Best 17 Supertools

 

TC105NF by Supertool

TC105NF by Supertool

TC105NF by Supertool - Crimps and flattens clamps on ear type cv joint boot clamps. To be used with any banding up to 10mm in width. Comfortable double dipped handles. Tc105nf. Standard banding tool for cv joint boots.

 

SUPERTOOLS 100MM Mini Trim Clip Removal Pliers TP1200

SUPERTOOLS 100MM Mini Trim Clip Removal Pliers TP1200

SUPERTOOLS 100MM Mini Trim Clip Removal Pliers TP1200 - Small size makes them ideal where access is limited. Glass reinforced nylon trim clip removal pliers with spring-loaded handles. Length 100mm.

 

Supertool SCC05 Screw Cam Clamp

Supertool SCC0.5 Screw Cam Clamp

Supertool SCC0.5 Screw Cam Clamp - High-frequency quenching of special alloy steels gives greater durability to the cam. This clamp is equipped with a screw cam (spherical universal designed), which provides an extra powerful clamping force on the work piece at no load and even when vibrations occur during operation. The cam and the pad can be easily replaced. Universal clamp for lifting of a large variety of different shaped steel, ranging from steel plates and structured steel to curved and spherical shaped steels. The main body is made from the die-forging of special alloy steels in one piece, which is optimally tempered for maximum strength and durability.

 

SUPERTOOLS 110-170mm 2 Leg Fuel Sender Tank 24mm Hex Spanner Wrench Tool TP0118

SUPERTOOLS 110-170mm 2 Leg Fuel Sender Tank 24mm Hex Spanner Wrench Tool TP0118

SUPERTOOLS 110-170mm 2 Leg Fuel Sender Tank 24mm Hex Spanner Wrench Tool TP0118 - Drive 24mm hex legs 2 capacity 110-170mm. For removing and refitting fuel tank sender mounting rings.

 

SUPERTOOLS M6 X 10 X 80MM Thread Helical Coil Repair Tool Kit TP1059B

SUPERTOOLS M6 X 1.0 X 8.0MM Thread Helical Coil Repair Tool Kit TP1059B

SUPERTOOLS M6 X 1.0 X 8.0MM Thread Helical Coil Repair Tool Kit TP1059B - 10 off wire thread inserts 8. Ideal for restoring damaged threads, suitable for engine repair and otherautomotive applications for steel, cast iron and aluminium. 0mm long 1 off drill bit 1 off break pin tool 1 off twist key 1 off hex key 1 off tap. Thread repair kit including wire thread insert sizes m6.

 

SUPERTOOLS 25PCS Screw Extractor Drill Guide Removal Broken Bolts Fastners Easy Out Set TP1237

SUPERTOOLS 25PCS Screw Extractor Drill & Guide Removal Broken Bolts Fastners Easy Out Set TP1237

SUPERTOOLS 25PCS Screw Extractor Drill & Guide Removal Broken Bolts Fastners Easy Out Set TP1237 - 35mm) n4, 5/16″ (7. 73mm). 76mm) g6, dia 7/16″ (11. 175mm) g3, dia 11/32″ (8. 53mm) drill 1/8″ (3. 29mm) drill 1/4″ (6. Extracts screw and bolts, can be used on thread sizes from 5 to 16mm removes breaking fastener without breaking or jamming turns broken fasteners out and allows higher torque without expansion include 5pcs hss drill bits 1/8″ (3. 175mm) g2, dia 5/16″ (7. 32mm) drill 3/16″ (4. 11mm) drill 3/16″ (4. 76mm) n3, 1/4″ (6. 35mm), 5/16″ (7. 94mm) n5, 11/32″ (8. 70mm) drill 3/16″ (4. 92), 11/32″ (8. 35mm) g10, dia 9/16″ (14. 76mm) g7, dia 15/32″ (11. 73mm) 5pcs extractor pins #1, #2, #3, #4, #5 10pcs drilling guide g1, dia 9/32″ (7. 73mm) drill 1/8″ (3. 76mm) g8, dia 1/2″ (12. 175mm), 3/16″ (4. 175mm) n2, 3/16″ (4. 175mm) g5, dia 13/32″ (10. 175mm) g4, dia 3/8″ (9. 14mm) drill 1/8″ (3. 91mm) drill 3/16″ (4. 76mm) g9, dia 17/32″ (13. 49mm) drill 1/4″ (6. 35mm) 5pcs extractor nut n1, 1/8″ (3. 76mm), 1/4″ (6. 94mm) drill 1/8″ (3.

