Best and Coolest 24 Dust Collectors in 2020

 

HQRP Dust Collector Bag compatible with BoschRIGIDRyobiDeWaltKobaltSkilsawCraftsmanPorter CableDeltaMakita 10 Tablesaws with 25 Dust Port

HQRP Dust Collector Bag compatible with Bosch/RIGID/Ryobi/DeWalt/Kobalt/Skilsaw/Craftsman/Porter Cable/Delta/Makita 10″ Tablesaws with 2.5″ Dust Port

HQRP Dust Collector Bag compatible with Bosch/RIGID/Ryobi/DeWalt/Kobalt/Skilsaw/Craftsman/Porter Cable/Delta/Makita 10″ Tablesaws with 2.5″ Dust Port - Replaces bosch part ts1004 easy to attach and detach to your tablesaw. Hqrp® dust collector bag with wire support frame. Dimensions l 29″ x w 13″ head side x w 9″ end side, d of ring 25″ up to 2 7/8″. Helps keep work area cleaner collects up to 70% of dust and particles. Can be used with other table saws that have 2-1/2 inch dust ports on the exterior of the saw.

 

5 Micron Replacement Bag for Rockler Wall Mount Dust Collector

5 Micron Replacement Bag for Rockler Wall Mount Dust Collector

5 Micron Replacement Bag for Rockler Wall Mount Dust Collector - Heavy debris is captured in 20 gallon drum with quick release levers and independent casters for quick emptying. The cyclone’s two stage separation provides more working cfm than comparable horsepower single stage units. Fine dust particles are filtered through pleated material that captures even the smallest particles down to 1 micron and below. Direct mounted filter eliminates inefficiencies from ridged flex hosing and bends. Heavy debris is pulled down to collection drum before debris stream reaches the filter, providing constant suction.

 

POWERTEC DC1080 Portable Shop Dust Collector with 1 HP Motor

POWERTEC DC1080 Portable Shop Dust Collector with 1 HP Motor

POWERTEC DC1080 Portable Shop Dust Collector with 1 HP Motor - Versatile size features a portable base size of 15-3/4 x 39-3/4 inches and caster wheels, working as both a mobile or stationary compact dust collector unit that maximizes shop space. Superior bag filtration the unit’s upper filter bag cleans, purifies and filters the air, capturing even the smallest fine dust, allergens, pollutants and particulate matter down to 2 5 microns in size. Includes 1 hp dust collector. Power 1 horsepower, 120v/ 240v, 60hz, pre-wired 110v, single-phase motor. Air suction capacity 800 cfm.

 

Central Machinery 2 HP Industrial 5 Micron Dust Collector

Central Machinery 2 HP Industrial 5 Micron Dust Collector

Central Machinery 2 HP Industrial 5 Micron Dust Collector - Easily eliminate the finest sawdust, dirt and debris with this remarkably effective dust collector system, complete with a clear bottom bag so you see what’s been collected. •Clear bottom bag, so you’ll know when it’s full •four locking swivel casters for easy transport •lockable toggle switch •4″ diameter intake and 4″ diameter exhaust •includes two collection bags, casters, hex wrenches. This 5 micron dust collector is the ultimate solution to your clean up frustrations. Four locking, swivel casters enable easy transport of your dust collector to anywhere it’s needed.

 

Dust Right Canister Filter for Wall Mount Dust Collector

Dust Right Canister Filter for Wall Mount Dust Collector

Dust Right Canister Filter for Wall Mount Dust Collector - The cyclone’s two stage separation provides more working cfm than comparable horsepower single stage units. Heavy debris is captured in 20 gallon drum with quick release levers and independent casters for quick emptying. Fine dust particles are filtered through pleated material that captures even the smallest particles down to 1 micron and below. Direct mounted filter eliminates inefficiencies from ridged flex hosing and bends. Heavy debris is pulled down to collection drum before debris stream reaches the filter, providing constant suction.

 

Jet Tools - RF Remote Control 220V for Dust Collectors 708636D

Jet Tools – RF Remote Control 220V, for Dust Collectors (708636D)

Jet Tools – RF Remote Control 220V, for Dust Collectors (708636D) - Jpw is committed to providing unmatched service at every step of every business relationship. U s based technical service for all of our brands. Stock more than 40, 000 replacement parts. Built to serve the needs of our customers. The future built on great brands.

