Top 18 Best Jamb Saws

 

IRWIN Tools ProTouch Dovetail / Jamb Saw, 10-inch (2014450) by Irwin Tools - This dovetail saw uses a spring-loaded, reversible blade that can be used for left- or right-cuttingthe protouch handle on each jamb saw provides ergonomic comforta wide-body flush-cut blade on this dovetail saw measures 50 mm14-pt. Tooth count10 blade length and 2 blade thickness.

 

Crain 812 Door Jamb Saw Kit - Kit includes saw, carbide blade, masonry blade and caring case. Door as thick as 1-3/4-inch can be cut without removal. Blade height is adjustable from flush to 1-1/4-inch. Designed for undercutting jambs, doors or walls.

 

Roberts Jamb Saw Blade - . Dimensions overall length, end to end -6 inches. Overall height, top to bottom -1 inches. 10-42 features -jamb saw blade. -Cutting through tough wood and is excellent for cutting door jams, baseboards and along walls. Generic dimensions -4. 25” diameter with 20 extra fine teeth for a smooth cut. Overall product weight -1 pounds. -carbide tipped for extra toughness. Product type -circular.

 

ProTouch 10 Dovetail and Jamb Saw - Wide-body� blade (50mm). Patent-pending protouch� handles. Reversible flush-cut� blade.

 

Roberts 17076 10-46 6-Inch Jamb Saw with Case by Roberts - . 6-inch jamb saw with 5-4/5-amp, 900-watt industrial grade motor featuring ball and needle bearingspatented design cuts full inside corners in molding up to 1/2-inch thick, undercut doors up to 1-3/4-inchadjustable cutting depth guide prevents cutting into plaster or wall board when trimming base boardsprecision height adjustment from flush to 1-1/16-inch, spiral ground gears for smooth, quiet operationincludes custom molded carrying case, 6-3/16-inch carbide-tipped blade, 1-year product warrantycarrying case colors may vary.

 

ProTouch 10 Dovetail and Jamb Saw - Wide-body� blade (50mm). Patent-pending protouch� handles. Reversible flush-cut� blade.

 

Roberts 10-47-2 6-3/16-Inch 36-Tooth Carbide Tip Saw Blade for 10-55 Jamb Saw - It easily cuts through tough wood and is excellent for cutting door jams, baseboards and along walls. This blade can be used with the roberts 10-55 jamb saw. The 10-47-2 is a 20-tooth replacement blade for the jamb saw. Carbide tipped for extra toughness. .

 

QEP 10-55 Long Neck Jamb Saw - Trigger in tail is easier to hold while operating saw, providing greater safety. Extended tail on motor provides excellent control of saw. Patented design enables saw to cut full inside corners in molding up to 1/2 thick cuts up to 1-3/4 deep. Precision height adjustment from flush to 1-1/16. 120 volts (with north american plug), 95 amps, 1,050 watts, 8,000 rpm motor.

 

Roberts 10-56 Long Neck Jamb and Undercut Saw with Case - Easily door jambs, molding and undercuts doors for flooring installation, with extended “long neck” handle for maximum leverage against torque. Precision height adjustment from flush to 1-1/16 in. Patented design enables saw to cut full inside corners in molding up to 1/2 in thick. 1100-watt industrial motor and carbide tipped blade make cutting accurate and easy. Compatible with blades model # 10-47-2 (1 included) and 10-47-6 (sold separately).

 

Roberts 17076 10-46 6-Inch Jamb Saw with Case - Patented design cuts full inside corners in molding up to 1/2-inch thick, undercut doors up to 1-3/4-inch. Precision height adjustment from flush to 1-1/16-inch, spiral ground gears for smooth, quiet operation. 6-inch jamb saw with 5-4/5-amp, 900-watt industrial grade motor featuring ball and needle bearings. Carrying case colors may vary. Includes custom molded carrying case, 6-3/16-inch carbide-tipped blade, 1-year product warranty. Adjustable cutting depth guide prevents cutting into plaster or wall board when trimming base boards.

 

6 3/16 Jamb Saw Carbide Blade - Flush cut capable. Made in germany. Blade mount works with bosch, skil, milwauke, dremel and ridgid. For use only in roberts no10-46 and no10-55 jamb saws. Perfect for door jamb’s or toe kicks.

 

ProTouch 10 Dovetail and Jamb Saw - Reversible flush-cut blade. Spring-loaded pin enables the blade to reverse for left or right cutting. Protouch dovetail/jamb saw, wide-body blade (50mm). . Ergonomic protouch handle.

 

Roberts 10-47-6 20-Tooth Carbide Tip Saw Blade for 10-55 Jamb Saw, 6-3/16-Inch - This blade can be used with the roberts 10-55 jamb saw. The 10-47-6 is a 20-tooth replacement blade for the jamb saw. Carbide tipped for extra toughness. It easily cuts through tough wood and is excellent for cutting door jams, baseboards and along walls.

 

QEP 10-55 Long Neck Jamb Saw by QEP - Cuts up to 1-3/4 deepprecision height adjustment from flush to 1-1/16120 volts (with north american plug), 9. Extended tail on motor provides excellent control of sawtrigger in tail is easier to hold while operating saw, providing greater safetypatented design enables saw to cut full inside corners in molding up to 1/2 thick. 5 amps, 1,050 watts, 8,000 rpm motor.

 

New Q.e.b. Roberts 10-56 Electric 6″ Longneck Jamb Saw Kit Sale 900 Watts New - Specs 900 watt motor 8000 rpm 6-3/16′ blade. 2 lbs. P. E. 900 watt. Electric jamb sawq. Roberts model 10-55factory sealed newauthorized dealer–full factory warrantygreat sale priceunit has an adjustable cutting depth guide that prevents cutting into plaster or wall board when trimming cove bases large 6-3/16′ blade with cupped arbor for precise flush cuts blade height adjusts from flush to 1/16′ easy access trigger extended tail for maximum leverage against torque trigger is non-locking complies with osha requirements adjustable blade height. 18’lx8’wx4’h weight 5.

 

IRWIN Tools ProTouch Dovetail / Jamb Saw, 10-inch (2014450) - 14-pt tooth count. Wide-body� blade (50mm). Reversible flush-cut� blade. 10″ blade length and 2″ blade thickness. The protouch handle on each jamb saw provides ergonomic comfort. Patent-pending protouch� handles. This dovetail saw uses a spring-loaded, reversible blade that can be used for left- or right-cutting. A wide-body flush-cut blade on this dovetail saw measures 50 mm.

 

jamb saw Undercut Hand Laminate Flooring Tool - The piece of flooring will guide the undercut saw keeping it straight, and at the proper height to accommodate the new flooring. This trick will remove any margin of error of “measure twice and cut once. High carbon steel blade, and a comfortable wooden handle. ” Length 12″ blade / 300mm. Set the undercut saw on top the scrap flooring and make your cut. Undercut saw used to undercut door jambs to eliminate tight fits. Lay a piece of scrap flooring on the ground up against the jamb you need to cut.

 

QEP Undercut and Jamb Saw with High Carbon-Steel Blade - Designed for undercutting door jambs and other obstacles during flooring installations high-carbon steel blade for durability aggressive 1-point tooth pattern to handle tough tasks efficient trapezoid shape ensures ease of use extra large, rubberized handle and ergonomic design offer additional comfort.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.