GearWrench 80660 1/2-Inch Drive Hex Bit Socket 10mm
- Long lasting nickel chrome and black oxide finishes. Best quality heat treated steel. Hex head internal dimple retention feature force bit surface to opposite side for maximum retention. Sizes hard stamped on body of socket for easy identification of size.
ARP 761-1003 Stainless Steel M8 x 1.25 Thread 30mm UHL 6-Point Bolt with 10mm Socket and Washer, (Set of 5), Model: 761-1003, Car & Vehicle Accessories / Parts
- Made in the usa. Suregrip hex design drives the side of the fastener, not the corner. Includes metal organizer rail. Bolt, 8 mm x 125 thread. Patented superkrome finish for durability and maximum corrosion resistance.
SODIAL(R) 2Pcs 1/4 Shank Magnetic 10mm Socket Wrench Hex Nut Driver Bit
- Our products will enhance your experience to unparalleled inspiration. Sodial is a registered trademark. Magnetic hex nut drivers are used in manufacturing assembly systems and others. Sodial(r) 2pcs 1/4 shank magnetic 10mm socket wrench hex nut driver bitdescription the bell-shape and magnetic hex insert allow the bit to hold the bit securely in place for quicker installations. Only authorized seller of sodial can sell under sodial listings. Magnetic hex nut drivers designed and engined for long life and good durability for operating. .
GreatNeck 2070 6 Point 10mm Drive Socket, 1/2 Inch
- Torque is applied to the walls of the fastener head. The socket is constructed from high carbon steel and high quality chrome vanadium steel for strength, durability, and resistance to corrosion. The socket wall design provides superior gripping power without rounding the fastener points. An identification stamp shows size and brand for faster socket selection. The great neck 1/2 drive 10mm socket features posi-grip no slip design.
10mm Socket Button Head Setscrews M10 x 80mm A2 Stainless Steel Socket Allen Key Dome Head Bolt Free Allen Key, Nuts and Washers by AHC
- 10mm socket button head setscrews m10 x 80mm a2 stainless steel socket allen key dome head bolt free allen key, nuts and washers. M10 x 80mm.
2.5 x 10mm Socket Head Cap Screw 10pcs Class 12.9 Hard Alloy Steel
- Class 129 socket cap screws are comparable, but not e x actly equivalent to us alloy steel socket cap screws ideal for precision assembly work with close tolerances and applications needing a well-tooled appearance supplies greater tensile strength than equivalent sizes of class 88 or 109 hex head cap screws while requiring less surface area or conterbore since the fastener is internally wrenched. Class 129 socket cap screws shall be made from an alloy steel which conforms to the following chemical composition requirements, carbon 020-050% phosphorous 0035% ma x imum sulfur 0035% ma x imum and one or more of chromium, nickel, molybdenum or vanadium. Externally threaded fastener with metric threads, a cylindrical head with a flat chamfered top surface, knurled cylindrical sides and hex agonal recess, made from alloy steel.
M4-0.70 x 10 MM SOCKET HEAD CAP SCREWS COARSE STAIN A2 (18-8)|Full Thread|Size: M4-0.70|Length: 10mm|Head: Socket Cap|Drive: Internal Hex|Stainless Steel A2|Plain|Thread: UNC (Metric) (Quantity: 100)
- Jet fitting & supply corporation has been providing fasteners since 1946 feel safe when buying from jet. Jet fitting & supply corporation has been providing fasteners since 1946 feel safe when buying from jet. Jet fitting & supply corporation has been providing fasteners since 1946 feel safe when buying from jet. Jet fitting & supply corporation has been providing fasteners since 1946 feel safe when buying from jet. Jet fitting & supply corporation has been providing fasteners since 1946 feel safe when buying from jet.
Craftsman® 9-2317 10mm Socket 6 Pt., Deep, Metric, 3/8″ Drive
- New, craftsman 10mm socket 6 pt, deep, metric, 3/8″ drive. Designed with chamfered and recessed leading edges to provide the most positive fit possible. Forged from chrome vanadium alloy steel, nickel-chrome plated for corrosion resistance and durability. Craftsman 3/8″ drive 10mm socket 12 pt, deep.
M2-0.40 x 10MM Socket Head Cap Screws, Allen Socket Drive, Din 912, Stainless Steel 304, Full Thread, Bright Finish, Machine Thread, Quantity 100
- Head height 2 mm. Allen hex drive size 15 mm. Thread diameter 2 mm. Head diameter 38 mm. A2-70 stainless, which is a grade 304 stainless steel with a 700 n/mm2 tensile strength the -70 represents the tensile strength divided by 10 type 304 stainless steel is an austenitic steel possessing a minimum of 18% chromium and 8% nickel, combined with a maximum of 008% carbon the 18% minimum chromium provides excellent corrosion and oxidation resistance.
