Kyocera S25H-SVNR12 Steel Boring Bar 1.181in Minimum Bore Diameter N/A OAL S…SVN Toolholder Style Right Hand Screw Holding
- This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. S25h-svnr12 steel boring bar, 1181in minimum bore diameter, n/a overall length. Lead angle n/a degrees, rake angle n/a, multi-use application n/a. Ssvn toolholder style, n/a maximum bore depth, 10000in shank, right hand. Through coolant no, insert holding method screw, rake n/a.
Anytime Tools 1/4″ C6 Carbide Insert for Indexable Lathe Toolholder TCMT090204, 5-Pack
- Features iso spec tcmt 090204 fit our 1/4″ indexable toolholders made of c6 carbide. C6 carbide with chip breaker. C6 carbide indexable lathe bit inserts inserts can be rotated to a new cutting edge without changing the position of the tool holder (each has three sides).
ALORIS #1 Turning & Facing Holder – Model .: CA1 SERIES: #1 Style: Turning & Facing Holder OVERALL HEIGHT OF TOOLHOLDER: 2-1/2″
- Turning and facing tools can be locked in together. Takes various sizes of bits.
PHASE II #2 Boring, Turning & Facing Holder – Model .: 250-202 SERIES: #2 OVERALL HEIGHT OF TOOLHOLDER: 1-3/4″ Tool Bit 1/4″ – 5/8″ Maximum Boring Bar Diameter: 1/2″ Height To Top Of Tool Bar: 1-1/8″
- Completely sealed for maintenance-free operation. Increases productivity of all lathe operations. All working parts hardened and ground. Change tools in seconds no time wasted with shims. Maximum rigidity for chatter-free performance.
Dorian Tool D1 Square Shank Chromium Molybdenum Alloy Steel Quick Change Turning and Facing Toolholder for SDN40CA Super Quick Change Tool Post, 1″ – 1-1/4″ Tool Capacity, 4-1/2″ Width, 1-3/4″ Height
- Quick change mounting. High tensile strength chromium molybdenum alloy steel. Cnc precision ground and qualified for accuracy and super precise tool change repeatability within 00001″. Applicable for holds square shank tools, turning and facing, threading and grooving, cut-off applications. Thru hardened, ion-nitrided, and black oxide coated.
New Collet Chucks Precision Er11 Extension Rod Toolholder CNC Mill
- Material special quality steel,high hardness. Diameter16mm,overall length 35mm,including the length of the threaded portion. Note for the accuracy of concentricity of the sleeve itself, to reach the inner 001-0015mmbut th. Shaft hole diamter8mm,tolerance -002mm (actual 798mm)it requires heating when installating. Chuck hole er11 standard taper holes correct installation can be achieved using precisionultimate.
Huot SuperScoot Cart for 50 Taper Toolholders
- Two-shelf storage cart has compartments for 52 cnc 50 taper toolholders. Made in usa. Made of 12-gauge steel with a phosphate undercoating and gold powder coating for durability. Lower shelf is angled for access to tools from either side. Heavy duty locking casters are load rated at 1,600 lb for stability and strength.
Kyocera S08M-SVJBR2 Steel Boring Bar 0.62in Minimum Bore Diameter 6in OAL S…SVJB Toolholder Style Right Hand Screw Holding 52 Degrees Lead Angle
- This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Ssvjb toolholder style, 12500in maximum bore depth, 05000in shank, right hand. S08m-svjbr2 steel boring bar, 062in minimum bore diameter, 6in overall length. Lead angle 52 degrees, rake angle 0 (axial), multi-use application facing, internal spherical machining. Through coolant no, insert holding method screw, rake neutral (axial).
PHASE II #4 Heavy Duty Boring Bar Holder – Model .: 250-304 SERIES: #3 OVERALL HEIGHT OF TOOLHOLDER: 2″ Inside Diameter Of Bushing: 3/4″ Height From Bottom Of Toolholder To Center: 1″ Bore Size: 1″
- Completely sealed for maintenance-free operation. Maximum rigidity for chatter-free performance. All working parts hardened and ground. Change tools in seconds no time wasted with shims. Increases productivity of all lathe operations.
Dorian Tool D1 Square Shank Chromium Molybdenum Alloy Steel Quick Change Turning and Facing Toolholder for SDN35CXA Super Quick Change Tool Post, 3/4″ – 1″ Tool Capacity, 3-3/4″ Width, 1-1/2″ Height
- High tensile strength chromium molybdenum alloy steel. Thru hardened, ion-nitrided, and black oxide coated. Cnc precision ground and qualified for accuracy and super precise tool change repeatability within 00001″. Quick change mounting. Applicable for holds square shank tools, turning and facing, threading and grooving, cut-off applications.
Anvil, Toolholder SER1000M27
- Increases productivity of all lathe operations. Completely sealed for maintenance-free operation. All working parts hardened and ground. Change tools in seconds no time wasted with shims. Maximum rigidity for chatter-free performance.
Kyocera A25R-DCLNL12-32 Steel Boring Bar 1.2598in Minimum Bore Diameter 7.874in OAL A-DCLN Toolholder Style Left Hand Clamp/Screw Holding 5 Degrees Lead Angle
- Through coolant yes, insert holding method clamp/screw, rake negative (axial), negative (radial). This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Lead angle 5 degrees, rake angle -6 (axial), -11 (radial), multi-use application internal facing. A25r-dclnl12-32 steel boring bar, 12598in minimum bore diameter, 7874in overall length. A-dcln toolholder style, 16535in maximum bore depth, 09843in shank, left hand.
Dorian Tool DSTSCH-050 Heavy Duty Smart Tool Setter, For CAT/ISO/BT-50 Toolholders
- Large tools can be mounted or removed with the smart tool-setter. . Endmills can be easily, quickly, and precisely set with the smart tool-setter. The smart tool-setter’s precise and heavy duty construction make the tool-setter very rigid and able to endure extreme forces without causing any damage to tools or the smart tool-setter. Pull studs can be quickly and easily changed using the smart tool-setter. The multi-functioning and positioning of the smart tool-setter allow the operator to switch quickly and easily from one operation to another without loss of time.
Huot SuperScoot Cart for 40 Taper Toolholders
- Two-shelf storage cart has compartments for 90 cnc 40 taper toolholders. Heavy duty locking casters are load rated at 1,600 lb for stability and strength. Lower shelf is angled for access to tools from either side. Made of 12-gauge steel with a phosphate undercoating and gold powder coating for durability. Made in usa.
Beta C57P R Panel Toolholder Mastercargo Red
- To mould an idea, encourage it to its final outcome and after that better it still, beta works daily, in close contact with end users, researching materials, design and constant improvement. Research, development and quality. The ciceri family began producing tools in northern italy in the 1880s. Scrupulous control on each tool ensures its invariable quality. Today, family owned beta, or beta utensili is known for its direct involvement in grand prix racing, a relationship that dates back to the early 1970s. Beta utensili is a leading company in the production and sales of professional hand tools. Accuracy, precision, rigor, quality, courage, style, consistency and innovation. While nothing is perfect, we’re practicing.
Talon Pegboard Toolholders 6-Pc. Large Pegs Variety Pack
- These nylon holders stay put, allowing you to take tools down without having holders fall off, and they’re virtually unbreakable, too six-piece large pegs variety pack includes two 3-5/8″ straight holders (style a), two dual screwdriver holders (style f) and two pliers holders (style g). Fit 1/4″ pegboard holes. All feature easy, tool-free mounting. To remove use a phillips screwdriver.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
