PRECISION TWIST Cobalt Screw Machine Length Twist Drills – Drill Point Angle: 135° Tool Material: COBALT Drill Type: Screw Machine Length Overall Length : 4-5/8″ Point Sharpening Type: Split Point Size : 11/16″
- Short lengths offer increased rigidity for machine drilling a variety of materials & alloys. . Suited for drilling steel, cast steel, cast iron, other alloyed or non-alloyed ferrous materials, and a variety of non-ferrous & non-metallic materials.
TTC PRODUCTION 60 Piece Screw Machine Stub Length Twist Drill Sets – Drill Point Angle: 135° Split Point Tool Material: H.S.S
- . For optimal performance and the best tool life, suitable lubricating/cutting oils or the appropriate coolant fluids are recommended. Best suited for drilling steel, cast steel, cast iron, or other alloyed or non-alloyed ferrous materials, they also work well for a variety of non-ferrous and non-metallic materials.
PRECISION TWIST Extra Long High Speed Steel Drills – Size : 1/4″ Flute Length : 9″ Drill Point Angle: 118° Flute Shape: Normal spiral – helical flutes Overall Length : 12″
- Extra-length drill bits, for providing a long reach. High-speed steel (hss), for use on a wide variety of materials. 135-degree split-point angles is self-centering, to reduce walking, to use with hard materials, and to reduce pressure on cutting edges. Nas 907 type b standards, for use in the aerospace industry. Steam tempering (also called black oxide), to retain cutting fluids and to prevent chip-to-tool welding.
Dormer A11017/64 Long Series Drill, Steam Oxide Coating, 118 Degree Drill Point Angle, High Speed Steel, 6.75 mm Head Diameter, 102 mm Flute Length (Pack of 10)
- Low thrust design self centering split point for easier penetration. It is 118° drill point angle with din 340 drill standard. Steam oxide surface treatment for increased wear resistance & lubricity.
TTC Taper Shank High Speed Steel Twist Drills-Tool Material: High Speed Steel Shank Style: Taper Shank Flute Shape: Normal spiral – helical flutes Drill Point Angle: 118 Degrees Overall Length: 29″ Size: 3-3/4″
- Ttc taper shank high speed steel twist drills-tool material high speed steel shank style taper shank flute shape normal spiral, helical flutes drill point angle 118 degrees overall length 29″ size 3-3/4″.
TTC PRODUCTION Extra Long High Speed Steel Drills – Size : 5/8″ Flute Length : 9″ Drill Point Angle: 118° Flute Shape: Normal spiral – helical flutes Overall Length : 12″
- For drilling steel, cast iron, and variety of other ferrous, non-ferrous metals and alloys. Designed for drilling holes in hard to reach locations or inaccessible areas. Designed for general-purpose deep drilling operations for normal materials. Used with hand held manual drills and either portable or stationary machines.
PRECISION TWIST Cobalt Taper Shank Twist Drills-Tool Material: Cobalt Shank Style: Taper Shank Flute Shape: Helical Flutes Drill Point Angle: 135° Overall Length : 10″ Size : 11/16″
- Flute length 5-3/8″. Bronze oxide finish. Morse taper 3.
Precision Twist 500 12 High Speed Steel Extra-Long Drill Bit, Black Oxide Finish, Round Shank, Spiral Flute, 135 Degree Point Angle, 19/64″ (Pack of 1)
- Steam tempering (also called black oxide), to retain cutting fluids and to prevent chip-to-tool welding. High-speed steel (hss), for use on a wide variety of materials. 135-degree split-point angles is self-centering, to reduce walking, to use with hard materials, and to reduce pressure on cutting edges. Nas 907 type b standards, for use in the aerospace industry. Extra-length drill bits, for providing a long reach.
SPHINX Spirec Cobalt Micro Twist Drills-Size: 0.0236″ Tool Material: HSS Cobalt Drill Point Angle: 118 Degrees Drill Type: Spirec Micro Twist Helix Angle & Style: 20 Degrees Point Sharpening Type: Normal Point [pack of 10]
- Sphinx spirec cobalt micro twist drills-size 0. 0236″ tool material hss cobalt drill point angle 118 degrees drill type spirec micro twist helix angle & style 20 degrees point sharpening type normal point [pack of 10].
KYOCERA Carbide Micro Drills – Tool Material: Carbide Drill Point Angle: 130 Degrees Flute Shape: Helical Flutes Overall Length: 1-1/2″ Point Sharpening Type: Split Point Size #74 [pack of 10]
- Kyocera carbide micro drills, tool material carbide drill point angle 130 degrees flute shape helical flutes overall length 1-1/2″ point sharpening type split point size #74 [pack of 10].
Dormer A13012.7 Taper Shank Drill Jobber, Steam Oxide Coating, 118 Degree Drill Point Angle, High Speed Steel, Head Diameter 12.7 mm, Flute Length 101 mm
- Low thrust design self centering split point for easier penetration. Steam oxide reduces wear and chip. Steam oxide coating surface treatment for increased wear resistance & lubricity. It is 118° drill point angle with din 345 drill standard.
Dormer A1226.0X90 Short Spotting Drill, Bright Coating, 90 Degree – 120 Degree Drill Point Angle, High Speed Steel, 6 mm Head Diameter, 30 mm Flute Length (Pack of 10)
- Provides spot location or chamfer for follow-up drilling operations. It is bright coating, high speed steel material with din 1897 drill standard. .
