other kind of ferrous metal objects and hand yard tools. ✓ Specs 4 individual bars, 12″ length, 1″ width, ½” height, weighs 1 lb, holds tools weighing up to approx 5 lbs each • 8 mounting phillip screws 1-3/8″ length • mounting holes 3/16 inch.

 

Lodesol Flexible Magnetic Tool Holder 13.875″x5.25″ MP2716 - Perfect for mechanics to keep nuts, bolts, and tools in place and organized while on the job. Stop losing small screws, springs, washers and other small hardware while repairing or servicing power tools, electronics, lawnmowers and more. Place one inside your tool box to keep tools from sliding around or place it on the side to keep your more common tools at quick reach. If you normally have some nuts and bolts left over or can’t find all your tools after your project, this may be your solution. 875″x5. Save time and effort by keeping your tools and hardware secure, organized, and close by rather than fishing them out from the engine bay or searching for them on the floor. The mp2716 magnetic tool holder provides a secure spot to place your tools and hardware. 25″ narrow construction fits perfectly along fenders giving you a place to put you tools and hardware. High abrasion resistance and anti-microbial, these magnetic holders will last a lifetime through the toughest environments and use. The patented flexible magnetic membrane provides a superior strength hold over the entire pad and conforms to the surface on which it is placed. Place one in your tool box and stop spending time looking for the right tool, your sockets, pliers, and wrenches will stay where you put them. Lodesol flexible magnetic tool holders have a durable vinyl outer shell offering resistance to gasoline, oil, brake fluid, and other common chemicals used in all trades from automotive and marine mechanics to machinists and wood workers. Long 13.

 

GRIP 67446 Magnetic Tool Holder Set, Black, 3 Piece - Keeps tools off the floor or work bench and within an arms reach. . A great addition to any tool shop or garage storage area. Sizes 8″, 12″, 18″. Powerful magnets hold tool and other ferrous objects in places.

 

18 Inch Magnetic Tool Holder Organizer For Shop Office Kitchen Shed With 9.4 lbs Of Magnetic Pull Easy Mount by USG - Rugged enough for shop use, attractive enough for kitchen. The magnetic strip sits inside a steel formed u-channel bracket. Easily mount to wall, work bench or any flat surface. Organize tools and keep them visible, handy and safely out of the way while you work.

 

Master Magnetics AMC13PLC Magnetic Tool Holder, 13″ Wide, 20 lb per inch, Silver Nickel Plate Finish with Red Stripe - Available in 6″, 13″, 18″, 24″ widths with black powder coat or silver nickel plate finish. Heavy-duty, steel with all-welded construction, ceramic magnets, silver nickel plate finish and red tape. 13″ width, 1625″ height, 1125″ depth approximate overall dimensions screw mount by the two welded, steel tabs with 1/4″ diameter holes screws are included. Designed to securely hold hammers, wrenches, screwdrivers, and iron parts on one side only. Holds up to 20 pounds per inch determined by the iron content of the tool or part.

 

OEMTOOLS 24921 24 Inch Magnetic Tool Holder - This magnetic tool bar will mount to any wall or tool box, providing extra storage space. This tool bar features predrilled holes for easy mounting also. The oemtool’s magnetic tool holder is perfect for organizing metal objects and tools, holding them securely in place.

 

Update International MTH-13P Magnetic Tool Holder with Mounting Screws, Black, 13-Inch, set of 4 - Magnetic tool holder with mounting screws. This wall-mounted tool holder features two magnetic strips to easily keep knives in place. Available in black color measures 13-inch in size. It offers three hooks for non-magnetic items to be stored. It keeps knives away from the fray, but still ready to be used at a moments notice.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.