Woodstock D3538 93-Inch Bi-Metal Bandsaw Blade, 3/4 by 8-12
- 003-inch thick. 3/4-inch wide. High carbon steel. 93-inch long. 8-12 variable pitch tpi.
Imachinist S561214 M42 56-1/2-inch By 1/2-inch By 14tpi Bi-metal Bandsaw Blades Metal Cutting
- If you are satisfied with our products, it will be highly appreciated if you could leave us a positive feedback and review on amazon. 2. If you have any question, please feel free to contact me here before open a a-to-z claims or leave a negative feedback. Sharpsaw new bi-metal band saw blade length 56-1/2″ width 1/2″ thickness 0. 025″ teeth 14tpi package 1 piece 56-1/2″ x 1/2″ x 14tpi band saw blade suitable cutting ferrous and non-ferrous metal shippment china post (usps-first class) shipping time 7-20days (usually), 21-45 (sometimes) after-sales service 1.
Magnate M62M12T18 M-42 Bi-Metal Bandsaw Blade, 62″ Long – 1/2″ Width; 18 Tooth; 0.025″ Thickness
- Plastic capping protects teeth against damage in transit and handling (1-inches and wider). Wood or metal cutting 1/2″ width 18 tooth 0025″ thickness. Tooth geometries provide optimum cutting performance across a wide array of applications and materials. Oversized blade width increases beam strength. Measures 75-inches length by 3/4-inches width by 0035-inches thick.
Magnate M131.5M1V2 M-42 Bi-metal Bandsaw Blades, 131-1/2″ Long – 1″ Width; 2-3 Variable Tooth
- E. 11-1/2 inch, 10′ 11-1/2″ ) bandsaw blades suit the following modelsgrizzly g0513 g0513x2 g0513b g0640x 17″ general international 90-320 m1 (metalcutting) if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 20, 24 variable to cut 1/16″ to 1/4″ thick material, 14, 18 variable to cut 1/8″ to 3/8″ thick material, 10, 14 variable to cut 3/16″ to 7/16″ thick material, 8, 12 variable to cut 1/4″ to 1/2″ thick material, 6, 10 variable or 6 hook to cut 5/16″ to 5/8″ thick material, 5, 8 variable or 6 hook to cut 3/8″ to 1″ thick material, 4, 6 variable or 6 hook to cut 1/2″ to 2″ thick material, 3, 4 variable or 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 131-1/2 inch ( 10 ft. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Bi-metal bandsaw blades can cut all types of woods and are especially ideal for hard woods, i. Oak, maple, walnut or cherry. E. 2, if the owner’s manual is not available, r. Steel). E. Bi-metal bandsaw blades are also most commonly used for metalcutting, i. Carbon steels, light alloy steels, mold steels, and tool steels. The picture depicted represents one blade the pricing is for one blade/package. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced.
Magnate M80M38T10 M-42 Bi-metal Bandsaw Blade, 80″ Long – 3/8″ Width; 10 Tooth; 0.025″ Thickness
- Designed for constant feed and pressure machines, user friendly blade. Tempered alloy backer results in longer life for contour cutting. Wood or metal cutting 3/8″ width 10 tooth 0025″ thickness. M42 high-speed steel edge provides high wear resistance for longer life. Bi-metal construction means longer life and lower cost per cut than carbon blades.
Magnate M97M12V6 M-42 Bi-metal Bandsaw Blade, 97″ Long – 1/2″ Width; 6-10 Variable Tooth
- Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Bi-metal bandsaw blades are also most commonly used for metalcutting, i. Carbon steels, light alloy steels, mold steels, and tool steels. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 20, 24 variable to cut 1/16″ to 1/4″ thick material, 14, 18 variable to cut 1/8″ to 3/8″ thick material, 10, 14 variable to cut 3/16″ to 7/16″ thick material, 8, 12 variable to cut 1/4″ to 1/2″ thick material, 6, 10 variable or 6 hook to cut 5/16″ to 5/8″ thick material, 5, 8 variable or 6 hook to cut 3/8″ to 1″ thick material, 4, 6 variable or 6 hook to cut 1/2″ to 2″ thick material, 3, 4 variable or 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 97 inch ( 8 ft. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. E. E. The picture depicted represents one blade the pricing is for one blade/package. 3. Oak, maple, walnut or cherry. Bi-metal bandsaw blades can cut all types of woods and are especially ideal for hard woods, i. 2, if the owner’s manual is not available, refer to previous invoices. E. 1 inch, 8′ 1″ ) bandsaw blades suit the following models jet hbs-814gh (metalcutting) grizzly 8144z (94-1/4 to 98-1/4 metalcutting) if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Steel). Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced.
Bosch BS9312-18M 93-1/2-Inch by 3/8-Inch by 18TPI Metal Bandsaw Blade
- Resists heat build up for longer life. Made from premium grade steel. Optimized tooth geometry for best cutting performance.
SuperCut 50110 64 1/2-Inch by 1/2-Inch by 0.025 by 10-14 T.P.I. Premium Bimetal Bandsaw Blade Recommended for Cutting Mild Steel or Stainless Steel
- Bimetal blades will give lower cost per cut on tough sawing jobs. The teeth are then milled or ground into the m2 steel. They can be run at higher speeds up to 300 feet per minute with or without cooling. Supercut premium bimetal bandsaw blades are a superior blade with high alloy, high-speed m2 steel teeth and a spring steel back to provide flexibility and toughness in the blade. These blades are the best option for production cutting of mild and stainless steels. Bimetal blades are welded by a laser beam under high vacuum to attach the strip of high-speed m2 steel to the spring steel back. All supercut bandsaw blades are made in the usa.
