Best 16 Thread Sizes

 

18-8 Stainless Steel Prairie Bolt Plain Finish Flange Socket Cap Head Hex Socket Drive 10-32 Thread Size 0190 Shoulder Diameter 1-18 Grip Length Made in US Pack of 1

18-8 Stainless Steel Prairie Bolt, Plain Finish, Flange Socket Cap Head, Hex Socket Drive, #10-32 Thread Size, 0.190″ Shoulder Diameter, 1-1/8″ Grip Length, Made in US (Pack of 1)

18-8 Stainless Steel Prairie Bolt, Plain Finish, Flange Socket Cap Head, Hex Socket Drive, #10-32 Thread Size, 0.190″ Shoulder Diameter, 1-1/8″ Grip Length, Made in US (Pack of 1) - 18-8 stainless steel provides good corrosion resistance and strength, while the plain surface has no finish or coating. Designed with unthreaded grip length to fit the thickness of material being fastened and protect it from thread damage. Hex socket drive has a hexagonal slot that turns using an allen key driver. Flange socket cap head is round with a flat top and high profile that provides high strength and has a flange that acts as a washer for use with thin or soft materials. Made in usa.

 

Steel Thread Cutting Screw Zinc Plated 82 Degree Flat Head Phillips Drive Type F 516-18 Thread Size 1 Length Pack of 25

Steel Thread Cutting Screw, Zinc Plated, 82 Degree Flat Head, Phillips Drive, Type F, 5/16″-18 Thread Size, 1″ Length (Pack of 25)

Steel Thread Cutting Screw, Zinc Plated, 82 Degree Flat Head, Phillips Drive, Type F, 5/16″-18 Thread Size, 1″ Length (Pack of 25) - Steel is often used in applications where strength is the primary consideration. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Zinc plating resists corrosion and has a reflective appearance. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface.

 

Steel Pan Head Machine Screw Zinc Plated Meets JIS B1111 2 Phillips Drive M4-07 Thread Size 25 mm Length Fully Threaded Imported Pack of 25

Steel Pan Head Machine Screw, Zinc Plated, Meets JIS B1111, #2 Phillips Drive, M4-0.7 Thread Size, 25 mm Length, Fully Threaded, Imported (Pack of 25)

Steel Pan Head Machine Screw, Zinc Plated, Meets JIS B1111, #2 Phillips Drive, M4-0.7 Thread Size, 25 mm Length, Fully Threaded, Imported (Pack of 25) - Steel is often used in applications where strength is the primary consideration, and the black oxide finish offers mild corrosion resistance and lubricity. Slotted drive has a linear slot for use with a flat-blade driver. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Hex washer head has six flat sides that a wrench can grip from the side in low-profile applications and has a flange for additional bearing surface to distribute the force over the material being fastened.

 

Steel Self-Drilling Screw Zinc Plated Finish Pan Head Star Drive 2 Drill Point 6-20 Thread Size 34 Length Pack of 100

Steel Self-Drilling Screw, Zinc Plated Finish, Pan Head, Star Drive, #2 Drill Point, #6-20 Thread Size, 3/4″ Length (Pack of 100)

Steel Self-Drilling Screw, Zinc Plated Finish, Pan Head, Star Drive, #2 Drill Point, #6-20 Thread Size, 3/4″ Length (Pack of 100) - Steel is often used in applications where strength is the primary consideration. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive. Pan head has a flat top and short vertical sides with a rounded top edge. Zinc plating resists corrosion and has a reflective appearance.

 

Steel Sheet Metal Screw Zinc Plated Hex Washer Head Slotted Drive Type AB 6-20 Thread Size 12 Length Pack of 100

Steel Sheet Metal Screw, Zinc Plated, Hex Washer Head, Slotted Drive, Type AB, #6-20 Thread Size, 1/2″ Length (Pack of 100)

Steel Sheet Metal Screw, Zinc Plated, Hex Washer Head, Slotted Drive, Type AB, #6-20 Thread Size, 1/2″ Length (Pack of 100) - Steel is often used in applications where strength is the primary consideration, and the zinc plating resists corrosion and has a reflective appearance. Hex washer head has six flat sides that a wrench can grip from the side in low-profile applications and has a flange for additional bearing surface to distribute the force over the material being fastened. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Slotted drive has a linear slot for use with a flat-blade driver.

