Barnwell Walnut Sliding Bevel 10 1/2″ (267mm) with Brass Thumbscrew Lock Made in Sheffield
- Brass machinable, ductile, corrosion resistant, excellent electrical and thermal conductivity. A thumb screw is designed to be turned using a thumb and finger.
(80 pcs) 1/4″-20 X 1″, Thumb Screws, Knurled Head with Shoulder, Brass
- Diameter (nominal) 1/4″thread pitch 20length (nominal) 1″category thumb screwssystem of measurement us unitsbrand aspen fasteners®head style knurled head with shoulderdrive style thumb drivethread length full threadthread direction right-hand threadmaterial brasscoating uncoatednb product images are copyrighted artistic representations which may not reflect the product’s exact appearance, proportions and/or relative dimensions.
10 Pack 8-32 x 3/4 Inch Threads Solid Brass Diamond Knurled Thumb Screws with Straight Shoulders Right-Hand Threads SAE Flat Tip Uncoated (8-32 x 3/4 inch Long Threads)
- The knurled surface on these thumb screws provides optimal gripping allowing the screw to be tightened and loosened by hand pressure alone eliminating the need for tools knurled head screws are common in applications requiring frequent fastening and unfastening. Specifications 8-32 threads, head diameter 4375 inches, head height 250 inches, shoulder diameter 3125 inches, shoulder height 125 inches, thread length 750 inches. Available in the following sae thread sizes 6-32, 8-32, 10-32, 1/4-20, 5/16-18 and 3/8-16. 10 pack/pieces knurled head solid brass thumb screws with straight shoulders and flat tips. Made from solid brass which is a corrosion-resistant alloy.
(150 pcs) #10-32 X 3/4″, Thumb Screws, Knurled Head with Shoulder, Brass
- Diameter (nominal) #10thread pitch 32length (nominal) 3/4″category thumb screwssystem of measurement us unitsbrand aspen fasteners®head style knurled head with shoulderdrive style thumb drivethread length full threadthread direction right-hand threadmaterial brasscoating uncoatednb product images are copyrighted artistic representations which may not reflect the product’s exact appearance, proportions and/or relative dimensions.
UNICORP THS1011-M01-F07-632 3/8″ Rnd Washer-Faced Thumb Screw 6-32 THD x 3/8″ lg Brass Nickel QTY-10
- They have an external thread with a 45-degree angle and are slightly chamfered to permit smooth entry. Unicorp’s thumb screws are installed quickly and easily. They are used in electronics assembly.
(100 pcs) 1/4″-20 X 1/2″, Thumb Screws, Knurled Head with Shoulder, Brass
- Diameter (nominal) 1/4″thread pitch 20length (nominal) 1/2″category thumb screwssystem of measurement us unitsbrand aspen fasteners®head style knurled head with shoulderdrive style thumb drivethread length full threadthread direction right-hand threadmaterial brasscoating uncoatednb product images are copyrighted artistic representations which may not reflect the product’s exact appearance, proportions and/or relative dimensions.
UNICORP THS3025-M01-F07-832 3/8″ Rnd Plain Thumb Screw 8-32 THD x 1/2″ Brass Nickel QTY-10
- They have an external thread with a 45-degree angle and are slightly chamfered to permit smooth entry. They are used in electronics assembly. Unicorp’s thumb screws are installed quickly and easily.
(200 pcs) #6-32 X 1/4″, Thumb Screws, Knurled Head with Shoulder, Brass
- Diameter (nominal) #6thread pitch 32length (nominal) 1/4″category thumb screwssystem of measurement us unitsbrand aspen fasteners®head style knurled head with shoulderdrive style thumb drivethread length full threadthread direction right-hand threadmaterial brasscoating uncoatednb product images are copyrighted artistic representations which may not reflect the product’s exact appearance, proportions and/or relative dimensions.
Barnwell Walnut Sliding Bevel 9″ (225mm) with Brass Thumbscrew Lock Made in Sheffield
- Brass machinable, ductile, corrosion resistant, excellent electrical and thermal conductivity. A thumb screw is designed to be turned using a thumb and finger.
Brass Thumb Screw, Knurled Head, 0.75″ Length, Fully Threaded, 1/4″-20 UNC Threads, Made in US (Pack of 5)
- It resists corrosion and is nonmagnetic. They come in a variety of head styles, but each includes an easy-grip head that allows for simple “by-hand” installation. Combined with a precision-machined finish, it also offers a decorative gold color for a finished look. A threaded fastener’s size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Free-machining brass, also known as alloy 360, is the most commonly used brass alloy. The thumb screw has a shoulder that provides a good bearing surface and also makes the head easier to grip. Thumb screws are designed to be tightened and loosened by hand. The head has a diamond knurl, which also offers a gripping surface and makes it easier to tighten or loosen the fastener manually.
Knurled Head Thumb Screws – Solid Brass Machine Screws #6-32 x 1/2 inch Qty 25
- These brass screws are installed with your fingers and are used to hold light covers in place and other ornamental products. The color of brass can vary from dark to light based on the zinc content more zinc content produces lighter brass. Brass knurled thumb screws are asme standards specific. Knurled head machine screws are available in solid brass. Brass is prized for its corrosion resistance, however it is quite soft so it is not suitable for all applications. Brass conducts electricity and is also a good conductor of heat. Brass is an alloy made of copper and zinc.