 

SUPERTOOLS 75-160mm 3 Leg Fuel Sender Tank 24mm Hex Spanner Wrench Tool TP1119

SUPERTOOLS 75-160mm 3 Leg Fuel Sender Tank 24mm Hex Spanner Wrench Tool TP1119

SUPERTOOLS 75-160mm 3 Leg Fuel Sender Tank 24mm Hex Spanner Wrench Tool TP1119 - Drive 24mm hex legs 3 capacity 75-160mm. For removing and refitting fuel tank sender mounting rings.

 

AB3N by Supertool

AB3N by Supertool

AB3N by Supertool - Supertool nk-m10 10 mm threaded rod cutter. Includes leatherman 931014 42-bit assortment for leatherman bit drivers. Includes leather combination sheath. Factory gear shop only dealing with high-quality tools from all over the world. Includes 2 pliers, wire cutters, 2 knives, saw, scissors, 2 files, 2 drivers, bottle opener and more.

 

SUPERTOOLS Universal Hose Clip Pliers Clic And Clic R Type Collars TP1173

SUPERTOOLS Universal Hose Clip Pliers Clic And Clic R Type Collars TP1173

SUPERTOOLS Universal Hose Clip Pliers Clic And Clic R Type Collars TP1173 - Plastic covered handles for comfort and grip when using this application. Heavy duty spring loaded pliers for fitting and removing clic and clic r hose clips. Special jaw allows the change from fit to remove simply by turning the pliers over. Suitable for releasing and refitting re-useable clic and clic r hose clips. Single rivet design so nothing can really go wrong with them.

 

Leatherman SUPERTOOL 300 sheath

Leatherman SUPERTOOL 300 sheath

Leatherman SUPERTOOL 300 sheath - We also offer a tactical line for the same product in our other listing. This holder is 100% made in the usa this light weight tactical model is for the supertool 300 multi-tool with a heavy duty spring steel belt clip. These holders were designed for law enforcement and military applications that require easy 1 finger removal and securely holds the tool in place during heavy activity.

 

SUPERTOOLS 12 Inch Torque Wrench Angle Gauge TP1136

SUPERTOOLS 1/2 Inch Torque Wrench Angle Gauge TP1136

SUPERTOOLS 1/2 Inch Torque Wrench Angle Gauge TP1136 - Easily zeroed for next application by turning the tool housing. 360 degree scale is marked at 2 degree increments & intervals of 10 degree and 30 degree. Measures angle of rotation after pre-torque in torque-angle application. 1/2″ male & female square drive and an adjustable holding rod hold the gauge in position during use.

 

