Clear Hexagonal Glass Cabinet Knob With Threaded Shank. Cabinet Hardware Glass Knobs
- This charming 1 1/4″ diameter knob fits cabinet doors and drawers from 5/8″, 3/4″ thick. Mounting sleeve 5/8″ d. For a unique vintage look in your kitchen or bath, try this circa 1910 hoosier-style cabinet knob. Suited for doors/drawers 5/8″ to 3/4″ thick. Dimensions 1 1/4″ h x 1 1/4″ d. The completely clear knob has a threaded glass shank that screws directly into a brass receiver for invisible rear mounting. Base 3/4″ d.
Woodtek 169895, Bits, Drill And Boring, Bradpoint, 5/16″ Brad Pt. Drill Bit Right Hand Threaded Shank
- Woodtekâ„¢ hss bradpoint threaded shank drill bits are finely crafted for longer performance 4-1/2″ oal with 3″ cutting length. Shank hole enables easy removal. Right hand rotation. Imported. Available in 1/4″, 5/16″, 3/8″, 7/16″, or 1/2″ cutting diameter. Sharp outlining spurs provide crisp bored holes. 7/16-14 shanks fit most machines.
Drill Bits Short Length Threaded Shank, Stub Series Drill Bit Set 4 Tight Fit Tools 00134
- Drill bits are made of m7 high-speed steel (hss), for drilling hard materials. Drill bits comply with national aerospace standard nas965 drill bits are american made. Three lengths of drill bits longs=2-3/8 inches shorts=1-1/4 inches stubs=3/4-7/8 inch. 135-degree split-point, 1/4-28 threads and a 5/16 inch hex adapter for removal of drill bit. Drill bits are black oxided to prevent chip-to-tool welding and corrosion all items ship usps.
Milwaukee 49-57-1187 Steel Hawg 1-3/16 -Inch Diameter 2-Inch Depth Threaded Shank Annular Cutter
- The product is durable. 2 in cutting depth. The product is easy to use. 1-3/16 in bit diameter. Metric thread size m18 x 15 shank. For use with no 3 morse taper arbor assembly 49-57-0010. The product is manufactured in japan.
Merit Super Finish Quick-Change Mini Grind-O-Flex Abrasive Flap Wheel, Threaded Shank, Ceramic Aluminum Oxide, 1″ Dia., 5/8″ Face Width, Grit 60, 30000 Max RPM (Pack of 10)
- Super finish flap wheel conforms to the area being finished, helping to give a very smooth finish. Ceramic aluminum oxide, a self-sharpening grit that is harder, tougher, and lasts longer than aluminum oxide. Flap wheels conform better to the workpiece than a disc, and are commonly used for grinding and finishing on irregularly shaped workpieces. Cloth backing, for a stiffer, tougher, and thicker backing than paper or film. 1/4″-20 threaded spindle for use on threaded toolholding systems.
LDR 501 6415SS Faucet Hole Cover, 1/2-Inch Threaded Shank, Stainless Steel
- Limited lifetime warranty. Stainless steel finish also comes in chrome and white finish. 1/2-inch threaded shank instruction included. Hides sink holes not being used. Designer finishes.
Drill America TSD Series M42 Cobalt Steel Stubby Length Drill Bit, Gold Oxide Finish, Threaded Shank, Spiral Flute, 135 Degrees Split Point, #43 Size (Pack of 25)
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Threaded shank is for use with threaded-spindle tools, often used in aerospace and automotive applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools. Featured with 135 degrees heavy duty split point and surface treated for drilling hard, tough, high tensile strength materials.
Precision Twist TS18 High Speed Steel Threaded Shank (Short Series) Drill Bit, Black Oxide Finish, Threaded Shank, Spiral Flute, 135 Degree Point Angle, #40
- Threaded hex shank, quickly threads into drills and drill attachments. 135-degree split-point angles is self-centering, reduces walking, good for hard material and reduces pressure on cutting edges. Steam tempering (back oxide) finish retains cutting fluid and prevent chip to tool welding. High-speed steel (hss), for use on a wide variety of materials. Nas 965 type b standards, used in the aircraft industry.
Milwaukee 49-57-0875 Steel Hawg 7/8-Inch Diameter 2-Inch Depth Threaded Shank Annular Cutter
- Metric thread size m18 x 15 shank. The product is easy to use. The product is manufactured in japan. 7/8 in bit diameter. The product is durable. For use with no 3 morse taper arbor assembly 49-57-0010. 2 in cutting depth.
