Freud 85-027 3/4-Inch x 1/16-Inch Inlay Router Bit with 1/2-Inch Shank Style: 85-027 3/4-Inch x 1/16-Inch Inlay Router Bit with 1/2-Inch Shank Model: 85-027
- Application cuts all solid surface materials, hardwood and other composite materials. Use on hand-held portable routers. . Ideal for decorative inlay work in solid surface countertops.
Face Inlay Router Bits (solid surface) – CD 7/8 | CL 3/8 | DP 1/16 | B SBE120
- Add an sbe124 bearing and it can be used for flush trimming if needed. By southeast tool and are new and improved. Select your item(s) then click add to cart. For solid surface applications, this face inlay router bit is carbide-tipped and will provide for many years service. All bits have a 1/2 inch shank. These solid surface bits are manufactured in the usa. Legend below explains sizing.
Bosch 85654M 1/8-Inch Depth 1/2-Inch Cut Face Inlay Router Bit 1/2-Inch Shank by BOSCH
- Recommended for use with a routing tableall bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router.
Freud 85-031 3/4-Inch x 3/16-Inch Inlay Router Bit with 1/2-Inch Shank Style: 85-031 3/4-Inch x 3/16-Inch Inlay Router Bit with 1/2-Inch Shank Model: 85-031
- . Application cuts all solid surface materials, hardwood and other composite materials. Ideal for decorative inlay work in solid surface countertops. Use on hand-held portable routers.
StewMac Carbide Downcut Inlay Router Bit, 1/16″ (1.59mm) diameter
- Solid carbide lasts far longer than steel. For fine detail inlay routing. Comes in sturdy protective case, with bit cutting diamater size clearly marked. Length 1-1/2″ (3810mm), shank diameter 1/8″ (318mm). Reverse spiral flutes cut downward for cleaner, “no fuzz” edges in routed cavities.
MLCS 9177 Brass Router Inlay Kit with Router Bit
- Kit includes a brass bushing, brass template guide and brass retainer nut. A 1/8″ downcut solid carbide spiral bit (1/8″ shank with 1/4″ adaptor bushing) is also included. . Create precisely matched inlays by simply removing the bushing. Note bowtie inlay pattern is not included. This easy to use inlay kit follows a 3/16″ thick pattern template of almost any shape to produce the recess. This solid brass inlay kit will fit your porter cable®, black & decker or any router with a manufacturer supplied adaptor for porter cable® bushings.
Freud 85-023 1/2-Inch x 1/8-Inch Inlay Router Bit with 1/2-Inch Shank Style: 85-023 1/2-Inch x 1/8-Inch Inlay Router Bit with 1/2-Inch Shank Model: 85-023
- Application cuts all solid surface materials, hardwood and other composite materials. Ideal for decorative inlay work in solid surface countertops. Use on hand-held portable routers. .
StewMac Carbide Downcut Inlay Router Bit, 1/32″ (0.79mm) diameter
- Reverse spiral flutes cut downward for cleaner, “no fuzz” edges in routed cavities. Comes in sturdy protective case, with bit cutting diamater size clearly marked. Length 1-1/2″ (3810mm), shank diameter 1/8″ (318mm). Solid carbide lasts far longer than steel. For fine detail inlay routing.
Replacement Inlay Router Bit
- . Replacement router bit for the rockler inlay system (#25229, sold separately) and the inlay bushing and bit (#27593, sold separately).
Bosch 85650M 1/16-Inch Depth 1/4-Inch Cut Face Inlay Router Bit 1/2-Inch Shank
- Recommended for use with a routing table. All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router.
Bosch 85651M 1/8-Inch Depth 1/4-Inch Cut Face Inlay Router Bit 1/2-Inch Shank
- Recommended for use with a routing table. All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router.
Freud 85-015 1/4-Inch x 1/16-Inch Inlay Router Bit with 1/2-Inch Shank Style: 85-015 1/4-Inch x 1/16-Inch Inlay Router Bit with 1/2-Inch Shank Model: 85-015
- Application cuts all solid surface materials, hardwood and other composite materials. Use on hand-held portable routers. Ideal for decorative inlay work in solid surface countertops.
Bosch 85656M 1/16-Inch Depth 3/4-Inch Cut Face Inlay Router Bit 1/2-Inch Shank
- All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router. Recommended for use with a routing table.