 

Kufo Seco UFO-103B 5 HP 3900 CFM 3 Phase 220-volt440-volt Vertical Bag Dust Collector

Kufo Seco UFO-103B 5 HP 3900 CFM 3 Phase 220-volt/440-volt Vertical Bag Dust Collector

Kufo Seco UFO-103B 5 HP 3900 CFM 3 Phase 220-volt/440-volt Vertical Bag Dust Collector - 7-inch inlet allowing for four 4-inch “y”-shaped attachments. Ideal for servicing wood working shops and industrial workshops. All metal body and fan impeller construction for durability, plus roller wheel for maneuverability between areas as needed. 3,990-cfm / 220-volts or 440-volts (wired for 220v) / 60-hertz / 3-phase, additional component required for 440v. High output 5 hp tefc (totally enclosed fan cooled) motor design for long and continuous use.

 

SHOP FOX W1685 15-Horsepower 1280 CFM Dust Collector

SHOP FOX W1685 1.5-Horsepower 1,280 CFM Dust Collector

SHOP FOX W1685 1.5-Horsepower 1,280 CFM Dust Collector - This unit features an extra heavy-duty 12″ steel impeller and a 1-1/2 hp motor that runs on 110v. 5 micron filtration. For wood dust only. Features 2. A powerful dust collector from shop fox.

 

PSI Woodworking DC725 Portable Tabletop Dust Collector

PSI Woodworking DC725 Portable Tabletop Dust Collector

PSI Woodworking DC725 Portable Tabletop Dust Collector - This lightweight unit is a self-contained dust collection system. The clear polycarbonate doors direct the flow of air to give the maximum suction. Ideal for power carving and sanding in any location. Dust is drawn in by three computer-grade, quiet, maintenance free fans. There is a convenient outlet for your power carver and light with mounting holes for both. Easily positioned on a workbench or any table. The fans and the filter are integrated into a portable 8-1/2″ x 10-3/8″ x 23-1/4″ cabinet. Dust is captured by an 10″ x 20″ filter at 725 cpm.

 

POWERTEC 70001 Dust Collector Bag 20 x 31 1 Micron Filter

POWERTEC 70001 Dust Collector Bag, 20″ x 31″, 1 Micron Filter

POWERTEC 70001 Dust Collector Bag, 20″ x 31″, 1 Micron Filter - Design made from ultra-thick material, these reusable high grade collection bags were crafted for long term use, while making a huge difference for keeping your shop clean, and without a reduction of air flow. Size each dust bag measures approximately 31 inches high and 20 inches in diameter. Application this 1 micron filter bag is used to control and trap up to 99% of fine dust particles created when utilizing sanding, table saw and other woodworking equipment. Includes (1) heavy duty dust collection bag. Compatibility designed to work as a top dust filter bag for most dust collector systems.

 

LAGUNA TOOLS 15 HP CFlux1 Dust Collector

LAGUNA TOOLS 1.5 HP C|Flux:1 Dust Collector

LAGUNA TOOLS 1.5 HP C|Flux:1 Dust Collector - Motor hp 1 5 hp. Voltage 110v. Recommended breaker 30 amp (110v)/ 15 amp (220v). Full load amperage draw [fla] 18 8(110v) / 9 4(220v). The flux series can be equipped with an optional auto clean kit either at time of purchase or as an add-on later the auto clean kit includes a smart sensor that detects a rise in static pressure indicating the filter is getting clogged and automatically activates the cleaning procedure. Ingenious lift system quickly moves the drum off the floor and seals against the drum lid, avoiding the need for a flex hose this design allows for much better portability as you are not forcing 4 wheels into the floor while pushing the unit. Hertz 60. Phase 1. The flux 1 comes standard with a 1 micron canister providing filtration of 99 97% of particles between the sizes of 0 2 to 2 micron & features 48 sq/ft of polyester spun bond pleated filter to ensure maximum airflow 270° manual clean comes standard.

 

Jet DC-1100VX-CK Dust Collector 15HP 1PH 115230-Volt 2-Micron Canister Kit

Jet DC-1100VX-CK Dust Collector 1.5HP 1PH 115/230-Volt 2-Micron Canister Kit

Jet DC-1100VX-CK Dust Collector 1.5HP 1PH 115/230-Volt 2-Micron Canister Kit - Vortex cone improves chip separation and collector bag packing efficiency. Industrial controls designed for years of trouble free use. Single stage design for economical and quiet operation. Quick connect collection bags with elastic band for fast, easy installation and removal. Eliminates premature filter clogging for sustained performance.

