Top 17 Plate Clamps

 

CR LAURENCE EH17 CRL Brass Face Plate Clamp for 38 to 12 Glass

C.R. LAURENCE EH17 CRL Brass Face Plate Clamp for 3/8″ to 1/2″ Glass

C.R. LAURENCE EH17 CRL Brass Face Plate Clamp for 3/8″ to 1/2″ Glass - One clamp per pack. For use with 3/8″ (10 mm) glass we recommend crl cat. Color brassheight 1-31/32″ (50 mm)width 1-9/16″ (39. . Important notesnot appropriate for glass railing applications. 6 mm)ideal for flush glazingfor 3/8″ to 1/2″ (10 to 12 mm) glasssolid brasscrl heavy glass face plate clamps are universal in design and solve many glass mounting problems. A gasket is supplied for 1/2″ (12 mm) glass. One of our most popular sellers for flush glazing, or attaching shelves to walls, this clamp has a removable face plate secured with two screws. No. 820 tuff-pak tape.

 

Toggle Clamp Mounting Plate

Toggle Clamp Mounting Plate

Toggle Clamp Mounting Plate - It’s a great way to add a hold-down to fences with top-mounted t-tracks. This convenient plate allows any of our toggle clamps to quickly and easily attach directly to a t-track. . The steel plate features adjustable slots to accommodate a wide variety of toggle clamps and comes complete with mounting screws and all the necessary hardware and knobs. Toggle clamps sold separately. Just mount a toggle clamp to the plate, then affix the whole assembly to any t-track on the market. Use it to get the most out of your toggle clamps and any workbenches, tables, jigs or surfaces with t-tracks.

 

Topal 51068 TLH2 0-120 Horizontal Plate Clamp

Topal 51068 TLH2 0-120 Horizontal Plate Clamp

Topal 51068 TLH2 0-120 Horizontal Plate Clamp - . The tlh is a horizontal lifting clamp that automatically adjusts to the load thickness by a pivoting actuator that secures every load by the lifting action of the clamp. Grade 80 or higher chain slings are required but not provided.

 

Vestil LPC-40 Positive Locking Plate Clamp 11875 Thick Serrated Grip 4000 lbs Working Load Limit 22 Bale Opening 295 Throat Depth

Vestil LPC-40 Positive Locking Plate Clamp, 1.1875″ Thick, Serrated Grip, 4000 lbs Working Load Limit, 2.2″ Bale Opening, 2.95″ Throat Depth

Vestil LPC-40 Positive Locking Plate Clamp, 1.1875″ Thick, Serrated Grip, 4000 lbs Working Load Limit, 2.2″ Bale Opening, 2.95″ Throat Depth - Designed to meet asme b30. Forged head and gear. 20 standards. Plate must be clean and free of oil. Not designed to use on stainless steel or aluminum plates. Safety factor is 2 to 1. Power coated finish. Grips sheet until release ring is pulled. For use with materials with a surface hardness to 30 rc (300 hb). Lift only one plate at a time. Do not use plate clamps to lift loads less than 20 percent of rated capacity. Serrated gripper is hardened tool steel. 800 lbs plate weight.

 

i-Lift Equipment ICD1B Universal Plate Clamp 2200 lb Working Load Limit

i-Lift Equipment ICD1B Universal Plate Clamp, 2200 lb Working Load Limit

i-Lift Equipment ICD1B Universal Plate Clamp, 2200 lb Working Load Limit - Safety mechanism on clamps ensuring clamp does not slip. Lock for both closed and open positions of the clamp. Manufactured with high quality carbon steel. Articulated lifting shackle. For lifting and transporting steel plates and structures from any position (horizontal, vertical and sideways).

 

Vestil EPC-40 Vertical Plate Clamp 1 Plate Thickness 4000 lbs Working Load Limit 238 Bale Opening

Vestil EPC-40 Vertical Plate Clamp, 1″ Plate Thickness, 4000 lbs Working Load Limit, 2.38″ Bale Opening

Vestil EPC-40 Vertical Plate Clamp, 1″ Plate Thickness, 4000 lbs Working Load Limit, 2.38″ Bale Opening - Not designed to use on stainless steel or aluminum plates. Automatic serrated hardened steel cams and pads. 800 lbs minimum plate weight. 9″ throat depth. Designed to meet asme b30. Warning do not exceed the working load limit. Serious bodily injury or property damage may result. 20. Pivoting bale for easier and more versatile operation. Drop-forged steel case for maximum strength. For use with materials with a surface hardness to 30 rc (300 hb). 2.

