Top 18 Grooved Pulleys for 2020

 

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 2  Dia X 34  Bore Bulk

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 2 ” Dia X 3/4 ” Bore Bulk

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 2 ” Dia X 3/4 ” Bore Bulk - Class 30 gray cast iron for resistance to wear and galling. One groove for single-belt fractional horsepower use. Double flange to resist belt side thrust and maintain belt contact. Pulley fits round-profile belts (not included) up to 0375″ diameter. Set screw locks hub to shaft.

 

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 2  Dia X 34  Bore Bulk

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 2 ” Dia X 3/4 ” Bore Bulk

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 2 ” Dia X 3/4 ” Bore Bulk - Use with truflex belts. Precision machined grooves. Single or double groove designs are available.

 

Boston Gear G1216 Grooved Pulley Fits Round Belts 01875 or Smaller 0250 Face Brass

Boston Gear G1216 Grooved Pulley, Fits Round Belts 0.1875″ or Smaller, 0.250″ Face, Brass

Boston Gear G1216 Grooved Pulley, Fits Round Belts 0.1875″ or Smaller, 0.250″ Face, Brass - Pulleys must match the belts that connect them (timing pulleys with trapezoidal grooves require a belt with trapezoidal teeth) and engage either on the sides of the pulley flange (classical v-belts, narrow v-belts, or round belts), on the flat outer diameter of the pulley (flat belts), or in pulley grooves that match belt teeth (timing belts, synchronous belts, or curvilinear belts). Pulleys are made of various materials, including cast iron, steel, aluminum, polycarbonate resin thermoplastic, and nylon, and they can meet a broad range of requirements, including increased torque, resistance to wear, and light weight. Pulleys (sheaves) are available in different types v-belt, timing, round, or flat. Boston gear manufactures gears, gear drives, bearings, valves, shaft collars, couplings, and other power and fluid transmission components. The company, founded in 1877, is headquartered in charlotte, nc, and meets international organization for standardization (iso) standard 90012008 standard. Pulley drive systems consist of two or more pulleys that connect with a belt to transmit mechanical power across greater distances than systems that use gears. Pulleys are used in drive designs in the automotive, appliance, agriculture, textile, printing, mining, and office equipment industries.

 

Oreck Brush Roll With Grooved Pulley U2000Eb U2000Rb U2000Rb-1 76218-01

Oreck Brush Roll With Grooved Pulley (U2000Eb, U2000Rb & U2000Rb-1) #76218-01

Oreck Brush Roll With Grooved Pulley (U2000Eb, U2000Rb & U2000Rb-1) #76218-01 - Material die cast. Belts that fit 4l/a. Inside diameter 1/2″. Inside diameter exact 05″.

 

Single V Grooved Pulley 38

Single V Grooved Pulley, 3/8″

Single V Grooved Pulley, 3/8″ - 2-inch diameter with 3/8-inch bore. Has slotted headless set screw. The chicago die-cast, single v-grooved pulley is for a belts size 4l or 1/2 by 11/32 inches. Dimensions 2. Packed in sta-pak cartons.

 

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 2  Dia X 34  Bore Bulk

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 2 ” Dia X 3/4 ” Bore Bulk

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 2 ” Dia X 3/4 ” Bore Bulk - Single or double groove designs are available. Precision machined grooves. Use with truflex belts.

 

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 5  Dia X 12  Bore Bulk

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 5 ” Dia X 1/2 ” Bore Bulk

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 5 ” Dia X 1/2 ” Bore Bulk - For fractional horse power electric motors. Bulk. Zinc die cast. “A” section belt width.

 

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 8  Dia X 34  Bore Bulk

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 8 ” Dia X 3/4 ” Bore Bulk

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 8 ” Dia X 3/4 ” Bore Bulk - “A” section belt width. For fractional horse power electric motors. Bulk. Zinc die cast.

 

New Vacuum Brush roll fit Oreck Grooved Pulley U2000EB U2000RB 75881-01 7588101

New Vacuum Brush roll fit Oreck Grooved Pulley U2000EB U2000RB 75881-01 7588101

New Vacuum Brush roll fit Oreck Grooved Pulley U2000EB U2000RB 75881-01 7588101 - Inside diameter 1/2″. Inside diameter exact 05″. Material die cast. Belts that fit 4l/a.