 

Steel Sheet Metal Screw Black Oxide Finish Truss Head Phillips Drive Type A 6-18 Thread Size 34 Length Pack of 100

Steel Sheet Metal Screw, Black Oxide Finish, Truss Head, Phillips Drive, Type A, #6-18 Thread Size, 3/4″ Length (Pack of 100)

Steel Sheet Metal Screw, Black Oxide Finish, Truss Head, Phillips Drive, Type A, #6-18 Thread Size, 3/4″ Length (Pack of 100) - Type a point has a conical tip and spaced threads that are suitable for forming threads in holes drilled in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Steel is often used in applications where strength is the primary consideration, and the black oxide finish offers mild corrosion resistance and lubricity. Truss head has an extra-wide low-profile domed shape for applications with minimal clearance. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.

 

Steel Sheet Metal Screw Zinc Plated Hex Washer Head Slotted Drive Type AB 6-20 Thread Size 38 Length Pack of 100

Steel Sheet Metal Screw, Zinc Plated, Hex Washer Head, Slotted Drive, Type AB, #6-20 Thread Size, 3/8″ Length (Pack of 100)

Steel Sheet Metal Screw, Zinc Plated, Hex Washer Head, Slotted Drive, Type AB, #6-20 Thread Size, 3/8″ Length (Pack of 100) - Steel is often used in applications where strength is the primary consideration, and the zinc plating resists corrosion and has a reflective appearance. Slotted drive has a linear slot for use with a flat-blade driver. Hex washer head has six flat sides that a wrench can grip from the side in low-profile applications and has a flange for additional bearing surface to distribute the force over the material being fastened. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood.

 

Steel Self-Drilling Screw Zinc Plated Finish Modified Truss Head Phillips Drive 2 Drill Point 8-18 Thread Size 34 Length Pack of 100

Steel Self-Drilling Screw, Zinc Plated Finish, Modified Truss Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 3/4″ Length (Pack of 100)

Steel Self-Drilling Screw, Zinc Plated Finish, Modified Truss Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 3/4″ Length (Pack of 100) - Zinc plating resists corrosion and has a reflective appearance. Steel is often used in applications where strength is the primary consideration. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Modified truss head is extra wide with a low-profile dome and integral round washer.

 

Steel Pan Head Machine Screw Black Oxide Finish Meets ASME B1863 1 Phillips Drive 4-40 Thread Size 14 Length Fully Threaded Import Pack of 100

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #1 Phillips Drive, #4-40 Thread Size, 1/4″ Length, Fully Threaded, Import (Pack of 100)

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #1 Phillips Drive, #4-40 Thread Size, 1/4″ Length, Fully Threaded, Import (Pack of 100) - Pan head has a flat top and short vertical sides with a rounded top edge. Steel is often used in applications where strength is the primary consideration, and the black oxide finish offers mild corrosion resistance and lubricity. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.

 

Nylon 66 Hex Nut Black 14-20 Thread Size 716 Width Across Flats 1564 Thick Pack of 100

Nylon 6/6 Hex Nut, Black, 1/4″-20 Thread Size, 7/16″ Width Across Flats, 15/64″ Thick (Pack of 100)

Nylon 6/6 Hex Nut, Black, 1/4″-20 Thread Size, 7/16″ Width Across Flats, 15/64″ Thick (Pack of 100) - The material is a strong yet lightweight plastic and is nonconductive. Others, such as eye nuts, thumb nuts, and wing nuts, can be tightened by hand. Several different nut styles fit a variety of application and installation requirements. Some styles, such as hex nuts, acorn nuts, flange nuts, and coupling nuts, must be tightened with a tool. Nylon 6/6 provides resistance to abrasion, corrosion, and many chemicals and solvents. It has six flat sides that a wrench can grip to turn from the side, enabling use when there is no space above the nut. Some nuts have a self-locking mechanism, such as a nylon patch or distorted threads, that makes them suitable for applications with a high amount of vibration. The nylon 6/6 hex nut has a black color. Nuts are internally threaded fasteners that are used with bolts and threaded rods and studs to connect components. Nylon 6/6 can either absorb or lose moisture, which may alter its dimensions and mechanical properties.