(200 pcs) #10-32 X 3/8″, Thumb Screws, Knurled Head with Shoulder, Brass
- Diameter (nominal) #10thread pitch 32length (nominal) 3/8″category thumb screwssystem of measurement us unitsbrand aspen fasteners®head style knurled head with shoulderdrive style thumb drivethread length full threadthread direction right-hand threadmaterial brasscoating uncoatednb product images are copyrighted artistic representations which may not reflect the product’s exact appearance, proportions and/or relative dimensions.
B&P Lamp 3/4″ Length, Unfinished Brass, 8/32 Thread Thumb Screw.
- 8/32 thread thumb screw,, 8/32 turned brass thumb screws. 8/32 turned brass thumb screws, 8/32 thread, 13/32″ head. 3/4″ length. Unfinished brass.
(200 pcs) #6-32 X 3/4″, Thumb Screws, Knurled Head with Shoulder, Brass
- Diameter (nominal) #6thread pitch 32length (nominal) 3/4″category thumb screwssystem of measurement us unitsbrand aspen fasteners®head style knurled head with shoulderdrive style thumb drivethread length full threadthread direction right-hand threadmaterial brasscoating uncoatednb product images are copyrighted artistic representations which may not reflect the product’s exact appearance, proportions and/or relative dimensions.
(150 pcs) #10-32 X 5/8″, Thumb Screws, Knurled Head with Shoulder, Brass
- Diameter (nominal) #10thread pitch 32length (nominal) 5/8″category thumb screwssystem of measurement us unitsbrand aspen fasteners®head style knurled head with shoulderdrive style thumb drivethread length full threadthread direction right-hand threadmaterial brasscoating uncoatednb product images are copyrighted artistic representations which may not reflect the product’s exact appearance, proportions and/or relative dimensions.
(150 pcs) #10-32 X 5/8″, Thumb Screws, Knurled Head with Shoulder, Brass
- Diameter (nominal) #10thread pitch 32length (nominal) 5/8″category thumb screwssystem of measurement us unitsbrand aspen fasteners®head style knurled head with shoulderdrive style thumb drivethread length full threadthread direction right-hand threadmaterial brasscoating uncoatednb product images are copyrighted artistic representations which may not reflect the product’s exact appearance, proportions and/or relative dimensions.
(100 pcs) 1/4″-20 X 3/8″, Thumb Screws, Knurled Head with Shoulder, Brass
- Diameter (nominal) 1/4″thread pitch 20length (nominal) 3/8″category thumb screwssystem of measurement us unitsbrand aspen fasteners®head style knurled head with shoulderdrive style thumb drivethread length full threadthread direction right-hand threadmaterial brasscoating uncoatednb product images are copyrighted artistic representations which may not reflect the product’s exact appearance, proportions and/or relative dimensions.
Knurled Head Thumb Screws – Solid Brass Machine Screws – #8-32 x 3/4″ Qty 25
- Brass is an alloy made of copper and zinc. Brass conducts electricity and is also a good conductor of heat. Brass is prized for its corrosion resistance, however it is quite soft so it is not suitable for all applications. The color of brass can vary from dark to light based on the zinc content more zinc content produces lighter brass. These brass screws are installed with your fingers and are used to hold light covers in place and other ornamental products. Knurled head machine screws are available in solid brass. Brass knurled thumb screws are asme standards specific.
Brass Raised Knurled Thumb Screws, Fully Threaded, 8-32 Thread x .375″ Length, 3 Pcs
- Length is measured from under the collar. Corrosion resistant in wet environments, electrically conductive, and nonmagnetic. A raised head makes them easy to grip. The head is knurled for slip-resistant controlled adjustment. Tensile strength 50,000 psi, rockwell b78.
(200 pcs) #8-32 X 1/2″, Thumb Screws, Knurled Head with Shoulder, Brass
- Diameter (nominal) #8thread pitch 32length (nominal) 1/2″category thumb screwssystem of measurement us unitsbrand aspen fasteners®head style knurled head with shoulderdrive style thumb drivethread length full threadthread direction right-hand threadmaterial brasscoating uncoatednb product images are copyrighted artistic representations which may not reflect the product’s exact appearance, proportions and/or relative dimensions.
(200 pcs) #8-32 X 1/2″, Thumb Screws, Knurled Head with Shoulder, Brass
- Diameter (nominal) #8thread pitch 32length (nominal) 1/2″category thumb screwssystem of measurement us unitsbrand aspen fasteners®head style knurled head with shoulderdrive style thumb drivethread length full threadthread direction right-hand threadmaterial brasscoating uncoatednb product images are copyrighted artistic representations which may not reflect the product’s exact appearance, proportions and/or relative dimensions.
(100 pcs) 1/4″-20 X 3/8″, Thumb Screws, Knurled Head with Shoulder, Brass
- Diameter (nominal) 1/4″thread pitch 20length (nominal) 3/8″category thumb screwssystem of measurement us unitsbrand aspen fasteners®head style knurled head with shoulderdrive style thumb drivethread length full threadthread direction right-hand threadmaterial brasscoating uncoatednb product images are copyrighted artistic representations which may not reflect the product’s exact appearance, proportions and/or relative dimensions.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
