Coolest 24 Router Plates in 2019

 

Woodhaven 8395 Offset Router Plate for Full Size Routers - Handy for full size router use when edge routing plate size approx 6-5/8″ wide x 12″ long. Fits fixed base of porter cable 690 & 892, bosch 1617-1618, dewalt dw616-618, makita rf1101, hitachi m12vc and milwaukee 5615 & 5616 also fits base of other routers with a porter cable type three hole bolt pattern router not included. Lifetime guarantee against defects in material or workmanship made in the usa. Large 366″ bit hole allows maxium visibility. Includes 8-32 & 10-24 mounting screws.

 

Premium Phenolic Router Plate 9-1/4″ x 11-3/4″ By Peachtree Woodworking PW3054 - Unique cam adjusters to insure a perfect fit in your router table. Threaded allen wrench inserts in each corner for leveling and adjustments. Snap out rings for openings of 3 7/8″, 2 5/8″ & 1 1/4″. Phenolic 318″ (approx) thick router plate. Includes a shoulder pin for freehand work.

 

POWERTEC 71022 6-1/2-Inch Universal Router Plate - Convenient and efficient centering pin for accurate and secure positioning of the plate to your router. Predrilled holes are compatible with virtually all the standard routers on the market and accept porter cable style guide bushings. Diameter is 6-1/2-inch wide. Quick and easy to mount. Clear acrylic plate assures optimum visibility.

 

Woodpeckers Precision Woodworking Tools AI690890 Router Mounting Plate - A pair of adjustable edge plungers enable you to eliminate any slop between the router plate and the plate opening. Strong, stiff and smooth made from cast, precision machined aluminum. Easy, exact leveling getting this plate exactly level is easy thanks to 8 top accessible fine-pitch leveling set screws. Multiple starting pin locations and 3 twist-lock rings and a locking wrench included with each router plate. Cast aluminum router mounting plate for porter cable 690/890, 7529, 8529, makita 1101, bosch 1617, 1618, and dewalt 618 and 616 routers.

 

3-Piece Blank Router Plate Insert Rings - . Blank insert rings can be drilled or routed for a custom size. Each ring is molded of abs reinforced with polycarbonate.

 

DELUXE ROUTER BASE PLATE By Peachtree Woodworking – PW1075 - Snap out rings allow for openings of 3-1/8″, 2-5/8″ and 1-1/4″. Allen wrench inserts in each corner to help level & adjust the router insert with your table. Includes a shoulder pin for freehand work and magnets to hold the insert into your router table. Large 9″ x 12″ x 3/8″ (1/4″ lip) design accommodates heavy routers.

 

MLCS 9580 Phenolic Router Table Top, X1 Fence and Aluminum Insert Plate - The x1 fence is included. The top measures 3/4″ thick x 24″ x 32″ and is designed to use mlcs router plates (9‑1/32″ x 12‑3/32″) and the u‑turn lift system. Adjustments are made using locking knobs, no tools needed the core of the x1 is anodized aluminum, with available t-slots to mount a stop block or almost any jig or accessory. The top choice for many industrial wood working shops. It is designed with a two track mounting system with adjustable rulers so you can set the fence to zero and make repetitive movements. The x1 dust port is designed to accept a 2-1/4″ or 2-1/2″ vacuum hose with very smooth action, repetitive movements, adjustable fence faces, open t-track, rulers, 2 offset bars, dust collection and a safety guard, the x1 fence has it all. They’re stored in the the fence for easy access when needed. The x1 “top mounted” ruler ensures that repetitive cuts or setting your stop block can be done with ease. The x1 includes two 1/32″ x 1/16″ space bars, which offset the fence face, either 1/32″ or 1/16″. Standing 4″ tall, this fence mounts to any table that is 1/2″ to 1‑1/2″ thick and from 24″ to 32″ wide. The removable and fully adjustable fence faces are made of melamine coated heavy-duty mdf and fully edge banded for low friction and long life. Deluxe double t-track is installed in the table with one slot for 1/4″ hex head bolts, and a second standard 3/4″ miter slot for use with most miter gauges and jigs. Made from solid phenolic “mineral resin” material, known for its strength, impact and wear resistance and stability in any shop environment. Available separately, or with fence, plate and stand combos.

 

Rockler Router Plate Insert With 2-1/2 inch Opening For Standard Plates - 5 weight (lbs) 0. 0600 . Opening 2-1/2″ outer diameter 4″manufacturer part number tarti-2.

 

Triton MOF001 2-1/4hp, Kreg Bench Top Router Table & Router Table Insert Plate - Micro winder enables continuous fine depth adjustment through the full plunge range. Three-stage turret with direct reading scales for precise preset cut depths / multi-function fence provides excellent control for handheld use and circle cutting. Single button switches from conventional plunge to fixed-base router with rack & pinion mode. Through base, single wrench bit change is achieved with automatic spindle lock. Soft start and variable speed provides the perfect speed for all cutter types / side air vents reduce intake of dust into the motor casing when mounted upside-down.

 

Woodpeckers Precision Woodworking Tools AI7518 Router Mounting Plate - Easy, exact leveling getting this plate exactly level is easy thanks to 8 top accessible fine-pitch leveling set screws. Multiple starting pin locations and 3 twist-lock rings and a locking wrench included with each router plate. Strong, stiff and smooth made from cast, precision machined aluminum. Cast aluminum pre-drilled for porter cable 7518 and 7539 routers. A pair of adjustable edge plungers enable you to eliminate any slop between the router plate and the plate opening.

