Top 20 Fittings

 

SUNGATOR 6-Pack PEX 12 x 12 NPT Female Threaded Adapter Crimp Fitting Lead Free Brass #ad

SUNGATOR 6-Pack PEX 1/2″ x 1/2″ NPT Female Threaded Adapter Crimp Fitting, Lead Free Brass

SUNGATOR 6-Pack PEX 1/2″ x 1/2″ NPT Female Threaded Adapter Crimp Fitting, Lead Free Brass #ad - 【Non-pollution】 lead free brass, comply with drinking water standard. 【Extra-long service life】 high-quality brass resists corrosion, rust and high temperature (32℉-200℉). 【 package includes】 pex 1/2″ x 1/2″ npt female threaded adapter crimp fitting (6-pack). 【Applications】this brass crimp fitting can be used for pex pipes in plumbing jobs. 【Compatible products】 use with stainless steel clamp rings, or pex crimp tool and copper rings(clamp rings are not included in this set).

 

Aluminum Track Fitting 4000 lb Capacity wAluminum Keeper Tiedowns 20-Pack #ad

Aluminum Track Fitting 4,000 lb Capacity w/Aluminum Keeper, Tiedowns 20-Pack

Aluminum Track Fitting 4,000 lb Capacity w/Aluminum Keeper, Tiedowns 20-Pack #ad - The fitting is spring loaded to permit simple attach and detach operation to detach, simply pull up on the spring loaded mechanism and then slide forward or back and the fitting releases to attach, rest the fitting in the load track, then push down on the base and push forward. This listing is for twenty (20) single stud fittings with a rated capacity of 4,000 lbs the wll (working load limit) is a 2,166 lb capacity this fitting fits all aluminum track that is similar to the track shown in the secondary image above we refer to the track as aluminum load track it is also commonly referred to as airplane track, seat or simply s track. The fittings’ aluminum base and stainless steel ring will not rust the steel stud/center post is zinc plated to inhibit corrosion. Rated capacity also known as assembly capacity or break strength is the minimum load a complete assembly can withstand before failure in a laboratory pull test when the product is new wll the maximum load weight a tie-down should be subjected to during normal use to assist in making the proper tie-down choice the federal dot requires the wll to be 1/3 of the rated capacity. Single stud refers to the number of “fingers” that it captures when attached to the aluminum track the base measures 1-3/8″ long x 3/4″ wide with a 3/16″ diameter stainless steel ring that measures 1-3/8″ on center.

 

SharkBite U008LFA Straight Coupling Plumbing 12 Inch Pex Fittings Push-to-Connect Coupler Copper Cpvc #ad

SharkBite U008LFA Straight Coupling Plumbing, 1/2 Inch, Pex Fittings, Push-to-Connect, Coupler, Copper, Cpvc

SharkBite U008LFA Straight Coupling Plumbing, 1/2 Inch, Pex Fittings, Push-to-Connect, Coupler, Copper, Cpvc #ad - Residential and commercial all sharkbite pex tubing and silicone wrap meets the same standards for commercial and residential plumbing applications. Lead-free made of high-quality forged dzr brass that is lead-free. Installs in seconds no special tools, soldering, crimping, or glue just push to create a watertight seal. Versatile sharkbite plumbing fittings fit copper, cpvc, and pex pipe and connect all 3 types in any combination. Made in the usa manufactured and tested in the usa.

 

WYNNsky Air Compressor Accessories Fittings 14NPT Quick Connect Air Coupler and Plug Kit IM Type 14 Pieces Air Tools Fittings Set #ad

WYNNsky Air Compressor Accessories Fittings, 1/4”NPT Quick Connect Air Coupler and Plug Kit, I/M Type, 14 Pieces Air Tools Fittings Set

WYNNsky Air Compressor Accessories Fittings, 1/4”NPT Quick Connect Air Coupler and Plug Kit, I/M Type, 14 Pieces Air Tools Fittings Set #ad - The product comes with 1 year quality warranty. Stainless steel material provide high resistance to abrasion and corrosion. Easy to install and quick disconnect interchangeable/compatible with most manufacturers. I/m type air fittings with 1/4”npt threads. 1/4” basic flow size with max working pressure of 300 psi.