 

i-Lift Equipment ICD2 Universal Plate Clamp 4400 lb Working Load Limit

i-Lift Equipment ICD2 Universal Plate Clamp, 4400 lb Working Load Limit

i-Lift Equipment ICD2 Universal Plate Clamp, 4400 lb Working Load Limit - Manufactured with high quality carbon steel. For lifting and transporting steel plates and structures from any position (horizontal, vertical and sideways). Safety mechanism on clamps ensuring clamp does not slip. Lock for both closed and open positions of the clamp. Articulated lifting shackle.

 

Vestil HPC-20 Horizontal Plate Lifting Clamp Steel 1316 Plate Thickness 2000 lbs Working Load Limit 12 Bale Opening

Vestil HPC-20 Horizontal Plate Lifting Clamp, Steel, 13/16″ Plate Thickness, 2000 lbs Working Load Limit, 1.2″ Bale Opening

Vestil HPC-20 Horizontal Plate Lifting Clamp, Steel, 13/16″ Plate Thickness, 2000 lbs Working Load Limit, 1.2″ Bale Opening - For use with materials with a surface hardness to 30 rc (300 hb). Lift only one plate at a time. Plate must be clean and free of oil. Meets asme b30. 20 specifications. 400 pounds min uniform plate weight. Do not use plate clamps to lift loads less than 20 percent of rated capacity. Not designed to use on stainless steel or aluminum plates. Designed for lifting plate material in horizontal position. Heavy-duty steel construction for years of reliable use.

 

Vestil CPC-20 Heavy Duty Steel Vertical Plate Clamps with Chain 08 Plate Thickness 2000 lbs Working Load Limit minimum plate weight 400 lbs 300 Bale Opening 3 Throat Depth

Vestil CPC-20 Heavy Duty Steel Vertical Plate Clamps with Chain, 0.8″ Plate Thickness, 2000 lbs Working Load Limit (minimum plate weight 400 lbs), 3.00″ Bale Opening, 3″ Throat Depth

Vestil CPC-20 Heavy Duty Steel Vertical Plate Clamps with Chain, 0.8″ Plate Thickness, 2000 lbs Working Load Limit (minimum plate weight 400 lbs), 3.00″ Bale Opening, 3″ Throat Depth - Heavy-duty steel construction for years of reliable use. 20 specifications. Meets asme b30. Lifting eye includes chain for greater versatility. Plate must be clean and free of oil. Lift only one plate at a time. For use with materials with a surface hardness to 30 rc (300 hb). 400 pounds minimum uniform plate weight. . Do not use plate clamps to lift loads less than 20 percent of rated capacity. Designed for lifting plate material in a vertical position. Not designed to use on stainless steel or aluminum plates.

 

CM 92500 Vertical Plate Clamp 1100 lb Capacity 0 to 58

CM 92500 Vertical Plate Clamp, 1100 lb. Capacity, 0″ to 5/8″

CM 92500 Vertical Plate Clamp, 1100 lb. Capacity, 0″ to 5/8″ - Used on all hot rolled structural steel plates and sections up to a surface hardness of 300 brinell (32hrc). 0 to 5/8 inch jaw capacity. Lifts plates from horizontal to vertical position and vice versa through 180º. Clamp has serrated teeth and will mark plate. 1,100 pound working load limit.

 

i-Lift Equipment ICDH2 Vertical Plate Clamp with Lock Handle 4400 lb Working Load Limit

i-Lift Equipment ICDH2 Vertical Plate Clamp with Lock Handle, 4400 lb Working Load Limit

i-Lift Equipment ICDH2 Vertical Plate Clamp with Lock Handle, 4400 lb Working Load Limit - Standard design clamp for vertical lifting of steel plates and structures. Safety mechanism on clamps ensuring clamp does not slip. Lock for both closed and open positions of the clamp. Manufactured with high quality carbon steel. High-frequency quenching of die-forged special alloy steel offers greater durability.