 

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 2-14  Dia X 12  Bore Bulk

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 2-1/4 ” Dia X 1/2 ” Bore Bulk

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 2-1/4 ” Dia X 1/2 ” Bore Bulk - 2-1/4″d x 1/2″bore. Sold as 4 units at $6. 49 per unit. Country of origin (tba). ) “A” section belt width. Zinc die cast. Distributed by chicago die casting. Bulk. Manufacturer number 225a5. For fractional horse power electric motors. Sku # 22800. (1 unit = each.

 

Boston Gear G1206 Webbed Grooved Pulley 0625 Bore Fits Round Belts 0375 or Smaller 0500 Face 1625 Hub Diameter 4000 Outside Diameter Iron

Boston Gear G1206 Webbed Grooved Pulley, 0.625″ Bore, Fits Round Belts 0.375″ or Smaller, 0.500″ Face, 1.625″ Hub Diameter, 4.000″ Outside Diameter, Iron

Boston Gear G1206 Webbed Grooved Pulley, 0.625″ Bore, Fits Round Belts 0.375″ or Smaller, 0.500″ Face, 1.625″ Hub Diameter, 4.000″ Outside Diameter, Iron - Class 30 gray cast iron for resistance to wear and galling. Double flange to resist belt side thrust and maintain belt contact. Set screw locks hub to shaft. Pulley fits round-profile belts (not included) up to 0375″ diameter. One groove for single-belt fractional horsepower use.

 

Boston Gear G1215 Grooved Pulley Fits Round Belts 01875 or Smaller 0250 Face Brass

Boston Gear G1215 Grooved Pulley, Fits Round Belts 0.1875″ or Smaller, 0.250″ Face, Brass

Boston Gear G1215 Grooved Pulley, Fits Round Belts 0.1875″ or Smaller, 0.250″ Face, Brass - Pulleys are used in drive designs in the automotive, appliance, agriculture, textile, printing, mining, and office equipment industries. Pulleys (sheaves) are available in different types v-belt, timing, round, or flat. The company, founded in 1877, is headquartered in charlotte, nc, and meets international organization for standardization (iso) standard 90012008 standard. Boston gear manufactures gears, gear drives, bearings, valves, shaft collars, couplings, and other power and fluid transmission components. Pulley drive systems consist of two or more pulleys that connect with a belt to transmit mechanical power across greater distances than systems that use gears. Pulleys are made of various materials, including cast iron, steel, aluminum, polycarbonate resin thermoplastic, and nylon, and they can meet a broad range of requirements, including increased torque, resistance to wear, and light weight. Pulleys must match the belts that connect them (timing pulleys with trapezoidal grooves require a belt with trapezoidal teeth) and engage either on the sides of the pulley flange (classical v-belts, narrow v-belts, or round belts), on the flat outer diameter of the pulley (flat belts), or in pulley grooves that match belt teeth (timing belts, synchronous belts, or curvilinear belts).

 

Boston Gear G1220 Grooved Pulley Fits Round Belts 01875 or Smaller 0250 Face Brass

Boston Gear G1220 Grooved Pulley, Fits Round Belts 0.1875″ or Smaller, 0.250″ Face, Brass

Boston Gear G1220 Grooved Pulley, Fits Round Belts 0.1875″ or Smaller, 0.250″ Face, Brass - Pulleys are made of various materials, including cast iron, steel, aluminum, polycarbonate resin thermoplastic, and nylon, and they can meet a broad range of requirements, including increased torque, resistance to wear, and light weight. Boston gear manufactures gears, gear drives, bearings, valves, shaft collars, couplings, and other power and fluid transmission components. Pulleys are used in drive designs in the automotive, appliance, agriculture, textile, printing, mining, and office equipment industries. Pulley drive systems consist of two or more pulleys that connect with a belt to transmit mechanical power across greater distances than systems that use gears. The company, founded in 1877, is headquartered in charlotte, nc, and meets international organization for standardization (iso) standard 90012008 standard. Pulleys must match the belts that connect them (timing pulleys with trapezoidal grooves require a belt with trapezoidal teeth) and engage either on the sides of the pulley flange (classical v-belts, narrow v-belts, or round belts), on the flat outer diameter of the pulley (flat belts), or in pulley grooves that match belt teeth (timing belts, synchronous belts, or curvilinear belts). Pulleys (sheaves) are available in different types v-belt, timing, round, or flat.

