Drill America DMS Series Bi-Metal Hole Saw, 5-1/4″ Size
- Supports heavy duty cutting with its rugged constitution, which is constructed on tough metal. It cuts faster, smoother without as much vibration as the others due to its variable pitch teeth. Can be used in a wide variety of applications. It needs just one pass to cut through studs. Variable pitch teeth allow for cutting thru any wood, metal or plastic.
Drill America DWT Series Qualtech Carbon Steel Hex Threading Die, M14 x 1.5 Size (Pack of 1)
- Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. No special holder is required for this type of die, any wrench large enough will suffice. Hex die is for dressing over bruised or rusty threads. Made of carbon steel. Ideal for maintenance in the shop or field.
Drill America MMO3/16-2FSE-BN Solid Carbide End Mill, Polished Finish, 2 Flute, Ball End, 5/8″ Cutting Length, 3/16″ Cutting Diameter, 2″ Length, 3/16″ Shank (Pack of 1)
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. Available in polished finish. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 2 flute single end ball.
Drill America KFD Series Killer Force High-Speed Steel Jobber Length Drill Bit, Black/Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/2″ Size (Pack of 6)
- Gold and black surface treated for use in stainless steel and other hard metal drilling. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Heavy duty 135 degree split point. Round shanks allow use with a wide variety of toolholding systems.
Drill America DWT Series Qualtech Carbon Steel Hex Pipe Threading Die, 1/8″-27 NPT (Pack of 1)
- Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Ideal for maintenance in the shop or field. Hex die is for dressing over bruised or rusty threads. No special holder is required for this type of die, any wrench large enough will suffice. Made of carbon steel.
Drill America DWDDRIFTS2 Qualtech Drift Key, #2 Size, 5-1/4″ Length (Pack of 1)
- 2 hole fitting. 5-1/4-inches length. Drill america qualtech drift key for use with #2 morse taper shank drill chuck arbor. #2 size.
Drill America MMO1/32-4FSE Solid Carbide End Mill, Polished Finish, 4 Flute, Square End, 1/8″ Cutting Length, 1/32″ Cutting Diameter, 1-1/2″ Length, 1/8″ Shank (Pack of 1)
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Available in polished finish. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 4 flute single end.
Drill America KFD29J-PC KFD 29-Piece High-Speed Steel Jobber Length Drill Bit Set in Plastic Case, Black/Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/16″ to 1/2″ Size
- Comes in a plastic storage case. Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging. High-speed steel (hss) provides hardness for wear resistance. Assortment of 29 jobber length drill bits includes inch sizes 1/16″ to 1/2″ in 1/64″ increments. Black and gold oxide finish resists corrosion and increases the hardness of the drill bit.
Drill America DWT Series Qualtech High-Speed Steel Hand Threading Tap, Uncoated (Bright) Finish, Round with Square End Shank, Bottoming Chamfer, M16 x 1.5 Size (Pack of 1)
- Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Round shank with square end. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
Drill America DWD13J-LH-SET Qualtech 13 Piece High-Speed Steel Jobber Length Drill Bit Set in Metal Case, Black Oxide Finish, Round Shank, Left Hand Spiral Flute, 118 Degrees Conventional Point (Pack of 1)
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Round shanks allow use with a wide variety of toolholding systems. Reverse-flute drill bits run in the opposite (clockwise) direction from regular drill bits when making holes. 13 piece drill bit set comes in a metal case. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge.
Drill America DWD29J-CO-PC Qualtech 29 Piece Cobalt Steel Jobber Length Drill Bit Set in Plastic Case, Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/16″ to 1/2″ Size
- Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging. Meets ansi specifications. Gold oxide finish lubricates the drill bit and provides wear resistance. Set of 29 jobber length drill bits includes inch sizes 1/16″ to 1/2″ in 1/64″ increments. Cobalt steel provides extended tool life compared to high-speed steel drill bits when drilling hard materials.
Drill America POU1/2NPTW/DRILL Pou 1/2″ Carbon Steel NPT Tap and 23/32″ HSS Drill Bit Set, 1/2″ NPT
- Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads. Set contains matching npt pipe tap and high speed steel drill bit. 1/2″ carbon steel npt tap and 23/32″ hss drill bit with 1/2″ shank. Set comes in plastic pouch. Black oxide drill bit is ideal for production, maintenance or portable drilling jobs.
Drill America DWDMM Series Qualtech High-Speed Steel Jobber Length Drill Bit, Black Oxide Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 13mm Size (Pack of 1)
- Ideal for production, maintenance or portable drilling jobs. Round shanks allow use with a wide variety of toolholding systems. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
Drill America DWT Series Qualtech High-Speed Steel Round Adjustable Threading Die, 1-1/2″ Diameter, 5/8″-24 Size (Pack of 1)
- Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. The slot is beveled. Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Round die is chamfered on both faces.
Drill America DMOCCD Series Solid Carbide Combined Drill Bit and Countersink, Uncoated (Bright) Finish, Round Shank, Spiral Flute, #2 Size, 2″ Length (Pack of 1)
- Used for producing center holes in work pieces which require machining between centers. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems.
Drill America DWD29J-BG-PC Qualtech Economy 29 Piece High-Speed Steel Jobber Length Drill Bit Set in Plastic Case, Black/Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point (Pack of 1)
- 29 piece drill bit set comes in a plastic case. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
Drill America DWD4025-SET Qualtech 25 Piece High-Speed Steel Jobber Length Drill Bit Set in Metal Case, Black Oxide Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 1 mm to 13 mm Size
- 118-degree conventional point for a range of drilling applications. Black oxide finish reduces wear while promoting chip and coolant flow. Meets din specifications. Set of 25 jobber length drill bits includes metric sizes 1 mm to 13 mm in 05 mm increments. High-speed steel (hss) provides hardness for wear resistance.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