 

Air Fittings Air Coupler and Plug Kit Solid Brass Quick Connect Set Industrial 14 NPT Air Tool Fittings Set with Storage Case 16-Piece #ad

Air Fittings, Air Coupler and Plug Kit, Solid Brass Quick Connect Set, Industrial 1/4″ NPT Air Tool Fittings Set with Storage Case (16-Piece)

Air Fittings, Air Coupler and Plug Kit, Solid Brass Quick Connect Set, Industrial 1/4″ NPT Air Tool Fittings Set with Storage Case (16-Piece) #ad - 【Convenient storage】 well organized in a solid plastic case, easy for storage and carrying out for work, free of worry about losing fittings after handling. 【Kit includes】 8 × male plugs, 4 × female plugs, 2 × male couplers and 2 × female couplers. 【specications】 1/4 inch npt thread × 1/4 inch body size, industrial/m-style(type d) interchange adapts to most manufacturers maximum working pressure is 300 psi. 【Premium materials】 construction of solid brass for high corrosion resistance and a longer using life. 【Quick connection】 quick connection design for easy use to connect and disconnect, simply push to connect, pull sleeve back to remove.

 

12 Pipe Fitting Coupling Home TZH 20 Pack 12 Black Malleable Iron Cast Pipe Coupling for Steam-punk Vintage Shelf Bracket DIY Plumbing Pipe Decor Furniture 20 12 #ad

1/2″ Pipe Fitting Coupling, Home TZH 20 Pack 1/2″ Black Malleable Iron Cast Pipe Coupling for Steam-punk Vintage Shelf Bracket DIY Plumbing Pipe Decor Furniture (20, 1/2″)

1/2″ Pipe Fitting Coupling, Home TZH 20 Pack 1/2″ Black Malleable Iron Cast Pipe Coupling for Steam-punk Vintage Shelf Bracket DIY Plumbing Pipe Decor Furniture (20, 1/2″) #ad - Wide application, the small solid and strong pipe coupling could be used for any shelf installation, such as bookshelf, garden shelf, table and chair corner it can play a good role regardless of its small size, and make your home or garden look more beautiful. 1/2 inch pipe fitting coupling. High quality material, this pipe coupling is mainly composed of iron, carbon and silicon alloy composition, with high strength, good toughness, plasticity and machinability but malleable cast iron is unprocessed and needs to be cleaned and sealed to prevent rust before use. Easy to use, these pipe fittings are threaded, just connect the threaded rods or pipes to the coupling, you can easily to build any shape of frame and shelf for a diy furniture as you like don’t need any screws. 100% money-back guarantee, we offer 90 days unconditional refund or replacement service if there are any quality issues contact us at any time and we will give you a satisfying answer just take a chance of our corner braces and we promise that you will not be disappointed.

 

Pushlock UPSC12-5 Straight Coupling Pipe Fittings Push to Connect Pex Copper CPVC 12 Inch Brass Pack of 5 #ad

Pushlock UPSC12-5 Straight Coupling Pipe Fittings Push to Connect Pex Copper, CPVC, 1/2 Inch, Brass Pack of 5

Pushlock UPSC12-5 Straight Coupling Pipe Fittings Push to Connect Pex Copper, CPVC, 1/2 Inch, Brass Pack of 5 #ad - Residential & commercial all pushlock fittings meet the same standards for commercial and residential plumbing applications. Lead free made with dzr forged brass, 1/2 inch coupling push x push pack of 5. Quick installation no special tools, no soldering, no crimping or glue push to connect design provides an efficient application that saves time and money. Performance 200 psi and 200 degrees f use in potable water and hydronic heating applications. Versatility pushlock plumbing fittings fit copper, pex, cpvc and pe-rt pipe and connects them in any combination- even on wet lines.