M5-0.80 x 10 MM SOCKET HEAD CAP SCREWS COARSE STAIN A2 (18-8)|Full Thread|Size: M5-0.80|Length: 10mm|Head: Socket Cap|Drive: Internal Hex|Stainless Steel A2|Plain|Thread: UNC (Metric) (Quantity: 100)
- Jet fitting & supply corporation has been providing fasteners since 1946 feel safe when buying from jet. Jet fitting & supply corporation has been providing fasteners since 1946 feel safe when buying from jet. Jet fitting & supply corporation has been providing fasteners since 1946 feel safe when buying from jet. Jet fitting & supply corporation has been providing fasteners since 1946 feel safe when buying from jet. Jet fitting & supply corporation has been providing fasteners since 1946 feel safe when buying from jet.
M10-1.50 x 10MM Socket Set Screws, Allen Socket Drive, Din 916, Stainless Steel A2, Full Thread, Bright Finish, Cup Point, Quantity 25
- Thread diameter 10 mm. Allen hex drive size 5 mm. A cup point surface is rounded so that a small surface area is in contact, but it does not have extremely high stress at one point like that of a cone point durability studies show that the cup point offers superior resistance to wear while maintaining a strong grip. 18-8 stainless steel provides strength and offers good corrosion resistance in many environments. Also referred to as a grub screw.
M3-0.50 x 10MM Socket Head Cap Screws, Allen Socket Drive, Din 912, Stainless Steel 304, Full Thread, Bright Finish, Machine Thread, Quantity 100
- A2-70 stainless, which is a grade 304 stainless steel with a 700 n/mm2 tensile strength the -70 represents the tensile strength divided by 10 type 304 stainless steel is an austenitic steel possessing a minimum of 18% chromium and 8% nickel, combined with a maximum of 008% carbon the 18% minimum chromium provides excellent corrosion and oxidation resistance. Head diameter 55 mm. Head height 3 mm. Allen hex drive size 25 mm. Thread diameter 3 mm.
80/20 Inc., 11-5510, 20 Series, Metric M5 x 0.8 10mm Socket Head Cap Screw (SHCS) (15 Pack)
- Socket head cap screw. Black zinc. M5 thread.
M3-0.50 x 10 MM SOCKET HEAD CAP SCREWS COARSE STAIN A2 (18-8)|Full Thread|Size: M3-0.50|Length: 10mm|Head: Socket Cap|Drive: Internal Hex|Stainless Steel A2|Plain|Thread: UNC (Metric) (Quantity: 100)
- Jet fitting & supply corporation has been providing fasteners since 1946 feel safe when buying from jet. Tough and reliable 21-piece 1/2-inch drive deep metric socket set. Jet fitting & supply corporation has been providing fasteners since 1946 feel safe when buying from jet. Patented superkrome finish for durability and maximum corrosion resistance. Jet fitting & supply corporation has been providing fasteners since 1946 feel safe when buying from jet.
3 x 10mm Socket Head Cap Screw 10pcs Class 12.9 Hard Alloy Steel
- Class 129 socket cap screws are comparable, but not e x actly equivalent to us alloy steel socket cap screws ideal for precision assembly work with close tolerances and applications needing a well-tooled appearance supplies greater tensile strength than equivalent sizes of class 88 or 109 hex head cap screws while requiring less surface area or conterbore since the fastener is internally wrenched. Class 129 socket cap screws shall be made from an alloy steel which conforms to the following chemical composition requirements, carbon 020-050% phosphorous 0035% ma x imum sulfur 0035% ma x imum and one or more of chromium, nickel, molybdenum or vanadium. Externally threaded fastener with metric threads, a cylindrical head with a flat chamfered top surface, knurled cylindrical sides and hex agonal recess, made from alloy steel.
1/4 Inch Hex Shank 10mm Socket Magnetic Nut Driver Bit Setter 5pcs
- Overall size 65 x 15mm/26″ x 06″ (ld) socket type 6 point hex socket. Features magnetic main color gray. Main material metal package content 5 x magnetic nut setter. Product name magnetic nut setter weight 180g. Hex size 10mm/ 04″ shank size 63mm/1/4″.