 

Boston Gear G1214 Grooved Pulley Fits Round Belts 01875 or Smaller 0250 Face Brass

Boston Gear G1214 Grooved Pulley, Fits Round Belts 0.1875″ or Smaller, 0.250″ Face, Brass

Boston Gear G1214 Grooved Pulley, Fits Round Belts 0.1875″ or Smaller, 0.250″ Face, Brass - Pulleys (sheaves) are available in different types v-belt, timing, round, or flat. Pulley drive systems consist of two or more pulleys that connect with a belt to transmit mechanical power across greater distances than systems that use gears. Pulleys must match the belts that connect them (timing pulleys with trapezoidal grooves require a belt with trapezoidal teeth) and engage either on the sides of the pulley flange (classical v-belts, narrow v-belts, or round belts), on the flat outer diameter of the pulley (flat belts), or in pulley grooves that match belt teeth (timing belts, synchronous belts, or curvilinear belts). Boston gear manufactures gears, gear drives, bearings, valves, shaft collars, couplings, and other power and fluid transmission components. Pulleys are made of various materials, including cast iron, steel, aluminum, polycarbonate resin thermoplastic, and nylon, and they can meet a broad range of requirements, including increased torque, resistance to wear, and light weight. Pulleys are used in drive designs in the automotive, appliance, agriculture, textile, printing, mining, and office equipment industries. The company, founded in 1877, is headquartered in charlotte, nc, and meets international organization for standardization (iso) standard 90012008 standard.

 

Boston Gear G1219 Grooved Pulley Fits Round Belts 01875 or Smaller 0250 Face Brass

Boston Gear G1219 Grooved Pulley, Fits Round Belts 0.1875″ or Smaller, 0.250″ Face, Brass

Boston Gear G1219 Grooved Pulley, Fits Round Belts 0.1875″ or Smaller, 0.250″ Face, Brass - Pulleys are made of various materials, including cast iron, steel, aluminum, polycarbonate resin thermoplastic, and nylon, and they can meet a broad range of requirements, including increased torque, resistance to wear, and light weight. Pulleys are used in drive designs in the automotive, appliance, agriculture, textile, printing, mining, and office equipment industries. Pulleys must match the belts that connect them (timing pulleys with trapezoidal grooves require a belt with trapezoidal teeth) and engage either on the sides of the pulley flange (classical v-belts, narrow v-belts, or round belts), on the flat outer diameter of the pulley (flat belts), or in pulley grooves that match belt teeth (timing belts, synchronous belts, or curvilinear belts). The company, founded in 1877, is headquartered in charlotte, nc, and meets international organization for standardization (iso) standard 90012008 standard. Pulley drive systems consist of two or more pulleys that connect with a belt to transmit mechanical power across greater distances than systems that use gears. Pulleys (sheaves) are available in different types v-belt, timing, round, or flat. Boston gear manufactures gears, gear drives, bearings, valves, shaft collars, couplings, and other power and fluid transmission components.

 

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 6  Dia X 12  Bore Bulk

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 6 ” Dia X 1/2 ” Bore Bulk

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 6 ” Dia X 1/2 ” Bore Bulk - 57 per unit. Manufacturer number 600a5. Sold as 2 units at $14. Distributed by chicago die casting. Sku # 22827. Bulk. ) “A” section belt width. Zinc die cast. 6″ d x 1/2″ bore. For fractional horse power electric motors. Country of origin (tba). (1 unit = each.

 

Jack Sealey - Sealey Pulley HoldingLocking Tool - Grooved Pulleys

Jack Sealey – Sealey Pulley Holding/Locking Tool – Grooved Pulleys

Jack Sealey – Sealey Pulley Holding/Locking Tool – Grooved Pulleys - May be used to rotate camshaft pulleys for timing purposes and also for removing oil/fuel filters. Use in conjunction with spanner or ratchet wrench. Use in conjunction with spanner or ratchet wrench. May be used to rotate camshaft pulleys for timing purposes and also for removing oil/fuel filters. Suitable for locking auxiliary drive belt pulleys as found on air conditioning pumps. Model no. Vs0942 list price £ suitable for locking auxiliary drive belt pulleys as found on air conditioning pumps.

 

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 6  Dia X 12  Bore Bulk

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 6 ” Dia X 1/2 ” Bore Bulk

Chicago Die Cast Single V Grooved Pulley A Section Belt Width 6 ” Dia X 1/2 ” Bore Bulk - For fractional horse power electric motors. Bulk. “A” section belt width. Zinc die cast.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.