 

POWERTEC 70006 Dust Collector Bag 14-Inch x 24-Inch 1 Micron Filter

POWERTEC 70006 Dust Collector Bag, 14-Inch x 24-Inch, 1 Micron Filter

POWERTEC 70006 Dust Collector Bag, 14-Inch x 24-Inch, 1 Micron Filter - Compatibility designed to work as a top dust filter bag for most dust collector systems. Constructed of polyester felt with a singed finish. Designed to fit most wall mount dust collectors including grizzly g0710, rockler, shop fox w1826 and other brands. Application this 1 micron filter bag is used to control and trap up to 99% of fine dust particles created when utilizing sanding, table saw and other woodworking equipment. Design made from ultra-thick material, these reusable high grade collection bags were crafted for long term use, while making a huge difference for keeping your shop clean, and without a reduction of air flow. Measures 14-inch diameter by 24-inch high. Size each dust bag measures approximately 24 inches high and 14 inches in diameter. 1-micron filter bag. Superior to the oem bag. Includes (1) heavy duty dust collection bag.

 

WEN 3401 57-Amp 660 CFM Dust Collector with 12-Gallon Bag and Optional Wall Mount

WEN 3401 5.7-Amp 660 CFM Dust Collector with 12-Gallon Bag and Optional Wall Mount

WEN 3401 5.7-Amp 660 CFM Dust Collector with 12-Gallon Bag and Optional Wall Mount - 4-inch dust port allows for connection to your favorite woodworking tools. 57-amp motor moves over 660 cubic feet of air per minute. Four swivel casters lock in place to prevent unwanted movement during operation. Mount the unit to the wall of your shop for accessible dust collection whenever you need it. Compact design features onboard carrying handle for easy storage and transportation.

 

HQRP Dust Collector Bag for DeWalt DW745 DW744 DW744X DWE7491RS DWE7480 745 744 744x 7480 7491 10-inch TablesawsPlaners HQRP Coaster

HQRP Dust Collector Bag for DeWalt DW745, DW744, DW744X, DWE7491RS, DWE7480, 745, 744, 744x, 7480, 7491 10-inch Tablesaws/Planers+ HQRP Coaster

HQRP Dust Collector Bag for DeWalt DW745, DW744, DW744X, DWE7491RS, DWE7480, 745, 744, 744x, 7480, 7491 10-inch Tablesaws/Planers+ HQRP Coaster - Replaces bosch part ts1004 easy to attach and detach to your tablesaw. Dimensions l 29″ x w 13″ head side x w 9″ end side, d of ring 25″ up to 2 7/8″. Hqrp® dust collector bag with wire support frame + hqrp® coaster. 2 weeks doa replacement warranty. Helps keep work area cleaner collects up to 70% of dust and particles.

 

Clear Plastic Dust Collector Bags 20-Inch Dia 5-Pack

Clear Plastic Dust Collector Bags, 20-Inch Dia, (5-Pack)

Clear Plastic Dust Collector Bags, 20-Inch Dia, (5-Pack) - Packs of 5. High quality bags made from a thick, flexible plastic material. The clear plastic lets you instantly see when to change bags. Measure 43″ long and are 20″ in diameter. Bags work with most upright dust collector 1-1/2 hp and larger models with 20″ diameter filters.

 

PSI Woodworking LR110-3 Long Ranger III 110V Remote Dust Collector Starter Switch

PSI Woodworking LR110-3 Long Ranger III 110V Remote Dust Collector Starter Switch

PSI Woodworking LR110-3 Long Ranger III 110V Remote Dust Collector Starter Switch - Fcc approved rf signal goes through walls with no outside interference unlimited programmable frequencies extra hand controls available (lrtm-3). Includes receiver, hand control, 9v battery. Input voltage 110-125 volts ac maximum 16 amps maximum horsepower 1 5hp. Save yourself the inconvenience of walking over to turn on your dust collector while you’re in the middle of a critical project simply press the transmitter on/off button to easily switch your dust collector on or off. 50 foot range 5 foot cord on receiver module requires 9v battery (included).

 

5 to 4 Inches Duct Reducer ABS Plastic with 4 Inch OD and 5 Ich OD Openings Dust Collector Systems 73472

5 to 4 Inches Duct Reducer ABS Plastic with 4 Inch OD and 5 Ich OD Openings Dust Collector Systems 73472

5 to 4 Inches Duct Reducer ABS Plastic with 4 Inch OD and 5 Ich OD Openings Dust Collector Systems 73472 - These fittings are made from 1/8″ thick abs abrasion resistant plastic and are designed to withstand the abrasive nature of wood chips and saw dust. Due to the potential for built up of static electricity, it is recommended that all dust collection systems with plastic fittings be properly grounded. One end has 4″ od opening and the other has 5″ od opening. These abs plastic reducers are very economical priced to allow you to outfit your dust collection system for maximum performance. These reducers allow fitting of a 4″ dust collection hose to a 5″ hose. 75″. Has a flange to allow easy assemble/disassemble. Overall length is 4.

