Cleveland C25290 Chucking Reamer, Straight Flute, Round Shank, Uncoated (Bright) Finish, 5/32″ Size (Pack of 1)
- Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.
3 Pcs Replacement M5x0.8 HSS Straight Flute Plug Lead Hand Tap Gray
- Product name taper and plug metric tapflute diameter 5mm / 02″. Color graymaterial hss. Thread length 25mm / 1″total length 60mm / 24″. Total weight 24gpackage 3 x taper and plug metric tap. Flute teeth pitch 08mm / 031″shank diameter 44mm / 017″.
.251 Straight Shank Chucking Reamer, Straight Flute, High Speed Steel
- Cutting diameter 0251″. High speed steel. Overall length 6″. Decimal equivalent 02510. Series 112s.
Cle-Force 1699M C69516 M3X0.5 Taper, Plug, and Bottoming Carbon Steel 3 Piece Hand Tap Set , Straight Flute, Straight with Square Shank, Bright (Uncoated) Finish (Pack qty. 1)
- Cle-force 1699m m3x0. Plug hand taps are the most common chamfer for use by hand or machine in through or blind holes. 5 taper, plug, and bottoming carbon steel hand tap set has chamfer lengths of 7-10 threads, 3-5 threads, and 1-2 threads, respectively. Bottoming hand taps are used for threading close to the bottom of blind holes. Taper hand taps are commonly used in through holes.
3/16 (0.1875) Hi-Roc Straight Flute Drill MA Ford 20018750
- Round shank with square end allows tap to be used in hand or power-driven applications. Made in usa. Hand threading tap with straight flutes cuts threads in through holes and blind holes. Extra fine 28 thread per inch. Size1/4″-28 tpi ,high-speed steel for compatibility with a variety of materials.
M3x0.5mm Screw Thread Straight Flutes HSS Machine Metric Plug Tap 4pcs
- Pitch 05mm/ 002″square head size 3 x 3mm/ 012″ x 012″ (lw). Product name machine plug tapflute diameter 3mm/ 012″ (m3)thread length 13mm/ 05″. Net weight 14gpackage content 4x machine plug tap. Shank diameter 4mm/ 016″total length 50mm/ 2″. Color silver tone, gold tonematerial hss.
13/64″ (.2031″) Straight Flute – Solid Carbide Drill
- Designed for drilling hardened, treated and abrasive materials. . These drills penetrate most work pieces easily with minimal deflection.
Morse Cutting Tools 33919 Straight Flute Hand Tap Sets, High-Speed Steel, Bright Finish, H2 Pitch Diameter, 4 Flutes, #8-32 Size
- . Straight flute hand taps are used for hand tapping and machine tapping in through holes or blind holes in a wide variety of materials.
Dormer E513 High-Speed Steel Straight Flute Tap, Uncoated (Bright) Finish, Round Shank With Square End, Bottoming Chamfer, M12-0.75 Thread Size
- High-speed steel for compatibility with a variety of materials. Round shank with square end allows tap to be used in hand or power-driven applications. Uncoated (bright) tools have no additional surface treatment or coating, suitable for general-purpose applications. Hand threading tap with straight flutes cuts threads in through holes and blind holes. Available in metric coarse (m) or metric fine (mf) right-hand thread options for different applications.
Cleveland C25807 Chucking Reamer, Straight Flute, Round Shank, Uncoated (Bright) Finish, 3/8″ Size (Pack of 1)
- Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Round shanks allow use with a wide variety of toolholding systems. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Cobra Carbide 32796 Micro Grain Solid Carbide Jobber Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 140 Degrees Special Point, 31/64″ Size, 3-11/16″ Length (Pack of 1)
- Straight flute drill bits are well suited for drilling in hard materials and are also well-suite to drilling in lathe applications. The added web strength of the straight flutes and special point configuration easily penetrate work pieces with minimal deflection. Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
Kodiak Cutting Tools KCT140270 USA Made Solid Carbide Drill Bit, 2 Straight Flute, 3/4″ Length of Cut, 2″ Overall Length, 1/8″ Diameter
- . 1/8 inch diameter solid carbide drill, straight flute 3/4″ length of cut 2″ overall length 2 flute straight flute drill bit, carbide.
Morse Cutting Tools 33717 Optional Straight Flute Hand Taps, High-Speed Steel, Plug Type, H2 Pitch Diameter, 2 Flutes, #4-40 Size
- Straight flute hand taps are used for hand tapping and machine tapping in through holes or blind holes in a wide variety of materials. .
Drill America DWRRHD Series Qualtech High-Speed Steel Hand Reamer, Straight Flute, Round Shank, Uncoated (Bright) Finish, 5/8″ Size (Pack of 1)
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. A long starting taper is ground into the reamer for easy entry and accurate alignment. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
Kodiak Cutting Tools KCT140358 USA Made Solid Carbide Drill Bit, 2 Straight Flute, 1-1/4″ Length of Cut, 2-1/2″ Overall Length, 1/4″ Diameter
- . 1/4 inch diameter solid carbide drill, straight flute 1-1/4″ length of cut 2-1/2″ overall length 2 flute straight flute drill bit, carbide.
uxcell Woodworking 1/4″ Shank 1/2″ Cutting Dia Double Flute Straight Router Bit
- Package content 1 x straight router bit, 1 x plastic case. Product name router bittype straight type double fluteshank diameter 64mm/ 1/4″. Color silver tone, greennet weight ( not include case) 21g. Bit diameter 127mm/ 1/2″flute length 325mm/ 128″. Total length 69mm/ 272″material metal.
Morse Cutting Tools 29429 Decimal Size Chucking Reamer, High-Speed Steel, Bright Finish, Straight Flute, 6 Flutes, 0.286″ Size
- . Morse precision reamers are designed to enlarge the size of a previously formed hole by a small amount but with a high degree of accuracy to leave smooth sides.
Morse Cutting Tools 33929 Straight Flute Hand Tap Sets, High-Speed Steel, Bright Finish, H3 Pitch Diameter, 4 Flutes, #12-28 Size
- . Straight flute hand taps are used for hand tapping and machine tapping in through holes or blind holes in a wide variety of materials.
M2.5 X 0.45mm 45mm Long Straight Flute Cobalt Spiral Plug Tap
- Flute diameter 25mm/01″(m25) flute length 15mm/06″. Square head size 2 x 2 mm/ 008″ x 008″ (lw) shank diameter 3 mm/012″. Package content 1 x spiral plug tap net weight 5g. Material hss total length 45 mm/18″. Pitch 045mm product name spiral plug tap.
Vermont American 21872 Straight Flute Screw Extractor Set, Red, 5-Piece
- Includes one each of straight screw extractor sizes no 1 through no 5. Required drill size is permanently laser-marked on the shank of each extractor for easy reference. 5-piece straight flute screw extractor set.
Sandvik Coromant ES09KM12 CoroTap 100 Cutting Tap with Straight Flutes, 12 mm x 1.75 mm, Cool Top
- Corotap 100 straight flute m12 taps tool style code es09k tap shank din with driving square pack of 1. .
Bassett DM Series Solid Carbide Stub Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 118 Degrees Four-Facet Point, 1/16″ Size, 1-5/8″ Length (Pack of 1)
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. Applicable for non-ferrous material, cast iron and steel. Straight flute drill bits are well suited for drilling in hard materials and are also well-suite to drilling in lathe applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
Morse Cutting Tools 22354 Metric Chucking Reamer, High-Speed Steel, Bright Finish, Straight Flute/Shank, 4 Flutes, 3.00 mm Size
- . For use in general purpose reaming applications.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
