SDS+ Masonry Carbide Tipped Drill Bits 3/16 x 6-3/8 (Box of 1) BC-SDS316638
- Power tools vermont american 7/8″ x 12″ masonry carbide tipped drill bit 2608682866 bulk#0047/43. For drilling glass, ceramic and tile. Unique spear point design. Tungsten carbide tipped,.
8 PC Masonry Carbide Tipped Drill Bit Set 1/8 5/32 3/16 1/4 9/32 5/16 11/32 3/8
- For drilling brick, concrete, marble, tile, and stone drop forged steel construction sizes 1/8″, 5/32″, 3/16″, 1/4″, 9/32″, 5/16″, 11/32″, 3/8″.
16 PC Masonry Carbide Tipped Drill Bit Set 1/8 5/32 3/16 1/4 9/32 5/16 11/32 3/8
- Drop forged steel construction. 2 of each of the following sizes 1/8″, 5/32″, 3/16″, 1/4″, 9/32″, 5/16″, 11/32″, 3/8″.
1/4″ X 4″ SDS CARBIDE TIPPED DRILL BIT
- They are approximately a 3/8″ diameter shank. These top quality bits are designed for long life and fast cutting through the toughest concrete there isn’t a better bit on the market than the ones we carry you will be very pleased with the productivity you get from our bits. These are the sds shank (also known as sds plus) rotohammer bits.
Precision Twist F D444 Carbide-Tipped Drill 118 Deg HSS 2 7/8″ Flute 4 1/8″ L
- •The carbide-tipped drill bit heads are harder, tougher and more resistant to extreme loads. Fast dust removal provided from 4-flute design. The carbide-tipped drill bit heads are harder and tougher to extreme loads. 4-flute design which provides fast dust removal. Measures 3/4-inch by 8-inches. Sold individually. For use in drill requiring sds-plus shanks.
Hole Saw TCT Steel Cutter Carbide Tipped Drill Bit (cutting diameter:20mm)
- Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type ma. The gears is made from yg8 tungsten carbide steel and the rigidity varies from. Materialcarbide. Sharp gears and anti-cutting with lower consumption make the product a long service life. The hole saw has a twist drill bit inside ,which is undertachable.
Proline CSC4-1/4 1/4-Inch by 4-Inch Carbide Tipped Masonry Drill, 12-Pack
- Carbide tipped for quick penetration and a deep flute for quick evacuation of material drilled. Champion cutting tool proline contractor series masonry drills are designed for rotary and percussion drilling of concrete, brick, terra cotta, sandstone,cinderblock, ceramic tile and slate. The shorter length is excellent for thinner material. Use in light to medium hard building materials. .
Precision Twist D444 Carbide-Tipped Drill #21 118 Deg HSS 2 1/8″ Flute 3 1/4″ L
- Carbide tipped drill bits can be run at speeds 2 to 2 1/2 times faster than regular high speed drill bits and create a better hole finish. Not recommended for soft steel. . Drill shank diameter is the same as the drill bit size. Use on cast aluminum, bronze, cast and ductile irons, fiberglass, hard plastics, and other abrasive nonferrous metals. Bits have a high speed steel body and bright finish.
1/2″ X 18″ SDS CARBIDE TIPPED DRILL BIT
- These top quality bits are designed for long life and fast cutting through the toughest concrete there isn’t a better bit on the market than the ones we carry you will be very pleased with the productivity you get from our bits. These are the sds shank (also known as sds plus) rotohammer bits. They are approximately a 3/8″ diameter shank.
Irwin 50524 Hanson 3/8″ Glass and Tile Carbide Tipped Drill Bit
- Unique spear point design, sizes range from 1/8″-1/2″, tungsten carbide tipped, cuts a perfectly round hole without chipping or breaking. Carded. For drilling glass, ceramic and tile.
1/2″ X 18″ Spline Shank Carbide Tipped Drill Bit
- They are approximately a 3/4″ diameter shank. These top quality bits are designed for long life and fast cutting through the toughest concretethere isn’t a better bit on the market than the ones we carry you will be very pleased with the productivity you get from our bits. Spline shank carbide tipped bits made in usa very high quality finest materials available stocked in many sizes perfect for both industrial and commercial usethese are the spline shank rotohammer bits.
