26 Aug 2017
Top 13 Best Quick Change Extensions
Southwire Tools & Equipment FQCE36 Flexible Quick Change Drill Bit Extension - For use with up to 3/4″ short auger bit. Flexible quick connect extension. Allows for extenstion of drill bits.
IRWIN Tools 1882442 Impact Performance Series Irwin Quick Change Extension, 1/4-Inch Shank, 2 1/2-Inch Length - Patented jaw design is compatible with all 1/4″ hex shank accessories including insert bits. 1/4″ quick-change shank is designed to work with impact drivers, and reduces slipping in standard drill chucks. Built for maximum durability and long life with impact drivers. Black oxide finish resists corrosion and increases life of extension. Large chuck withstands higher torque demands of impact drills.
Snappy 4 in. Hex Quick Change Chuck Drill Bit Holder Extension fits 1/4 Impact MADE in USA - Tools are locked into the drive channel with a uniquely-formed, tempered spring. Extend the reach of your drill with a snappy® quick change extension chuck. 4″ extension chuck will fit into small spaces or tight against another object. Accepts 1/4″ hex inserts bits in addition to 1/4″ hex power bits.
Irwin Lock-n-Load Quick Change Extension Bit Holder 300mm 1/4in - Irwin lock-n-load quick change extension bit holderspecifications insert bit standard 1/4 in. Draper, sealey, bahco, stanley and much more. Best brands at best prices. Uk’s no 1 hand and power tool seller.
Insty-Bit Quick Change Extension 12” - Only chuck that holds all screwdriver bits 1″ and longer. Positive action doesn’t let go until you want it to. Replaces all magnetic and non-magnetic bit holders. The 12″ extension allows most people to reach an 8′ ceiling without a ladder, and you can even line them all up for 21″ of reach not for use with impact tools. True one-handed operation, simply push the bit into the chuck. Just pop any of your existing 1/4″ hex-shank drill bits or driver bits into one of these extensions. Will accept any 1/4″ (6 mm) hex shank accessory, with or without a power groove. Chuck’s small 5/8″ diameter fits through slim holes for increased versatility. Only chuck that accepts all standards, ansi, jis and din. Can’t quite fit your drill into that narrow space no need to get a whole new set of long bits. Works in all corded and cordless drills. Fits all keyed and keyless chucks. Each extension includes a 1″ #1 plain hex phillips bit and a 2″ #2 power groove phillips bit. Ideal for use with high speed drill bits, spade bits, hole saws, screwdriver bits and all 1/4″ hex shank power tool accessories. Quick change hex-shank and hardened extensions optimize drill torque. Patented all-hex design holds bits tight, even when removing bits from holes. Black oxide finish with plated steel chuck give excellent corrosion resistance.
Insty-Bit® Quick Change Extension 6″ - Chuck’s small 5/8″ diameter fits through slim holes for increased versatility. Ideal for use with high speed drill bits, spade bits, hole saws, screwdriver bits and all 1/4″ hex shank power tool accessories. Each extension includes a 1″ #1 plain hex phillips bit and a 2″ #2 power groove phillips bit. Will accept any 1/4″ (6 mm) hex shank accessory, with or without a power groove. True one-handed operation, simply push the bit into the chuck. Quick change hex-shank and hardened extensions optimize drill torque. Just pop any of your existing 1/4″ hex-shank drill bits or driver bits into one of these extensions. Only chuck that holds all screwdriver bits 1″ and longer. The 12″ extension allows most people to reach an 8′ ceiling without a ladder, and you can even line them all up for 21″ of reach not for use with impact tools. Works in all corded and cordless drills. Only chuck that accepts all standards, ansi, jis and din. Patented all-hex design holds bits tight, even when removing bits from holes. Positive action doesn’t let go until you want it to. Can’t quite fit your drill into that narrow space no need to get a whole new set of long bits. Replaces all magnetic and non-magnetic bit holders. Fits all keyed and keyless chucks. Black oxide finish with plated steel chuck give excellent corrosion resistance.
Irwin Tools 4935653 Lock-n-Load Quick Change Extension, 12 by Irwin Tools - Lock-n-load quick change extensionscarbon steel construction sleeve and body for durability and lifelock-n-load system for one-handed quick releasepatented jaw design holds bits securely on 6-flatted shanks, as well as ball detent bits1/4 quick change range now holds insert bits magnetic for holding.
Generic YCUS150720-091 rew Tiper 1/4 Hex 1/4 Hex Shank 2″ 4″ 6″ 3pc Magnetic Bit Quick Change Extensions Holder Screw Tip 3pc Magneti - Description 3pc magnetic bit extensions magnetized ends hold bits securely for hard to reach screws and nuts hex shank chucks firmly into drills useful in hand-held drivers accepts any 1/4″ hex bits includes (1) 2¡± extension (1) 4¡± extension (1) 6¡± extension.
Extension 12 Inch For 3/8 Inch Quick Change Bit - . Lock-n-load quick change extensions features carbon steel construction sleeve and body for durability and life lock-n-load system for one-handed quick release patented jaw design holds bits securely on 6-flatted shanks, as well as ball detent bits 1/4 inch quick change range now holds insert bits magnetic for holding.
Irwin Lock-n-Load Quick Change Extension Bit Holder 150mm 1/4in - Best brands at best prices. Draper, sealey, bahco, stanley and much more. Uk’s no 1 hand and power tool seller. Irwin lock-n-load quick change extension bit holderspecifications insert bit standard 1/4 in.
Kempston 88019 Quick Change Extension Sys Kit - For use when drilling between studs and joists and pulling pull wire through them with the kit conveniently create the right length for the job 18 ” or 36 “sections for different size combinations. Use with any type of bit with a 1/4″ quick change hex such as spade bits or auger bits, drill bits. Kempston patent pending quick connect extension and installation kit can quickly and easily switch from drilling to pulling with the quick change pulling grip.
Irwin 4X Blue Groove Quick Change Extension 150Mm - Uk’s no 1 hand and power tool seller. Draper, sealey, bahco, stanley and much more. The irwin irw10502825 4x blue groove quick change extension comes in the followingsize 150mm. Best brands at best prices.
Maxtech 50361MX Impact Zone Quick Change Extension, 12″ - One-handed loading and ejection load and eject with a drill still in your hand. Universal 1/4″ hex shank. Ball-bearing lock mechanism for extreme durability during high torque will not seize up or break when impact is engaged. Impact-rated construction withstands high degrees of torque during drilling.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.