3/8-18 NPT Hex Rethreading Die for Taper Pipe Threads- Carbon Steel
- For repairing worn or damaged npt taper pipe threads. For rethreading standard “3/8″ pipe”, the actual thread dimension is greater than 3/8″. Size 3/8-18 npt. Can be used with an adjustable wrench. Great in tight places.
1-1/4″-11 1/2 NPT Hex Rethreading Die for Taper Pipe Threads- Carbon Steel
- Size 1 1/4″-11 1/2″ npt. For rethreading standard “1-1/4″ pipe”, the actual thread dimension is greater than 1-1/4″. Great in tight places. For repairing worn or damaged npt taper pipe threads. Can be used with an adjustable wrench.
Kodiak Cutting Tools KCT233462 USA Made NPT Taper Pipe Threading Tap for National Pipe Taper Threads, Ground Threads, High Speed Steel, 4 Flute, 0.5625″ Shank, 1-1/16″ Thread Length, 2-7/16″ Overall Length, 1/4-18 Size
- 5625″ shank 1-1/16 thread length 2-7/16″ overall length 4 flute pipe threading tap for national pipe taper threads. 1/4-18 inch diameter npt taper pipe tap.
Kodiak Cutting Tools KODIAK212078 USA Made NPT Taper Pipe Tap, Ground Threads High Speed Steel Pipe Threading Tap, 4 Flute, 0.6875″ Shank, 1-3/8 Thread Length, 3-1/8″ Overall Length, 1/2-14 Size
- 1/2-14 npt taper pipe tap. 6875″ shank 1-3/8 thread length 3-1/8″ overall length 4 flute pipe threading tap for national pipe taper threads. .
RedLine Tools RT34206 – 1/4-18, H4 Limit, Oxide Coated, HSS (High-Speed Steel), NPT Taper Pipe Tap
- Coating oxide coated. Type npt, taper pipe. Thread size/pitch 1/4-18. Made in the usa. Thread limit h4.
Morse Cutting Tools 31251 Solid Round NPT Taper Pipe Dies, Carbon Steel, 1″ Outside Diameter, 3/8″ Thick, 1/8″, 27 Size
- Solid round dies are non-adjustable. Round dies are designed for cutting external screw threads, either by hand, using a die stock or by machine, using a floating die holder.
Eazypower 82615 1/4×18 NPT Taper Tap – Quantity 6
- Coating oxide coated. Made in the usa. Type npt interrupted, taper pipe. 1/2×14 npt taper tap. 1/4×18 npt taper tap.
Kodiak Cutting Tools KCT212045 USA Made 1/8-27 NPT Taper Pipe Threading Tap for National Pipe Taper Threads, Ground Threads, High Speed Steel, 4 Flute, .4375″ Shank, 3/4″ Thread Length, 2-1/8″ Overall Length
- 4375″ shank 3/4 thread length 2-1/8″ overall length 4 flute pipe threading tap for national pipe taper threads. 1/8-27 npt taper pipe tap. .
RedLine Tools RT34408 – 3/8-18, H4 Limit, TiN Coated, HSS (High-Speed Steel), NPT Taper Pipe Tap
- Made in the usa. Thread size/pitch 3/8-18. Coating tin coated. Type npt, taper pipe. Thread limit h4.
2″-11 1/2 NPT Hex Rethreading Die for Taper Pipe Threads- Carbon Steel
- Great in tight places. Can be used with an adjustable wrench. Size 2″-11 1/2″ npt. For repairing worn or damaged npt taper pipe threads. For rethreading standard “2” pipe”, the actual thread dimension is greater than 2″.
Irwin 1904 Hanson 3/8″-18 Npt Taper Pipe Tap
- Ideal for pipe fittings. Tapered at a rate of 3/4″ per foot. Nominal size of the tap is that of the pipe fitting being tapped. Available in national pipe taper (npt) and british standard pipe taper (bsp). Cuts internal threads in pipes.
3/8″ – 18 NPT Taper Pipe Die
- Outside diameter is 38mm. 3/8″, 18 npt taper pipe die. Carbon steel.