 

Laguna Tools MDCCF22201 CFlux2 2HP 220V Cyclone Dust Collector

Laguna Tools MDCCF22201 C|Flux:2 2HP 220V Cyclone Dust Collector

Laguna Tools MDCCF22201 C|Flux:2 2HP 220V Cyclone Dust Collector - Phase 1. Motor hp 2 hp. Recommended breaker 20 amp. Hertz 60. Amps 14 amps. Rpm 3450. The flux 2 comes standard with a 1 micron canister providing filtration of 99 97% of particles between the sizes of 0 2 to 2 micron & features 109 sq/ft of polyester spun bond pleated filter to ensure maximum airflow 270° manual clean comes standard. Switch type radio frequency remote switch, black box. Voltage 220v.

 

Jet DC-1200VX-BK1 Dust Collector 2HP 1PH 230-Volt 30-Micron Bag Filter Kit

Jet DC-1200VX-BK1 Dust Collector 2HP 1PH 230-Volt 30-Micron Bag Filter Kit

Jet DC-1200VX-BK1 Dust Collector 2HP 1PH 230-Volt 30-Micron Bag Filter Kit - U s based technical service for all of our brandsfilter bag/canister length 32 inch. Built to serve the needs of our customers. Stock more than 40, 000 replacement parts. The future built on great brands. Jpw is committed to providing unmatched service at every step of every business relationship.

 

12 x 12 x 25 Inch ABS Plastic Flange with 4 Inch OD Opening for Dust Collector Systems 73467

12 x 12 x 2.5 Inch ABS Plastic Flange with 4 Inch OD Opening for Dust Collector Systems 73467

12 x 12 x 2.5 Inch ABS Plastic Flange with 4 Inch OD Opening for Dust Collector Systems 73467 - No mounting holes. Used to connect dust collection hoses to the underside of a table saws, jointers, etc. Made from strong 1/8″ thick abrasion resistant abs plastic that will withstand abrasive nature of sawdust and wood chips. Overall size is 12″ x 12″ x 25″ deep. Opening is 3800″ and tapers to 400″ od and will accept 4″ flexible hose via hose clamp or tapered quick connect fitting.

 

Jet JCDC-2 2 hp Cyclone Dust Collector

Jet JCDC-2 2 hp Cyclone Dust Collector

Jet JCDC-2 2 hp Cyclone Dust Collector - Fine dust particles are filtered through pleated material that captures even the smallest particles down to 1 micron and below. The cyclone’s two stage separation provides more working cfm than comparable horsepower single stage units. Direct mounted filter eliminates inefficiencies from ridged flex hosing and bends. Heavy debris is captured in a 30 gallon drum with quick release levers and independent casters for quick emptying. Heavy debris is pulled down to collection drum before debris stream reaches the filter, providing constant suction.

 

Powermatic PM1900TX-CK1 Dust Collector 3HP 1PH 230-Volt 2-Micron Canister Kit

Powermatic PM1900TX-CK1 Dust Collector 3HP 1PH 230-Volt 2-Micron Canister Kit

Powermatic PM1900TX-CK1 Dust Collector 3HP 1PH 230-Volt 2-Micron Canister Kit - All-metal duct construction for rigidity and improved air flow. Turbo cone improves chip separation and collector bag packing efficiency. 2-micron canister filters offer over six times filtering surface area of standard bags. The cone eliminates premature filter clogging for sustained performance. Remote-controlled digital timer can be programmed for up to 99 minutes.

 

4 to 225 Inch Cone Reducer ABS Plastic with 4 Inch OD and 225 Inch OD Openings for Dust Collector Systems 73454

4 to 2.25 Inch Cone Reducer ABS Plastic with 4 Inch OD and 2.25 Inch OD Openings for Dust Collector Systems 73454

4 to 2.25 Inch Cone Reducer ABS Plastic with 4 Inch OD and 2.25 Inch OD Openings for Dust Collector Systems 73454 - Can be used to fit 4″ hose to a shop vacuum opening. Has flange to allow easy assembly and disassembly. These reducers allow fitting into a 25″ dust port to a 4″ hose. Smaller end has 2300″ od and 2130″ id larger end has 3980″ od and 3760″ id. Overall height is 65″.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.