Hard-to-Find Fastener 014973230746 Carriage Bolts, 5/16-18 x 3/4-Inch, 100-Piece
- We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. We also sell coated and stainless products for additional rust resistance. Not all fasteners are applicable for all applications so be certain to test thouroughly and get the opinion of a licensed building or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person. We stock a wide variety of fasteners ideal for many applications arround the home, farm, business, automotives, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finsh.
5/8″ x 10″ Hot Dipped Galvanized Carriage Bolt w/Nuts & Flat Washers, Quantity 25 – by Fastener Depot, LLC
- Used whenever a smooth finish surface is needed so that nothing becomes snagged on the fastener. Galvanized finish allows for greater corrosion resistance. Carriage bolts are designed to fasten a wooden face to either wood or metal. Push into a hole the same size as the shank and then hammered in the rest of the way, where the square shoulder locks it firmly in place eliminating the need for a washer.
Stainless 5/16-18 x 1-1/4″ Carriage Bolt (1″ to 5″ Lengths Available in Listing), 18-8 Stainless Steel,25 Pieces (5/16-18×1-1/4)
- The head of a carriage bolt is usually a shallow dome. The squared section is of the same size as the diameter of the bolt shank, with a plain unthreaded shank. It is distinguished from other bolts by its shallow mushroom head and that the shank cross-section of the bolt is circular for most of its length, as usual, but the portion immediately beneath the head is formed into a square section. This allows the fastener to be installed with only a single tool, a spanner or wrench, working from one side. Carriage bolts were developed for use through iron strengthening plates on either side of a wooden beam. This makes the bolt self-locking when placed through a square hole in a metal strap, or a round hole in most wood. A carriage bolt, coach bolt or round head square neck bolt is a form of bolt used to fasten metal to wood. It is commonplace though to use them to bare timber, the squared section giving enough grip to prevent rotation.
(25) 1/2″ – 13 x 6″ 304 Stainless Steel Carriage Bolts
- 1/2″-13 x 6″ carriage head bolts 304 stainless steel ‘. Hot dipped galvanized finish. Superior corrosion resistance. 6″ of thread. Grade a.
1/4″-20 x 1 1/4″ (FT) Coarse Thread Grade 5 Carriage Bolt Medium Carbon Steel Black Oxide Pk 50
- All asmc industrial fasteners are guaranteed to be of the highest quality and are fully traceable and lot-controlled. Asmc industrial offers a comprehensive selection industrial, automotive, and construction fasteners our parts are high-quality, at low prices, shipped from stock we also feature a full line of usa-made fasteners, including grade 5 and grade 8 hex cap screws, sockets, stainless products, nuts, and washers. Please see the specifications in the table below for full details if you have any questions or doubts, or if your requirements include specific dimensions, please contact us prior to placing your order. Pictures are representative of item, but are not of the actual item product dimensions, finish, head markings, thread length, stamping shape or forging shape, etc, may differ from picture products are guaranteed to meet the specifications to which they are manufactured specifications allow for tolerances in dimension and shape, which can vary from lot to lot.
Hard-to-Find Fastener 014973178642 Carriage Bolts, 3/16-24 x 3/4, Piece-12
- We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. We also sell coated and stainless products for additional rust resistance. Not all fasteners are applicable for all applications so be certain to test thouroughly and get the opinion of a licensed building or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finsh. We stock a wide variety of fasteners ideal for many applications arround the home, farm, business, automotives, and in industry.
Hillman 812521 1/4X3-1/2 Carriage Bolt, 1/4 x 3-1/2-Inch
- Galvanized finish is perfect for rust prevention. Carriage bolts are designed to fasten a wooden face to either wood or metal. Square underside of the head is self locking to eliminate the need for a driving tool. Flat head provides a semi-flush finish to applications. The heads is designed to eliminate the need for a washer.
1/2″-13 x 8″ Hot Dipped Galvanized Carriage Bolt w/Nuts & Flat Washers, Quantity 25 – by Fastener Depot, LLC
- Carriage bolts are designed to fasten a wooden face to either wood or metal. Push into a hole the same size as the shank and then hammered in the rest of the way, where the square shoulder locks it firmly in place eliminating the need for a washer. Used whenever a smooth finish surface is needed so that nothing becomes snagged on the fastener. Galvanized finish allows for greater corrosion resistance.