 

Milton 716 14 Male NPT M Style Industrial Air fitting Quick Connect Coupler - Box of 10 #ad

Milton (716) 1/4″ Male NPT M Style (Industrial) Air fitting Quick Connect Coupler – Box of 10

Milton (716) 1/4″ Male NPT M Style (Industrial) Air fitting Quick Connect Coupler – Box of 10 #ad - M-style the industry standard coupler milton m-style, colorfit m-style, + red competitor couplers/plugs are all compatible. Included in milton m-style kits #s-221, s-222, mk1669-1, 683-mcpk. Kwik-change interchangeable/compatible with most manufacturers compliant with military specification mil-c-4109. Maximum 40 standard cubic feet per minute (scfm) 300 psi inlet pressure temperatures up to 250 degrees f. Npt 1/4″ male national pipe thread flow size durable brass buna-n seals.

 

Litorange 4 PCS Brass Tube Coupler Pipe Flare Fitting Union Connector Gas Adapter 38 Male Flare x 38 Inch Male Flare #ad

Litorange 4 PCS Brass Tube Coupler Pipe Flare Fitting Union Connector Gas Adapter 3/8″ Male Flare x 3/8 Inch Male Flare

Litorange 4 PCS Brass Tube Coupler Pipe Flare Fitting Union Connector Gas Adapter 3/8″ Male Flare x 3/8 Inch Male Flare #ad - 【Use】 for use with lp and natural gas, refrigeration, and hydraulic applicationsuse with copper, brass, aluminum, or plastic tubing. 【Temperature range】 from -53°c to 121°c (-65 to 250 degree f). 【firm and durable】 litorange brass for corrosion resistance, high temperature ductility and low magnetic permeability. 【Package include】 4 pcs 3/8″ male flare x 3/8″ male flare comes with 1 year guarantee. 【Material】 heavy duty brass,strong and durable connection male flare x male flare.

 

LTWFITTING Brass 14 OD x 14 Male NPT Compression Connector FittingPack of 5 #ad

LTWFITTING Brass 1/4 OD x 1/4 Male NPT Compression Connector Fitting(Pack of 5)

LTWFITTING Brass 1/4 OD x 1/4 Male NPT Compression Connector Fitting(Pack of 5) #ad - Package content 5 pcs(include nut and ferrule). Type male compression connector. Choosing products dimensions and quantities at column of size and colour seperately,price would be more favorable if choosing wholesale. Tube size1/4″ od thread1/4″ male npt. Materies brass, net weight 216g/pc.

 

Litorange 12 inch T PEX Tee 90 Degree Elbow Straight Coupling 12 pack of 12 Lead Free Brass Barb Crimp Pipe FittingFittings #ad

Litorange 1/2 inch T PEX Tee & 90 Degree Elbow & Straight Coupling 1/2″ (pack of 12) Lead Free Brass Barb Crimp Pipe Fitting/Fittings

Litorange 1/2 inch T PEX Tee & 90 Degree Elbow & Straight Coupling 1/2″ (pack of 12) Lead Free Brass Barb Crimp Pipe Fitting/Fittings #ad - Lead free compliant brasseasily installed without flame, flux, or solder and requires no bonding agents, glue, or solvents. Compatiblewattseverhotviegaetc certified for use in potable water applications. 1/2″ pex tee fitting 1/2″ pex coupling fitting 1/2″ pex elbow fitting. Resists corrosion and mineral buildup, rust, and freeze damage suitable for new or retrofit construction and for hot or cold water distribution. Package include 4 pcs 1/2″ pex tee fitting 4 pcs 1/2″ pex coupling fitting 4 pcs 1/2″ pex elbow fitting.