 

All Material Handling PCUA010 Universal Plate Lifting Clamp 1 Tons 34 Plate Thickness

All Material Handling PCUA010 Universal Plate Lifting Clamp, 1 Tons, 3/4″ Plate Thickness

All Material Handling PCUA010 Universal Plate Lifting Clamp, 1 Tons, 3/4″ Plate Thickness - 180° turning range for easy positioning or transfer of plates. Individually serialized and tested to 2 x wll. Lever insures pre-tensioning and release of grip jaws. All steel body for durable strength in a smaller size. For use with materials having surface hardness < hbc 38.

 

Terrier 5 Ton Horizontal Plate Clamp FHSX WLL 11000 lbs Jaw-Opening 0-394

Terrier 5 Ton Horizontal Plate Clamp (FHSX) WLL 11,000 lbs. Jaw-Opening 0-3.94″

Terrier 5 Ton Horizontal Plate Clamp (FHSX) WLL 11,000 lbs. Jaw-Opening 0-3.94″ - For horizontal lifting and transporting of steel plates. The compact shape and relative light weight with a high lifting capacity. Model 10 fhsx. The terrier fhx/fhsx lifting clamps must always be used in pairs (or multiples therof). Jaw opening 0″ to 4″.

 

AUTOTOOLHOME Suction Plate Vise Holder Bench Adjustable Clamp Rubber Suction Base for Dremel

AUTOTOOLHOME Suction Plate Vise Holder Bench Adjustable Clamp Rubber Suction Base for Dremel

AUTOTOOLHOME Suction Plate Vise Holder Bench Adjustable Clamp Rubber Suction Base for Dremel - Ideal for hobby use around the home or take it anywhere. Made of aluminum material, durable for use. The vise has a powerful suction mechanism that securely attaches on tiles, glass, marble and other smooth surface, adjustable and convenient to use. The swivel-head can be positioned in just about any configuration and locks in place with a high torque lock-ring. A great handy tool to fix the circuit board for electric maintenance.

 

Terrier 1 Ton Vertical Plate Clamp TSE WLL - 2200 lbs Jaw-Opening 0 - 98

Terrier 1 Ton Vertical Plate Clamp (TSE) WLL – 2,200 lbs. Jaw-Opening 0″ – .98″

Terrier 1 Ton Vertical Plate Clamp (TSE) WLL – 2,200 lbs. Jaw-Opening 0″ – .98″ - The ts/sts lifting clamps are equipped with a safety mechanism, ensuring the clamp does not slip when lifting force is applied and when load is being lowered. Jaw opening 0″ to 1″. For vertical lifting and transporting of steel plates and structures. The clamp is locked in closed as well as in open position. Model 1 tse.

 

ChimFit 6 Flexible Flue Liner Installation Kit 1 With Top Plate Clamp - For Chimney Stack No Pot Installation by ChimFit

ChimFit 6 Flexible Flue Liner Installation Kit 1 With Top Plate & Clamp – For Chimney Stack (No Pot) Installation by ChimFit

ChimFit 6 Flexible Flue Liner Installation Kit 1 With Top Plate & Clamp – For Chimney Stack (No Pot) Installation by ChimFit - Chimfit 6 flexible flue liner installation kit 1 with top plate & clamp, for chimney stack (no pot) installation. Extra-large padded clamp face evenly distributes clamping force. Work with kreg clamp table, clamp plates, clamp trak, universal clamp trak kits.

 

Campbell 6501010 Replacement CamPad Kit for 3 ton SAC Plate Clamp Pack of 1

Campbell 6501010 Replacement Cam/Pad Kit for 3 ton SAC Plate Clamp (Pack of 1)

Campbell 6501010 Replacement Cam/Pad Kit for 3 ton SAC Plate Clamp (Pack of 1) - 3 tons [max]. 193-6501010 features -capacity wt. -price is for 1 each. 8 pounds. Dimensions overall product weight -0.