 

Guide Bushing Router Plate - A pair of adjustable edge plungers enable you to eliminate any slop between the router plate and the plate opening. Cast aluminum pre-drilled for triton models jof-001, mof-001, trc-001 and tra-001 routers. Strong, stiff and smooth made from cast, precision machined aluminum. Easy, exact leveling getting this plate exactly level is easy thanks to 8 top accessible fine-pitch leveling set screws. Multiple starting pin locations and 3 twist-lock rings and a locking wrench included with each router plate.

 

5MM ROUTER BASE PLATE CENTERING SYSTEM - Your router plate should be the standard 1-3/8″ recessed hole that accepts porter cable style bushing. Makita 3601-360 ryobi 150-151. This screw size may fit other routers not listed be sure to check your router base screw size. Screw size m5. Fits elu 3304, hitachi tr12-m12v.

 

Router Base Plate with Centering Pin - This set-up is an absolute must for precision operation of dovetail jigs fits the following models sears models 315. Complete with screws and installation instructions. 275 000-100-110, 315. 175 070-040-050-060 ryobimakita 3612 and 3621 milwaukee 1615/1616/1619 series, hitachibosch 1615 and 1617/1618 series, dewalt dw616/618 series, dw621, and dw625, fein ft-1800 elu 177porter cable 690 series, 7529, and 8529 freud ft2000e. Simply install a porter-cable style guide, use the centering pin to line-up the base plate concentric to the collet, install your bit, and rest assured your bit is following the path the template or jig intended. Frustrated by a router with a base plate that uses a limited range of hard to find guide bushings even worse is one that offers no means to center those guides once they are installed. This unit is not only pre-drilled for all the routers listed below, it also includes a cleverly designed centering pin that centers the guide to the router collet.

 

Premium Aluminum Router Plate 9-1/4″ x 11-3/4″ By Peachtree Woodworking PW3054 - Aluminum precision machined to 318″ (approx) thick router plate. Threaded allen wrench inserts in each corner for leveling and adjustments. Snap out rings for openings of 3 7/8″, 2 5/8″ & 1 1/4″. Includes a shoulder pin for freehand work. Unique cam adjusters to insure a perfect fit in your router table.

 

CONTRACTOR ROUTER PLATE by E. EMERSON TOOL CO. MfrPartNo XCRP - Fits routers with up to a 6” diameter base. Router plate rail fits into recessed track on the contractor straight edge clamping tool guides. Router plate tracks along the all-in-one straight edge clamping tool guide eliminating router kick for a smooth cut. Predrilled with a variety of hole patterns to accommodate most routers.

 

Router Plate Leveling and Locking Hardware Pack (for Custom Router Table Tops) - 1500 . Manufacturer part number 22994 weight (lbs) 0.

 

MLCS 9334 1/4-Inch Thick Aluminum Router Plate - Our 1/4″ thick aluminum router table insert will support the heaviest of routers, without plate sag. Pre-marked mounting hole indentations provided for most popular routers. The steel starter pin is for routing curved pieces. (The plate is not pre-drilled). Includes three separate insert rings with attaching screws which provide opening sizes (3-1/4″, 1-7/16″, 1-3/16″ for template guides and a blank insert ring to create your own size). The plate is about 9″ x 12″ and includes leveling screws and magnets to secure the plate in the table.

 

Woodhaven 99 Router Plate Template - Optional 25204 flush trim bit with a shank mounted pilot bearing works great with this template. 1/4″ thick mdf, instructions included. Not as accurate as us machining the plate opening on our cnc machinery, but it’s the next best thing. Use this template to cut a rabbeted table plate opening, or a through table opening to use with our 9-1/4″ x 11-3/4″ router plate & levelers.

 

MLCS 9098 OnPoint Version 2.0 Universal Laser Guided Router Plate - Mlcs quality guaranteed. New built-in led lights clearly illuminate your work area. Laser guided for pinpoint accuracy. Now pre-drilled for common router models.

 

Kreg PRS3040 Precision Router Table Insert Plate Levelers - Item is manufactured in united states. This product is easy to use easy to install and highly durable. These precision router insert plate levelers are for the t20365 kreg precision benchtop router table.

 

MLCS 9338 All-In-one Router Plate Kit - The plate is approximately 9″ x 12″ with pre-drilled table mounting holes. 2 removable rings give three different bit openings (3-7/8″, 2-5/8″, 1-3/16″). Also includes concentric rings on bottom of plate for easy alignment when installing your router. 3/8″ thick phenolic router plate supports any router. Note 1-3/16″ opening is designed to hold porter cable (r) style guide bushings. Includes magnets and adjusting screws for securing and leveling the plate. The steel starting guide pin allows routing curved work.

 

XRP 8-Inch by 9-Inch Router Plate, Black - Router plate tracks along the all-in-one straight edge clamping tool guide eliminating router kick for a smooth cut. Router plate rail fits over raised t-track on the a, twin, and ultra series clamps. Predrilled with a variety of hole patterns to accommodate most routers. Fits routers with up to a 6” diameter base.

 

Hart Design Router Plate - Aluminum 12″ x 9″ router inserts with removable rings that allow 3 different size openings. Fence stores on 2 hooks under the router table when not in use. New features extra tall split fence, aluminum miter track and safety guard. New durable plastic safety guard helps protect eyes.

 

Rockler Router Plate Insert With 1-1/2″ Opening For Standard Plates - Snap out rings for openings of 3 7/8″, 2 5/8″ & 1 1/4″. Includes a shoulder pin for freehand work. Unique cam adjusters to insure a perfect fit in your router table. Aluminum precision machined to 318″ (approx) thick router plate. Threaded allen wrench inserts in each corner for leveling and adjustments.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.