Performance Tool W38810 12-Point Socket, 3/8″ Drive, 10mm
- Polished nickel chrome plated finish resists corrosion. Lifetime warranty. Large stamping for quick identification. Performance tool w38810 size 3/8″ drive 12-point socket, 10mm socket openings are designed to reduce fastener rounding. Chrome vanadium alloy steel construction for strength and durability.
M3-0.50 x 10 MM SOCKET HEAD CAP SCREWS 12.9 COARSE ALLOY ZINC-BAKE CR+6 | Full Thread |Size: M3-0.50|Length: 10mm|Head: Socket Cap|Drive: Internal Hex|Steel|Zinc|Thread: UNC (Metric) (Quantity: 100)
- Jet fitting & supply corporation has been providing fasteners since 1946 feel safe when buying from jet. Jet fitting & supply corporation has been providing fasteners since 1946 feel safe when buying from jet. Jet fitting & supply corporation has been providing fasteners since 1946 feel safe when buying from jet. Jet fitting & supply corporation has been providing fasteners since 1946 feel safe when buying from jet. Jet fitting & supply corporation has been providing fasteners since 1946 feel safe when buying from jet.
Pro-Grade 13710 3/8-Inch Drive with 6 Point Deep 10mm Socket
- All sockets feature the dyna-drive torque system which allows the application up to 20% more driving torque, with no slippage or fastener damage. Forged from chrome vanadium alloy steel, nickel-chrome plated for corrosion resistance and durability. Limited lifetime warranty. Designed with chamfered and recessed leading edges to provide the most positive fit possible.
TRUECRAFT 1/4″ Drive 10mm 12 Point Socket
- Armstrong combination wrench, size 5/16″, length 5. 75″, finish full polish, material steel, style 12 point, type combination open end box end wrench.
Uxcell 65mm Long Hex Magnetic Power 10mm Socket Nut Driver Setters, 5-Piece
- Allow your workers to accomplish work faster and more efficient these hex socket bits are ideal for construction workers, carpenters, home custom installers, etches allows for much more efficiency, control and fewer chances of scratching things using the traditional hex key wrench. These hex socket bit feature magnet for holding the screws in place, one hand operated. .
Metric M2.5 X 10mm Socket Head Cap Screw; Black; Pack of 10
- 5mm diameter), 0. Din 912 black oxide or black burnished finish provides minor corrosion resistance recommended for indoor or weatherproof applications. 5 (2. Alloy steel socket head cap screw m2. 45mm (thread pitch) x 10mm (length) class 12. Note picture is for identification purposes only and should not be used for scaling of screw diameter, length, head dimensions, wrench size, or any other dimensions of screw. Refer to description above for all dimensions. 9 (comparable to standard grade 8) suitable for all high strength screw applications.
M6-1.00 x 10MM Socket Set Screws, Allen Socket Drive, Din 916, Stainless Steel A2, Full Thread, Bright Finish, Cup Point, Quantity 50
- Thread diameter 6 mm. Also referred to as a grub screw. A cup point surface is rounded so that a small surface area is in contact, but it does not have extremely high stress at one point like that of a cone point durability studies show that the cup point offers superior resistance to wear while maintaining a strong grip. Allen hex drive size 3 mm. 18-8 stainless steel provides strength and offers good corrosion resistance in many environments.
Metric M4 X 10mm Socket Head Cap Screw; Black; Pack of 10
- Din 912 black oxide or black burnished finish provides minor corrosion resistance recommended for indoor or weatherproof applications. Alloy steel socket head cap screw m4 (4mm diameter), 0. Note picture is for identification purposes only and should not be used for scaling of screw diameter, length, head dimensions, wrench size, or any other dimensions of screw. 9 (comparable to standard grade 8) suitable for all high strength screw applications. Refer to description above for all dimensions. 7mm (thread pitch) x 10mm (length) class 12.
M8-1.25 x 10 MM SOCKET HEAD CAP SCREWS 12.9 COARSE ALLOY ZINC-BAKE CR+6 | Full Thread |Size: M8-1.25|Length: 10mm|Head: Socket Cap|Drive: Internal Hex|Steel|Zinc|Thread: UNC (Metric) (Quantity: 100)
- Jet fitting & supply corporation has been providing fasteners since 1946 feel safe when buying from jet. Jet fitting & supply corporation has been providing fasteners since 1946 feel safe when buying from jet. Jet fitting & supply corporation has been providing fasteners since 1946 feel safe when buying from jet. Jet fitting & supply corporation has been providing fasteners since 1946 feel safe when buying from jet. Jet fitting & supply corporation has been providing fasteners since 1946 feel safe when buying from jet.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