 

WYNNsky Air Coupler and Plug Kit Quick Connect Air Fittings 12 Piece 14 Industrial Solid Brass Quick Connect Set #ad

WYNNsky Air Coupler and Plug Kit, Quick Connect Air Fittings, 12 Piece 1/4″ Industrial Solid Brass Quick Connect Set

WYNNsky Air Coupler and Plug Kit, Quick Connect Air Fittings, 12 Piece 1/4″ Industrial Solid Brass Quick Connect Set #ad - Interchangeable with most manufacturers package included 1pc- 1/4″ fnpt i/m brass coupler 1pc-1/4″ mnpt i/m brass coupler 4pcs- 1/4″ fnpt i/m steel plug 6pcs-1/4″ mnpt i/m steel plug company wynnsky is a professional manufacturer of pneumatic couplers & plugs, air hose fittings, tire repair and tire maintenance products. Description this i/m style coupler kit includes a variety of couplers, plugs and fittings with a 1/4″ basic flow size. 1. Teflon tape must be used with all fittings to achieve maximum performance. We save customer’s cost in each step of our operation, with a guarantee of high-quality and reliability. Recommended use with thread seal tape 4. The sleeve guard helps to reduce the risk of accidental disconnects and protects the coupler sleeve. We deliver the most saving and best value to our customers. It features a durable, solid brass construction that is long-lasting and resistant to corrosion. 1/4″ basic body size with max pressure of 300psi 3. Couplers made of brass and plugs made of case hardened steel plated to resist rust 2. Push connect easy connect system 5. Choose the wynnsky’s products and you will never worry about overpaying or any after-sales service. If you want to know more about our products, please search wynnsky on amazon. They are industrial level for heavy users who require top quality.

 

PEX 12 Barbed 90 Elbows - Crimp Fittings 25 #ad

PEX 1/2 Barbed 90 Elbows – Crimp Fittings 25

PEX 1/2 Barbed 90 Elbows – Crimp Fittings 25 #ad - Zurn. Watts. Everhot. Viega. 1/2″ pex x 1/2″ pex elbow 90 made from lead-free brass, complies with 2014 sdwa and is approved for potable water applications pex x pex elbows are used to insert and connect two pex pipes togethercompatible with all types and brands of pex tubing.

 

SharkBite UC362LFA10 12 Tee PEX Barb Fitting 10-Pack 1 Brass #ad

SharkBite UC362LFA10 1/2″ Tee PEX Barb Fitting (10-Pack), 1, Brass

SharkBite UC362LFA10 1/2″ Tee PEX Barb Fitting (10-Pack), 1, Brass #ad - 10 pack, 1/2″, lead free brass barb insert tee, for connecting 3 pieces of 1/2″ cross link polyethylene pex tubing, secure barb ends of fittings to pex pipe with tv #608-933 cinch clamps and tv #608-743 cinch tool, or copper crimp rings and crimp tool, immediately testable to well over 100 psi, meets the new nsf/ansi standard 14-2009 and astm f 1807-9si standard for products intended for the transport of potable water, ansi/nsf standard 61 annex g for lead free compliance and the wetted surface of this product contacted by consumable water contains less than 0. 25% of lead by weight to meet ab1953 california and vt s152 vermont low lead restrictions.

 

POWERTEC 70106 4-Inch Y-Fitting Dust Hose Connector #ad

POWERTEC 70106 4-Inch Y-Fitting Dust Hose Connector

POWERTEC 70106 4-Inch Y-Fitting Dust Hose Connector #ad - Three 4-inch nominal ends measure 3-61/64-inch od and 3-3/4-inch id. Tough, durable abs plastic material. Provides a multitude of applications. Simple and quick to install. Overall dimension 9-13/16-inch x 4-1/16-inch x 8-1/4-inch provides airtight friction fit.

 

Milton 602 14 MNPT 38 ID Hose End Fitting - Box of 10 #ad

Milton 602 1/4″ MNPT 3/8″ ID Hose End Fitting – Box of 10

Milton 602 1/4″ MNPT 3/8″ ID Hose End Fitting – Box of 10 #ad - For best results and professional finished product the hose end should be secured with a crimped ferrule. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desirable. Male hose end with barb. 1/4″ male hose end with 3/8″ id hose.