SUPERTOOLS MERCEDES BENZ BMW Fan Clutch Holder Wrench Service Tool Kit TP1204

SUPERTOOLS MERCEDES BENZ BMW Fan Clutch Holder Wrench Service Tool Kit TP1204

SUPERTOOLS MERCEDES BENZ BMW Fan Clutch Holder Wrench Service Tool Kit TP1204 - 6+7) bmw double water pump tool this special tool covers most popular applications used for securing water pump hub from rotating during r & r of fan clutch nut applicable bmw m10, m20, m30, m40, m41, m42, m50, m60, m62. 2) locking hook needed for securing the visco fan coupling during r&r of 8mm hex fastener w/o removing the radiator mercedes m103. 1) hub securing bar 113-0040 used for securing water pump hub from rotating during r&r of fan clutch nut this holder bolts onto the hub, as the poly v-belt is not in place and cannot be used to lock the hub applicable mercedes m112 & m113. 3+4) wrench / holding bar this is similar to benz number 900-589-0307-00 comes complete with 8 and 10mm allen bits the 8mm is needed for r&r of fan clutch fastener applicable mercedes m103, 104, 111, 119, 120 om 602, 603, 605, 606 the 10mm is used for adjusting a/c belt tension and r&r of idler pulley models 420, 560 with v-819 86 and newer. 5) thin wrench 65mm with an 8mm overall thickness and an overall length of 16 inches for proper leverage mercedes ref 120-589-0201-00 applicable mercedes m103 (6 cyl , m104 (6 cyl 4 vlv),m119 (8 cyl 4 vlv) m120 (12 cyl 4 vlv).

 

Supertool NK-M10 10 mm Threaded Rod Cutter by SUPER TOOL

Supertool NK-M10 10 mm Threaded Rod Cutter by SUPER TOOL

Supertool NK-M10 10 mm Threaded Rod Cutter by SUPER TOOL - Supertool nk-m10 10 mm threaded rod cutter. Includes leatherman 931014 42-bit assortment for leatherman bit drivers. Factory gear shop only dealing with high-quality tools from all over the world. Includes leather combination sheath. Includes 2 pliers, wire cutters, 2 knives, saw, scissors, 2 files, 2 drivers, bottle opener and more.

 

Supertool Screw adjusted Cam Clamp SAC SCC15 15 TON

Supertool Screw adjusted Cam Clamp SAC/ SCC1.5 (1.5 TON)

Supertool Screw adjusted Cam Clamp SAC/ SCC1.5 (1.5 TON) - This clamp is equipped with a screw cam (spherical universal designed), which provides an extra powerful clamping force on the work piece at no load and even when vibrations occur during operation. The cam and the pad can be easily replaced. The main body is made from the die-forging of special alloy steels in one piece, which is optimally tempered for maximum strength and durability. Universal clamp for lifting of a large variety of different shaped steel, ranging from steel plates and structured steel to curved and spherical shaped steels. This omni, directional clamp can lift, hang, turn over, and pull steel structures.

 

CO-64 Utility Knife or Supertool Holster

CO-64 Utility Knife or Supertool Holster

CO-64 Utility Knife or Supertool Holster - This clamp is equipped with a screw cam (spherical universal designed), which provides an extra powerful clamping force on the work piece at no load and even when vibrations occur during operation. This omni, directional clamp can lift, hang, turn over, and pull steel structures. The cam and the pad can be easily replaced. Universal clamp for lifting of a large variety of different shaped steel, ranging from steel plates and structured steel to curved and spherical shaped steels. The main body is made from the die-forging of special alloy steels in one piece, which is optimally tempered for maximum strength and durability.

 

SUPERTOOLS 2FT Flexible Wire Long Reach Hose Clamp Pliers For Fuel Oil Water Hose TP1019

SUPERTOOLS 2FT Flexible Wire Long Reach Hose Clamp Pliers For Fuel Oil Water Hose TP1019

SUPERTOOLS 2FT Flexible Wire Long Reach Hose Clamp Pliers For Fuel Oil Water Hose TP1019 - Long reach 2ft. Clamp metal 1-1/4″ plate, plastic self tensioned clips. Suitable for metal, plastic metal and self tightening tensioned hose clamps with diameters of 18mm-54mm. For the removal and locking of clamps into open position(not for truck). Hose clamps max opening 1-1/2″.

 

SUPERTOOLS CV Joint Boot Clamp Pliers Set 2PCS TP1231

SUPERTOOLS CV Joint Boot Clamp Pliers Set 2PCS TP1231

SUPERTOOLS CV Joint Boot Clamp Pliers Set 2PCS TP1231 - Crimps and flattens clamps on ear type cv joint boot clamps. Comfortable double dipped handles. To be used with any banding up to 10mm in width. Cv boot & hose clamp pliers ear type. Standard banding tool for cv joint boots.