Best 18 Amana Tool Router Bits

 

Amana Tool 54297 Base Moulding Ogee Edge Detail 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank - 19/32-inch cutting height. Cutting diameter 1-7/16-inch. 1/4-inch shank, 2-flute. Carbide tipped, industrial quality. 1/2-inch shank, 2-flute.

 

Amana Tool 45786 Bottom Round 2-Flute Carbide Tipped Router Bit, 3/8-Inch Shank - 3/8-inch shank, 2 flute. 7/16-inch cutting height. Cutting diameter 3/8-inch. Carbide tipped, industrial quality. 3/16-inch radius.

 

Amana Tool 54532 Vertical Raised Panel Traditional Style 2-Flute Carbide Tipped Router Bit, 1-1/8-Inch Diameter by 1/2-Inch Shank - For use only in a table mounted router. Carbide tipped, industrial quality, 1/2-inch shank, 2 flute. Cutting diameter 1-1/8-inch. 1-5/8-inch cutting height. 15-degree angle.

 

Amana Tool 45469 Keller Dovetail Carbide Tipped Router Bit for Keller No. 1641 with Upper Ball Bearing, 1/4-Inch Shank - Specifically designed to match keller number 1641, 7-degree angle. Maximum rpm = 18,000. 19/32-inch upper radius, 5/32-inch lower radius. Cutting diameter 615-inch, 1/2-inch cutting height. 1/4-inch shank, 2-flute carbide tipped, industrial quality.

 

Amana Tool 56116 Raised Panel Groove 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank - Carbide tipped, industrial quality. 1/2-inch cutting height. 30-degree angle. 1/2-inch shank, 2 flute. Cutting diameter 1-1/8-inch.

 

Amana Tool 45524 Panel Pilot 2-Flute Carbide Tipped Router Bit with Two Pilots and Hardened Boring Point, 3/8-Inch Shank - A very useful cutter for motor body building, caravans and boat building. This enables the cutter to be guided by jigs or the inner frame from the top, middle or bottom of the cutter. Carbide tipped with 2 pilots and plunge bit with two pilots and hardened boring point for thicker material, fast cutting.

 

Amana Tool 49643 Bead Stile and Rail 2-Flute Carbide Tipped Router Bit Set, 1/4-Inch Shank, 2-Piece - Includes no49642 bead rail (1-1/4 diameter by 5/16-inch cutting height by 1/4-inch radius with upper ball bearing). Includes no49640 bead stile (1-1/8 diameter by 3/8-inch cutting height by 1/4-inch radius with lower ball bearing). Carbide tipped, industrial quality bead stile and rail set. 1/4-inch shank, 2 flute.

 

Amana Tool 45700 V Groove 2-Flute Carbide Tipped Router Bit, 1/4-Inch Shank - 1/4-inch shank, 2 flute carbide tipped, industrial quality. Cutting diameter 3/8-inch. 90-degree angle. 90-degree v groove bit is for decorative purposes and is not intended for ‘miter-folding’, etc. 3/4-inch cutting height.

 

Amana Tool 51558 Bullnose 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank - Flats at top and bottom of the cutting edges create fillets on stock thicker than the nose diameter. Ideal for shaping stair treads, window sills, table and counter edges, shelves, and making moldings. Must be used with an edge guide on handheld routers or the fence on a router table. Amana 51558 specifications thickness 35/64″ radius 17/64″ carbide height 1″ diameter 1-1/32″ shank 1/2″ length 2-1/2″amana 51558 features shape the full edge of a workpiece with a bullnose radius bit. The “nose diameter” is the thickness of stock that can be nosed, i. , Given a full 180-degree roundover. E.

 

Amana Tool 49673 Classical Stile and Rail 2-Flute Carbide Tipped Router Bit Set, 1/4-Inch Shank, 2-Piece - Includes no49670 classical stile (1-3/32 diameter by 1/2-inch cutting height by 9/64-inch radius with lower ball bearing). 1/4-inch shank, 2 flute. Carbide tipped, industrial quality classical stile and rail set. Includes no49672 classical rail (1-1/4 diameter by 3/8-inch cutting height by 9/64-inch radius with upper ball bearing).

 

SOSS Amana Tool Router Bit for 103IT,203IT, 204IT, 208IT, and 212IT - -Invisible hinge installation accessories. Overall product weight -0. Country of manufacture -united states. 25″. Overall width, side to side -0. Product type -router bit. Overall depth, front to back -0. Application -door hardware. 375″. Dimensions overall height, top to bottom -3. 46259s features -amana tool router bit. 375″. 3 lbs.

 

Amana Tool 45726 V Groove 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank - 1/2-inch shank, 2 flute carbide tipped, industrial quality. Cutting diameter 1-1/4-inch. 90-degree angle. 90-degree v groove bit is for decorative purposes and is not intended for ‘miter-folding’, etc. 7/16-inch cutting height.

 

Amana Tool 45930 Elongated Core Box 2-Flute Extra Deep Carbide Tipped Router Bit, 1/2-Inch Shank - 3/16-inch radius. 1/2-inch shank, 2 flute (extra deep). Carbide tipped, industrial quality. 1-inch cutting height. Cutting diameter 3/8-inch.

 

Amana Tool 45750 V Groove 2-Flute Carbide Tipped Router Bit, 1/4-Inch Shank - With a handheld router, the template must be on top of the workpiece. With a table-mounted router, the template must be on bottom of the workpiece. The shank-mounted ball-bearing pilot rides along the template edge, and the cutter duplicates the template contour in the workpiece. Amana 45750 specifications type “v” groove degree 90° cutting diameter 1/2″ carbide height 1/2″ shank diameter 1/4″ overall length 2″ amana 45750 features designed for fluting and ‘v’ grooving cuts guided by a template or pattern.

 

Amana Tool 53600 Quadraset Adjustable Slotting Assembly 2-Wing Carbide Tipped Router Bit with Ball Bearing Guide, 1/2-Inch Shank - Complete with four cutters (1/8″, 5/32″, 3/16″, 1/4″), arbor, ball bearing guide, spacers, and shims. 0mm) in increments of 1/32″ (0. 1mm). Tongue & groove can also be achieved with proper set-up. Fully diagrammed instructions included for both fractional and metric sizes. 2mm-18. . Amana 53600 specifications depth of cut 1/2″ diameter 1-7/8″ overall length 3″ kerf 1/8″, 23/32″ wings 2 shank 1/2″ amana 53600 features the ‘quadraset’ with its four cutters enables you to cut grooves and dados from 1/8″ through 23/32″ (3.

 

Amana Tool 53620 Duo-Set Adjustable Slotting Assembly 2-Wing Carbide Tipped Router Bit with Ball Bearing Guide, 1/2-Inch Shank - 1/2-inch shank, 2-wing. 1/8-inch to 3/16-inch cutting height. Carbide tipped, industrial quality. Cutting diameter 1-31/32-inch.

 

Amana Tool 45788 Lettering 60-Degree 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank - For use in hardwood, softwood, plywood and composition material. Designed for routing signs. The 60° cutting angle expels excess material quickly and eliminates chipping and splintering.

 

Amana Tool 45650 Key Hole Shank Single Flute Carbide Tipped Router Bit, 1/4-Inch - . Amana 45650 specifications large diameter 3/8″ cutting depth 3/8″ shank diameter 1/4″ overall length 1-1/2″amana 45650 features used for cutting keyhole slots in plaques, picture frames and other wall hanging items.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.