 

SUNGATOR 12-Pack Air Hose Fittings 14 NPT to 38 Barb Hose Barb Adapter Brass Pipe Fittings Male Threaded End #ad

SUNGATOR 12-Pack Air Hose Fittings, 1/4″ NPT to 3/8″ Barb, Hose Barb Adapter, Brass Pipe Fittings Male Threaded End

SUNGATOR 12-Pack Air Hose Fittings, 1/4″ NPT to 3/8″ Barb, Hose Barb Adapter, Brass Pipe Fittings Male Threaded End #ad - 【function】 barb head for connecting hoses, npt end used to connect npt pipes, brass is corrosion resistant which can apply to water, gas, oil and fuel as well as air tools. 【Durable】 the barb fitting is not a cast product and has a thick wall, providing a longer service life than iron and iron galvanized pipe fittings. 【Operating temperatures】 solid brass can withstand up to 100 °c (212 °f). 【Superior threads】 deeper and smoother threads with barbed edges provide effective connection. 【Premium material】 high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion, 3/8″barb x 1/4″npt male pipe, 12 pack.

 

SharkBite U412LFA Plumbing Fitting 34 inch x 34 inch x 12 inch Brass #ad

SharkBite U412LFA Plumbing Fitting, 3/4 inch x 3/4 inch x 1/2 inch, Brass

SharkBite U412LFA Plumbing Fitting, 3/4 inch x 3/4 inch x 1/2 inch, Brass #ad - Certified can be used in wet lines shark bite fittings are certified to 200 psi and 200 degrees fahrenheit and can be reused up to 4 times. Quality shark bite quality and performance is field-proven with more than 550 million connections shark bite is the only push-to-connect brand that can ensure a clean, leak-free connection. Behind the wall approved for underground and behind walls without access panels (wrapping required when burying underground). Installs in seconds reducing tee requires no soldering, crimping, or glue just push to create a watertight seal. Versatile connect different-sized pex, copper, cpvc, pe-rt, and hdpe pipe in any combination.

 

30 12 POLY ALLOY PEX FITTINGS 10 EA-ELBOW COUPLER TEE #ad

(30) 1/2″ POLY ALLOY PEX FITTINGS 10 EA-ELBOW, COUPLER, TEE

(30) 1/2″ POLY ALLOY PEX FITTINGS 10 EA-ELBOW, COUPLER, TEE #ad - Compatible for hot or cold water systems can be used for radiant or potable water applications. Compatible with any brand of pex manufactured to north american standard. 10 pcs, 1/2″ poly alloy pex elbow. 10 pcs, 1/2″ poly alloy pex coupler/splice. 10 pcs, 1/2″ poly alloy pex tee.

 

SELLERS360 5way 34 inch Tee PVC Fitting Elbow - Build Heavy Duty PVC Furniture - PVC Elbow FittingsPack of 10 #ad

SELLERS360 5way 3/4 inch Tee PVC Fitting Elbow – Build Heavy Duty PVC Furniture – PVC Elbow Fittings[Pack of 10]

SELLERS360 5way 3/4 inch Tee PVC Fitting Elbow – Build Heavy Duty PVC Furniture – PVC Elbow Fittings[Pack of 10] #ad - 5-way tees are ideal for center connections structural grade pvc has tapered edges and a beautiful glossy surface, ideal for display items such as furniture, shelves, pool products, and so much more it delivers when appearance is important. One year warranty superior, glossy white surface finish with tapered sockets for a professional appearance. Top quality, schedule 40 pvc pvc fittings can take a beating they are designed to withstand impacts, or drops from a substantial height and won’t suffer any cracks or breakage compared to standard, plumbing-grade pvc fittings. This furniture grade pvc is perfect for building pvc furniture. #1 rated pvc furniture connectors.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.