Magnate M97.5M1V10 M-42 Bi-metal Bandsaw Blade, 97-1/2″ Long – 1″ Width; 10-14 Variable Tooth
- Steel). 1-1/2 inch, 8′ 1-1/2″ ) bandsaw blades suit the following models general® 90-150 m1 (woodworking) grizzly® 8144z (94-1/4″ to 98-1/4″ metal) if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 20, 24 variable to cut 1/16″ to 1/4″ thick material, 14, 18 variable to cut 1/8″ to 3/8″ thick material, 10, 14 variable to cut 3/16″ to 7/16″ thick material, 8, 12 variable to cut 1/4″ to 1/2″ thick material, 6, 10 variable or 6 hook to cut 5/16″ to 5/8″ thick material, 5, 8 variable or 6 hook to cut 3/8″ to 1″ thick material, 4, 6 variable or 6 hook to cut 1/2″ to 2″ thick material, 3, 4 variable or 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 97-1/2 inch ( 8 ft. Bi-metal bandsaw blades can cut all types of woods and are especially ideal for hard woods, i. The picture depicted represents one blade the pricing is for one blade/package. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. 2, if the owner’s manual is not available, refer to prev. Carbon steels, light alloy steels, mold steels, and tool steels. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. E. Oak, maple, walnut or cherry. E. E. Bi-metal bandsaw blades are also most commonly used for metalcutting, i.
Imachinist S56781214 M42 Bi-metal Bandsaw Blades 56-7/8″ X 1/2″ X 14TPI Metal Cutting
- Sharpsaw new bi-metal band saw blade length 56-7/8″ width 1/2″ thickness 0. If you are satisfied with our products, it will be highly appreciated if you could leave us a positive feedback and review on amazon. 2. If you have any question, please feel free to contact me here before open a a-to-z claims or leave a negative feedback. 025″ teeth 14tpi package 1 piece 56-7/8″ x 1/2″ x 14tpi band saw blade suitable cutting ferrous and non-ferrous metal shippment china post (usps-first class) shipping time 7-20days (usually), 21-45 (sometimes) after-sales service 1.
Magnate M150M12V8 M-42 Bi-metal Bandsaw Blades, 150″ Long – 1/2″ Width; 8-12 Variable Tooth
- Proprietary heat treat minimizes tooth chipping and improves blade flex life. Plastic capping reduces tooth tip damage during transit and handling. Measures 93-inches length by 3/4-inches width by 0035-inches thick. Wood or metal cutting 1/2″ width 8-12 variable tooth 0025″ thickness. Robust tooth geometry produces faster cutting rates and increases productivity.
Magnate M82M34V6 M-42 Bi-metal Bandsaw Blade, 82″ Long – 3/4″ Width; 6-10 Variable Tooth
- E. Steel). 2, if the owner’s manual is not available, refer to previous invoices. Carbon steels, light alloy steels, mold steels, and tool steels. Bi-metal bandsaw blades can cut all types of woods and are especially ideal for hard woods, i. Bi-metal bandsaw blades are also most commonly used for metalcutting, i. The picture depicted represents one blade the pricing is for one blade/package. Oak, maple, walnut or cherry. 10 inch, 6′ 10″ ) bandsaw blades suit the following models grizzly g0613 delta 12″ 28-190, 16″ 28-560 (three wheeler) wilton zip miter if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. E. E. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 20, 24 variable to cut 1/16″ to 1/4″ thick material, 14, 18 variable to cut 1/8″ to 3/8″ thick material, 10, 14 variable to cut 3/16″ to 7/16″ thick material, 8, 12 variable to cut 1/4″ to 1/2″ thick material, 6, 10 variable or 6 hook to cut 5/16″ to 5/8″ thick material, 5, 8 variable or 6 hook to cut 3/8″ to 1″ thick material, 4, 6 variable or 6 hook to cut 1/2″ to 2″ thick material, 3, 4 variable or 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 82 inch ( 6 ft. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc.
Magnate M125M38T10 M-42 Bi-metal Bandsaw Blade, 125″ Long – 3/8″ Width; 10 Tooth; 0.025″ Thickness
- Wood or metal cutting 1/4″ width 14-18 variable tooth 0025″ thickness. Wood or metal cutting 1/2″ width 14-18 variable tooth 0025″ thickness. For use with portable band saws using 44-7/8″ x 1/2″ x 020″ blades. The product is manufactured in united states. The product is durable. Limited warranty. Wood or metal cutting 3/8″ width 10 tooth 0025″ thickness. The product is easy to use.
Magnate M133M12V14 M-42 Bi-metal Bandsaw Blades, 133″ Long – 1/2″ Width; 14-18 Variable Tooth
- M42 high-speed steel edge provides high wear resistance for longer life. Bi-metal construction means longer life and lower cost per cut than carbon blades. Tempered alloy backer results in longer life for contour cutting. Wood or metal cutting 3/8″ width 10 tooth 0025″ thickness. Wood or metal cutting 1/2″ width 14-18 variable tooth 0025″ thickness.
Bosch BS6412-24M 64-1/2-Inch by 1/2-Inch by 24TPI Metal Bandsaw Blade
- Made from premium grade steel. Resists heat build up for longer life. Optimized tooth geometry for best cutting performance.
Magnate M93.5M14V14 M-42 Bi-metal Bandsaw Blade, 93-1/2″ Long – 1/4″ Width; 14-18 Variable Tooth
- Wood or metal cutting 1/4″ width 14-18 variable tooth 0025″ thickness. Wood or metal cutting 1/4″ width 10-14 variable tooth 0025″ thickness. M42 high-speed steel edge provides high wear resistance for longer life. Wood or metal cutting 3/4″ width 18 wavy tooth 0035″ thickness. Measures 144-inches length by 1/2-inches width by 0025-inches thick.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