StewMac Carbide Downcut Inlay Router Bit, 1/8″ (3.18mm) diameter
- Reverse spiral flutes cut downward for cleaner, “no fuzz” edges in routed cavities. For inlay routing and bridge saddle slots. Comes in sturdy protective case, with bit cutting diamater size clearly marked. Length 1-1/2″ (3810mm), shank diameter 1/8″ (318mm). Solid carbide lasts far longer than steel.
Freud 85-029 3/4-Inch x 1/8-Inch Inlay Router Bit with 1/2-Inch Shank Style: 85-029 3/4-Inch x 1/8-Inch Inlay Router Bit with 1/2-Inch Shank Model: 85-029
- Ideal for decorative inlay work in solid surface countertops. Application cuts all solid surface materials, hardwood and other composite materials. Use on hand-held portable routers.
Magnate 1155 Face-Inlay Router Bits – 3/8″ Cutting Height; 3″ Overall Length; 1/2″ Shank Diameter
- The cutting depth of all bits is 1/8″. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Brass. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. Excessive overall length may cause tool damage. You may try the following suggestion. Used for inlaying wood veneer, and other material i. It is also equipped with wide open gullets for easy disposal of wood chips. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. By replacing the original bearing, br-05, the rabbet depth varies as following original bearingbr-05 cutting depth matrix br-08 br-05 br-04 1/8″ 1/16″ 1/8″ 3/16″ this carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. In case a bit doesn’t come with a speed chart. E.
Magnate 1159 Face-Inlay Router Bits – 3/4″ Cutting Height; 3-1/2″ Overall Length
- Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. Excessive overall length may cause tool damage. It is suited for softwoods, hardwoods, chipboard, plywood and etc. It is also equipped with wide open gullets for easy disposal of wood chips. In case a bit doesn’t come with a speed chart. E. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. You may try the following suggestion. By replacing the original bearing, br-05, the rabbet depth varies as following original bearingbr-05 cutting depth matrix br-08 br-05 br-04 1/8″ 1/16″ 1/8″ 3/16″ this carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. Brass. Used for inlaying wood veneer, and other material i. The cutting depth of all bits is 1/8″.
Freud 85-019 1/4-Inch x 3/16-Inch Inlay Router Bit with 1/2-Inch Shank Style: 85-019 1/4-Inch x 3/16-Inch Inlay Router Bit with 1/2-Inch Shank Model: 85-019
- . Application cuts all solid surface materials, hardwood and other composite materials. Use on hand-held portable routers. Ideal for decorative inlay work in solid surface countertops.
StewMac Carbide Downcut Inlay Router Bit, 3/64″ (1.19mm) diameter
- For fine detail inlay routing. Comes in sturdy protective case, with bit cutting diamater size clearly marked. Reverse spiral flutes cut downward for cleaner, “no fuzz” edges in routed cavities. Solid carbide lasts far longer than steel. Length 1-1/2″ (3810mm), shank diameter 1/8″ (318mm).
Magnate 1173 Side Face-Inlay Router Bits – 1/4″ Cutting Height; 5″ Shank Length
- The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Used for inlaying wood veneer, and other materials i. Excessive overall length may cause tool damage. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. E. E. In case a bit doesn’t come with a speed chart. It is suited for softwoods, hardwoods, chipboard, plywood and etc. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. It is also equipped with wide open gullets for easy disposal of wood chips. Designed for the legacy ornamental mill. Brass on either spindle stock up to 8″ in diameter, or flat stock up to 4″ wide that has a curved profile i. Bow front drawer. The cutting depth of all bits is 1/8″. By replacing the original bearing, br-05, the rabbet depth varies as follows original bearingbr-05 cutting depth matrix br-08 br-05 br-04 1/8″ 1/16″ 1/8″ 3/16″ shank length is measured from middle of the knife to the end of the shank. You may try the following suggestion. It is precision ground, hardened, and tempered in order to stand up to a variety of materials.
Bosch 85658M 3/16-Inch Depth 3/4-Inch Cut Face Inlay Router Bit 1/2-Inch Shank
- All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router. Recommended for use with a routing table.
Bosch 85652M 3/16-Inch Depth 1/4-Inch Cut Face Inlay Router Bit 1/2-Inch Shank
- Recommended for use with a routing table. All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