Irwin 50520 Hanson 5/16″ Glass and Tile Carbide Tipped Drill Bit
- Carded. Unique spear point design, sizes range from 1/8″-1/2″, tungsten carbide tipped, cuts a perfectly round hole without chipping or breaking. . For drilling glass, ceramic and tile.
SDS+ Masonry Carbide Tipped Drill Bits 1/4 x 8-5/8 (Box of 1) BC-SDS14858
- Optimized brazing and hardening process for long life in reinforced concrete. 4-flute design for fast dust removal. Optimized flute design to reduce stress and make the bit run cooler.
Irwin 50532 Hanson 1/2″ Glass and Tile Carbide Tipped Drill Bit
- Unique spear point design, sizes range from 1/8″-1/2″, tungsten carbide tipped, cuts a perfectly round hole without chipping or breaking. Carded. For drilling glass, ceramic and tile. .
Bosch HC2122 3/4-Inch by 8-Inch SDS-Plus Shank Carbide-Tipped Masonry Drill Bit
- For use in drill requiring sds-plus shanks. 4-flute design which provides fast dust removal. Fast dust removal provided from 4-flute design. •The carbide-tipped drill bit heads are harder, tougher and more resistant to extreme loads. The carbide-tipped drill bit heads are harder and tougher to extreme loads. Measures 3/4-inch by 8-inches. Sold individually.
Powers Fastening Innovations 00512 Hd-Straight Shank Carbide Tipped Drill, 1/4-Inch by 4-Inch, 1 Per Box
- . Powers is an iso-9001 international anchoring products company with extensive expertise in the following groups mechanical anchors, adhesive, light duty, roofing and carbide drill bits. Powers fasteners is the leading supplier of concrete and masonry anchors in north america and has been a leader in the fastening industry since 1921.
Powers Fastening Innovations 00514 Hd-Straight Shank Carbide Tipped Drill, 1/4-Inch by 13-Inch, 1 Per Box
- Powers is an iso-9001 international anchoring products company with extensive expertise in the following groups mechanical anchors, adhesive, light duty, roofing and carbide drill bits. Powers fasteners is the leading supplier of concrete and masonry anchors in north america and has been a leader in the fastening industry since 1921. .
Amana Tool UNI-5000 5-Piece Carbide Tipped Masonry Drill Bit Set 5/32 Inch, 3/16 Inch, 1/4 Inch, 9/32 Inch, 5/16 Inch
- Tungsten carbide tipped,. Unique spear point design. Carbide tipped. For drilling glass, ceramic and tile.
2 Pack Irwin 50516 Hanson 1/4″ Glass and Tile Carbide Tipped Drill Bit
- For drilling glass, ceramic and tile. Unique spear point design, sizes range from 1/8″-1/2″, tungsten carbide tipped, cuts a perfectly round hole without chipping or breaking. Carded.
M34 Arbor W/Carbide Tipped Drill
- Repeatable results with built-in measuring scales. Accurate hinge positioning with built-in indexing tabs. Simple to use with any drill-no special tools needed. Adjustable cams ensure proper hinge offset. Reliable drilling with bit guide and stop collar.
Sandvik Coromant Delta Carbide-Tipped Drill Bit, Jobber Length, TiN Finish, Cylindrical with Flat Shank, Coolant Through, 140 Degree Point, 1/2″ Size, 3-6/16″ Cutting Length
- Brazed carbide tip and steel body provide increased strength and stability for high speeds in high feed-rate applications. Cylindrical shank with flat is made to iso 9766 specifications, promotes better grip than a standard round shank, and drills more precise holes than shanks with multiple flats. Jobber length drill bit has a midrange drilling depth of 5 times its diameter for general-purpose applications. Titanium nitride (tin) coating offers increased wear resistance, extended tool life, and higher hardness on steel. Coolant-through channels internally guide coolant to the drill bit tip for high feed rates and speeds and continuous clearing of chips.
Drill America DAM Series Carbide-Tipped Masonry Drill Bit, Black Oxide Finish, 1/4″ Round Shank, Spiral Flute, 118 Degrees Conventional Point, 1/4″ Size, 30″ Length (Pack of 1)
- Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Designed for use in portable electric drill. Carbide-tipped tools feature cutting edges of carbide for wear resistance and a steel shank for toughness. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