Prime-Line 9062849 Carriage Bolts, 5/16 in.-18 X 1 in., Grade 18-8 Stainless Steel, 15-Pack
- Often used in cases where a protruding bolt head could cause injury. Features a smooth rounded head as opposed to a standard hex head. Square shoulder allows for nut to be tightened or loosened. Size 5/16 inch-18 x 1 inch. Nuts and washers not included, ensure washers and nuts are same diameter.
5/16″-18 x 2-1/2″ Hot Dipped Galvanized Carriage Bolt w/Nuts & Flat Washers, Full Thread, Grade A, Quantity 100 – by Fastener Depot, LLC
- Used whenever a smooth finish surface is needed so that nothing becomes snagged on the fastener. Push into a hole the same size as the shank and then hammered in the rest of the way, where the square shoulder locks it firmly in place eliminating the need for a washer. Galvanized finish allows for greater corrosion resistance. Carriage bolts are designed to fasten a wooden face to either wood or metal.
Hard-to-Find Fastener 014973230487 Carriage Bolts, 1/4-20 x 2-Inch, 100-Piece
- Most of our fasteners have a light zinc plating over steel giving a more rust resistant finish. We stock a wide variety of fasteners ideal for many applications around the home, farm, business, automotive, and in industry. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thoroughly and get the opinion of a licensed building or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person. Midwest carriage bolt, 1/4-20 thread, 2 in overall length, nc thread, zinc plated.
Hillman 240183 Carriage Bolt, 3/8 x 4-1/2-Inch, Steel, Zinc-Plated, Silver, 50-Pack
- Zinc finish provides a beautiful, consistent finish. Square underside of the head is self locking to eliminate the need for a driving tool. Carriage bolts are designed to fasten a wooden face to either wood or metal. The heads is designed to eliminate the need for a washer. Flat head provides a semi-flush finish to applications.
Dock Hardware 1/2″ x 3″ Galvanized Carriage Bolt Set (Pack of 8)
- The set includes (8) 1/2″ x 3″ carriage bolts, (8) washers, and (8) nuts. Includes (8) sets of carriage bolts. Manufactured using galvanized steel to ensure quality and durability. These carriage bolts measure 1/2″ x 3″. These bolts work seamlessly with most dock hardware products.
Black Carriage Bolts 5/16in x 1-1/4in (100 Count) Includes Nuts
- Product is 125 inches long, making it useful for items that need 1 1/4″ bolts. Use for securing chain link fence parts such as tension bands, brace bands, and rail ends. These are painted black for use with either galvanized or powder coated parts that need to be fastened securely. Carriage bolt 5/16in x 1-1/4in galvanized (100 count) includes nuts.
Hillman 812635 1/2X10 Carriage Bolt, 1/2 x 10-Inch, 25
- Galvanized finish is perfect for rust prevention. Carriage bolts are designed to fasten a wooden face to either wood or metal. The heads is designed to eliminate the need for a washer. Square underside of the head is self locking to eliminate the need for a driving tool. Flat head provides a semi-flush finish to applications.
National Hardware N280-859 V7652 Flat Head Carriage Bolts and Nuts in Zinc plated, 12 pack
- V7652, 12 pack, zinc plated flat head carriage bolts & nuts, 1/4″ diameter x 20 threads per inch x 1-3/4″ length, use on wood or hole in steel, prevents spinning during installation & tightening, tighten without being on both sides of the door, specifically used on wood or steel garage doors, carded.
1/2″-13 x 6-1/2″ Hot Dipped Galvanized Carriage Bolt w/Nuts & Flat Washers, Quantity 25 – by Fastener Depot, LLC
- Carriage bolts are designed to fasten a wooden face to either wood or metal. Galvanized finish allows for greater corrosion resistance. Used whenever a smooth finish surface is needed so that nothing becomes snagged on the fastener. Push into a hole the same size as the shank and then hammered in the rest of the way, where the square shoulder locks it firmly in place eliminating the need for a washer.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