Milwaukee 49-57-4620 Steel Hawg 4-5/8-Inch Diameter 2-Inch Depth Threaded Shank Annular Cutter
- Cuts steel, stainless steel, cast iron, or aluminum. The product is durable. 4-5/8-inch bit diameter. The product is manufactured in japan. Metric thread size m18 x 15 shank. The product is easy to use. 2-inch cutting depth. For use with no 3 morse taper arbor assembly 49-57-0010.
Milwaukee 49-57-0010 Arbor Assembly to Link Threaded Shank Steel Hawg Annular Cutters with 4292-1 or 4297-1 Motor
- The product is durable. Metric thread size m18 x 15. The product is manufactured in japan. Consists of arbor, oil hose and hand pump. The product is easy to use. Arbor assembly for threaded shank steel hawg cutters.
Bosch 92840 1/2-Inch Threaded Shank for 85130 and 85238, 3-Piece
- Designed to give excellent smoothness of cut. Specially designed tips provide fast plunge cutting. Balanced cutting with minimal vibration.
CMT 346.080.11 Dowel Drill with Threaded Shank, 5/16-Inch Diameter, M10 Shank, Right-Hand Rotation
- Use on boring machines equipped with chucks for drilling blind holes. Application on solid wood, wood composites, plastic and laminated materials. 43mm cutting length, 63mm adjusting length, 2 carbide-tipped cutting edges, 2 spurs, 4 flutes. Use on ayen, holzma, knoevenagel, mayer, torwegge machines. Super strength steel body, tungsten carbide tipped head with balanced center point.
Merit High Performance Quick-Change Mini Grind-O-Flex Abrasive Flap Wheel, Threaded Shank, Ceramic Aluminum Oxide, 1″ Dia., 5/8″ Face Width, Grit 60, 30000 Max RPM (Pack of 10)
- Ceramic aluminum oxide is a self-sharpening grit that is harder, tougher, and lasts longer than aluminum oxide. High-performance flap wheel is aggressive and works well for high stock removal. Cloth backing is stiffer, tougher, and thicker than a paper or film backing. Flap wheels conform better to the workpiece than a disc, and are commonly used for grinding and finishing on irregularly shaped workpieces. 1/4″-20 threaded spindle for use on threaded toolholding systems.
Jacobs Chuck 7347D Threaded Shank to Morse Taper Arbor, 2 Morse 5/8″-16 Mount, 4-3/16″ Length
- 5/8″-16 arbor thread. Jacobs chuck threaded shank to morse taper arbor. Shank type 2 morse taper. 11/16 threaded extension (l-1). Precision machined and ground to master gages for maximum performance with jacobs drill and tap chucks. 4-3/16-inches length. Ideal for use with custom tool and work holder designs and for specialized machining applications.
Milwaukee 49-57-2620 Steel Hawg 2-5/8-Inch Diameter 2-Inch Depth Threaded Shank Annular Cutter
- The product is manufactured in japan. The product is easy to use. For use with no 3 morse taper arbor assembly 49-57-0010. The product is durable. 2-5/8 in bit diameter. 2 in cutting depth. Metric thread size m18 x 15 shank.
Milwaukee 49-57-3000 Steel Hawg 3-Inch Diameter 2-Inch Depth Threaded Shank Annular Cutter
- The product is easy to use. 3 in bit diameter. The product is durable. 2 in cutting depth. The product is manufactured in japan. Metric thread size m18 x 15 shank. For use with no 3 morse taper arbor assembly 49-57-0010.
D.H.S. Medium Duty Nylon Furniture Levelers – 1/4″ Threaded Shank w/T-Nuts – 400 Lb. Total Capacity – Adjusts from 0″ to 3/4″ – Set of 4
- Floor friendly, the nylon foot is an inconspicuous 3/4″ in diameter and is kind to hardwood floors. Plenty strong, each leg can support 100 lbs so a set of 4 can handle furniture pieces as heavy as 400 lbs. Easy peezy installation, drill a 5/16″ hole in each corner, tap in t-nuts, screw in leveler done. Lots of adjustment, each leg can be adjusted from 0″ to 3/4″ plenty for even the most out-of-whack floors. You get, 4 levelers & 4 t-nuts.
Milwaukee 49-57-1000 Steel Hawg 1-Inch Diameter 2-Inch Depth Threaded Shank Annular Cutter
- The product is easy to use. 1 in bit diameter. Metric thread size m18 x 15 shank. The product is durable. The product is manufactured in japan. 2 in cutting depth. For use with no 3 morse taper arbor assembly 49-57-0010.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