 

Steel Pan Head Machine Screw Black Oxide Finish Meets ASME B1863 2 Phillips Drive 8-32 Thread Size 12 Length Fully Threaded Import Pack of 100

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #8-32 Thread Size, 1/2″ Length, Fully Threaded, Import (Pack of 100)

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #8-32 Thread Size, 1/2″ Length, Fully Threaded, Import (Pack of 100) - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools. Round shanks allow use with a wide variety of toolholding systems. 03125-inches thread length. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.

 

Steel Pan Head Machine Screw Zinc Plated Meets JIS B1111 2 Phillips Drive M4-07 Thread Size 20 mm Length Fully Threaded Imported Pack of 25

Steel Pan Head Machine Screw, Zinc Plated, Meets JIS B1111, #2 Phillips Drive, M4-0.7 Thread Size, 20 mm Length, Fully Threaded, Imported (Pack of 25)

Steel Pan Head Machine Screw, Zinc Plated, Meets JIS B1111, #2 Phillips Drive, M4-0.7 Thread Size, 20 mm Length, Fully Threaded, Imported (Pack of 25) - Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive. Zinc plating resists corrosion and has a reflective appearance. Wafer head has a flat top, a 70-degree cone-shaped bearing surface, and a small slope between the top and the bearing surface. Steel is often used in applications where strength is the primary consideration.

 

Steel Sheet Metal Screw Black Oxide Finish  Pan Head Phillips Drive Type AB 10-16 Thread Size 34 Length Pack of 100

Steel Sheet Metal Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type AB, #10-16 Thread Size, 3/4″ Length (Pack of 100)

Steel Sheet Metal Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type AB, #10-16 Thread Size, 3/4″ Length (Pack of 100) - Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Steel is often used in applications where strength is the primary consideration, and the black oxide finish offers mild corrosion resistance and lubricity. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Pan head has a flat top and short vertical sides with a rounded top edge.

 

Steel Pan Head Machine Screw Black Oxide Finish Meets ASME B1863 2 Phillips Drive 10-32 Thread Size 1 Length Fully Threaded Import Pack of 100

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-32 Thread Size, 1″ Length, Fully Threaded, Import (Pack of 100)

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-32 Thread Size, 1″ Length, Fully Threaded, Import (Pack of 100) - Flange socket cap head is round with a flat top and high profile that provides high strength and has a flange that acts as a washer for use with thin or soft materials. Designed with unthreaded grip length to fit the thickness of material being fastened and protect it from thread damage. Made in usa. 18-8 stainless steel provides good corrosion resistance and strength, while the plain surface has no finish or coating. Hex socket drive has a hexagonal slot that turns using an allen key driver.

 

18-8 Stainless Steel Sheet Metal Screw Plain Finish Truss Head Phillips Drive Type A 8-15 Thread Size 34 Length Pack of 100

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Truss Head, Phillips Drive, Type A, #8-15 Thread Size, 3/4″ Length (Pack of 100)

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Truss Head, Phillips Drive, Type A, #8-15 Thread Size, 3/4″ Length (Pack of 100) - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Truss head has an extra-wide low-profile domed shape for applications with minimal clearance. 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating. Type a point has a conical tip and spaced threads that are suitable for forming threads in holes drilled in thin metals between 0015″ and 0050″ thick and resin impregnated plywood.

 

Walter Enduro-Flex Turbo Abrasive Flap Disc Type 29 58-11 Thread Size Plastic Backing Ceramic 4-12 Diameter Grit 3660 Pack of 10

Walter Enduro-Flex Turbo Abrasive Flap Disc, Type 29, 5/8″-11 Thread Size, Plastic Backing, Ceramic, 4-1/2″ Diameter, Grit 36/60 (Pack of 10)

Walter Enduro-Flex Turbo Abrasive Flap Disc, Type 29, 5/8″-11 Thread Size, Plastic Backing, Ceramic, 4-1/2″ Diameter, Grit 36/60 (Pack of 10) - Great for stock removal, edge breaking and blending applications. Aggressive grinding thanks to cyclone technology (exclusive abrasive grain blend). Runs cool due to turbofan backing pad design. Safe to use on all metals, including stainless steel, aluminum and other sensitive alloys. Long life and high overall material removal.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.