Hanson 8203 Tap 1/4-18 Npt Taper for Tap Die Extraction
- 1/4″ size with 18 npt (national pipe taper). Nominal size of the tap is that of the pipe fitting being tapped. Taps are tapered at a rate of 3/4 inches per foot. Each taper tap is used to cut internal threads in pipes. This taper tap is ideal for pipe fittings.
Morse Cutting Tools 36124 Taper Pipe Taps, High-Speed Steel, Bright Finish, NPT Regular Thread, 4 Flutes, 1/4″-18″ Size
- Recommended for a wide variety of materials, especially soft ductile materials and materials producing long continuous chips. Interrupted thread taper pipe tap reduce friction, increase chip capacity and enhanced coolant flow to the cutting teeth for reduced chance of torn threads. Assembly requires the use of a thread sealant to ensure a tight seal. Npt taper pipe taps are commonly used for tapping pipe fittings and couplings in a wide variety of materials.
RedLine Tools RT34308 – 3/8-18, H5 Limit, Oxide Coated, HSS (High-Speed Steel), NPT Taper Pipe Tap
- Thread size/pitch 3/8-18. Made in the usa. Coating oxide coated. Thread limit h5. Type npt interrupted, taper pipe.
Kodiak Cutting Tools KODIAK212089 USA Made NPT Taper Pipe Tap, Ground Threads High Speed Steel Pipe Threading Tap, 5 Flute, 0.9063″ Shank, 1-3/8 Thread Length, 3-1/4″ Overall Length, 3/4-14 Size
- 9063″ shank 1-3/8 thread length 3-1/4″ overall length 5 flute pipe threading tap for national pipe taper threads. 3/4-14 npt taper pipe tap.
RedLine Tools RTG7013 – 3/4-14, Oxide Coated, Powdered Metal Steel, NPT Taper Pipe Tap
- Coating oxide coated. Type npt, taper pipe. Made in the usa. Thread limit. Thread size/pitch 3/4-14.
1/16″ – 27 NPT Taper Pipe Die
- Outside diameter is 25mm. 1/16″, 27 npt taper pipe die. Carbon steel.
RedLine Tools RT34406 – 1/4-18, H4 Limit, TiN Coated, HSS (High-Speed Steel), NPT Taper Pipe Tap
- Coating tin coated. Type npt, taper pipe. Thread size/pitch 1/4-18. Made in the usa. Thread limit h4.
Eazypower 82618 1/2×14 NPT Taper Tap – Quantity 6
- 1/2×14 npt taper tap. Type npt interrupted, taper pipe. Thread limit h5. Made in the usa. Coating oxide coated.
RedLine Tools RT32206 – 1/4-18, H4 Limit, Uncoated, HSS (High-Speed Steel), NPT Taper Pipe Tap
- Made in the usa. Thread limit h4. Type npt, taper pipe. Thread size/pitch 1/4-18. Coating uncoated.
Kodiak Cutting Tools KODIAK212056 USA Made NPT Taper Pipe Tap, Ground Threads High Speed Steel Pipe Threading Tap, 4 Flute, 0.5625″ Shank, 1-1/16 Thread Length, 2-7/16″ Overall Length, 1/4-18 Size
- 5625″ shank 1-1/16 thread length 2-7/16″ overall length 4 flute pipe threading tap for national pipe taper threads. 1/4-18 npt taper pipe tap. .
HHIP 1011-3306 6 Piece NPT Taper Pipe Tap Set, 1/4~1-1/4 Inch
- ~ ideal for pipe fitting. ~ Includes 1 each of the following sizes 1/4~18, 3/8~18, 1/2~14, 3/4~14, 1~11-1/2, 1-1/4~11-1/2. ~ Cuts internal threads in pipes. ~ Tapered at a rate of 3/4″ per foot. 6 piece npt taper piper tap set ~ thread ground. ~ High speed steel.
ZFE 1Pc 3/8″-18 NPT Taper HSS Pipe Tap Machine Thread Tap
- Zfe 1pc 3/8″-18 npt taper hss pipe tap machine thread tap. Uncoated (bright) tools have no additional surface treatment or coating. Hand threading tap with straight flutes cuts threads in through holes and blind holes. High-speed steel for compatibility with a variety of materials. Round shank with square end allows tap to be used in hand or power-driven applications.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