TTC PRODUCTION Cobalt Taper Shank Twist Drills-Tool Material: Cobalt Steel Shank Style: Taper Shank Flute Shape: Normal spiral – helical flutes Drill Point Angle: 118° Overall Length : 10″ Size : 11/16″
- Used with either portable or stationary machines having a taper socket spindle. Made from cobalt steel and resist the heat build up caused by the drilling operations very well. The taper shank is to be used in a taper socket. General purpose, heavy duty drills designed for drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
Solid Carbide Spade Drills-Tool Material: Solid Carbide Drill Point Angle: 118 Degress Point Sharpening Type: Normal Poi
- R10gt is a heavy duty drill with a 118° split point and tin tip. Provides the productivity of a fully tin coated drill at a fraction of the cost.
Extra Long “Long Boy” Twist Drill Sets – Drill Point Angle: 118 Degress Flute Shape: Helicoid Overall Length : 12″
- For drilling normal steels, cast iron, and variety of other ferrous, non-ferrous metals and alloys. Used with hand held manual drills and either portable or stationary machines. Designed for general-purpose deep drilling operations for normal materials. Designed for drilling holes in hard to reach locations or inaccessible areas.
PRECISION TWIST Cobalt Screw Machine Length Twist Drills – Drill Point Angle: 135° Tool Material: COBALT Drill Type: Screw Machine Length Overall Length : 4-1/4″ Point Sharpening Type: Split Point Size : 5/8″
- Suited for drilling steel, cast steel, cast iron, other alloyed or non-alloyed ferrous materials, and a variety of non-ferrous & non-metallic materials. Short lengths offer increased rigidity for machine drilling a variety of materials & alloys. .
PRECISION TWIST Cobalt Screw Machine Length Twist Drills – Drill Point Angle: 135° Tool Material: COBALT Drill Type: Screw Machine Length Overall Length : 4-1/4″ Point Sharpening Type: Split Point Size : 39/64″
- Short lengths offer increased rigidity for machine drilling a variety of materials & alloys. . Suited for drilling steel, cast steel, cast iron, other alloyed or non-alloyed ferrous materials, and a variety of non-ferrous & non-metallic materials.
Dormer A12210.0X90 Short Spotting Drill, Bright Coating, 90 Degree – 120 Degree Drill Point Angle, High Speed Steel, 10 mm Head Diameter, 35 mm Flute Length (Pack of 10)
- Provides spot location or chamfer for follow-up drilling operations. It is bright coating, high speed steel material with din 1897 drill standard.
TTC PRODUCTION Cobalt Silver & Deming Drills 8 Piece Sets – Drill Point Angle: 118° Tool Material: Cobalt Steel Flute Shape: Helical flute Series: Shank Size : Size : 9/16″, 5/8″, 11/16″, 3/4″,13/16″, 7/8″, 15/16″, 1″
- Intended for those applications where only a 1/2″ chuck is available to drive the drills. May be used with a wide range of portable or stationary machine tools and with hand held manual drills. Primarily designed as tools for heavy duty drilling of larger holes requiring reduced diameter straight shank drills. For optimal performance and the best tool life suitable lubricating/cutting oils or the appropriate coolant fluids are recommended. Suitable for most drilling operations in a wide array of materials having low and medium tensile strength ratings. Can be used in electric drills and drill presses with 1/2″ capacity drill chuck.
TTC PRODUCTION Solid Carbide Screw Machine Length Twist Drills – Drill Point Angle: 135 Degrees Tool Material: Solid Carbide Drill Type: Screw Machine Length Overall Length : 2-1/2″ Point Sharpening Type: Split Point Size 1/4″ [pack of 1]
- Ttc production solid carbide screw machine length twist drills, drill point angle 135 degrees tool material solid carbide drill type screw machine length overall length 2-1/2″ point sharpening type split point size 1/4″ [pack of 1].
TTC PRODUCTION Cobalt Taper Shank Twist Drills-Tool Material: Cobalt Steel Shank Style: Taper Shank Flute Shape: Normal spiral – helical flutes Drill Point Angle: 118° Overall Length : 10-3/4″ Size : 15/16″
- Made from cobalt steel and resist the heat build up caused by the drilling operations very well. The taper shank is to be used in a taper socket. General purpose, heavy duty drills designed for drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys. Used with either portable or stationary machines having a taper socket spindle.
SPHINX Spirec Cobalt Micro Twist Drills-Size: #75 Tool Material: HSS Cobalt Drill Point Angle: 118 Degrees Drill Type: Spirec Micro Twist Helix Angle & Style: 20 Degrees Point Sharpening Type: Normal Point [pack of 10]
- Sphinx spirec cobalt micro twist drills-size #75 tool material hss cobalt drill point angle 118 degrees drill type spirec micro twist helix angle & style 20 degrees point sharpening type normal point [pack of 10].
TTC PRODUCTION High Speed Steel 1/2″ Shank 12″ Extra Long Drills – Drill Point Angle: 118° Tool Material: High Speed Steel Flute Shape: Spiral flute Shank Size : 1/2″ Size : 1″ Point Sharpening Type: Standard
- . Good wear resistance in mild steels, soft metals (aluminum, copper, brass & bronze) & non-ferrous materials.
Dormer A13017/64 Taper Shank Drill Jobber, Steam Oxide Coating, 118 Degree Drill Point Angle, High Speed Steel, Head Diameter 6.75 mm, Flute Length 69 mm
- Low thrust design self centering split point for easier penetration. It is 118° drill point angle with din 345 drill standard. Steam oxide reduces wear and chip. Steam oxide coating surface treatment for increased wear resistance & lubricity.
M.A.FORD Solid Carbide Straight Flute Drills-Tool Material: carbide with 10% cobalt Drill Point Angle: 135 Degrees Point Sharpening Type: Split Point Flute Length: 5/8″ Overall Length: 2″ Size: 9/64″ [pack of 2]
- For drilling in hard and high-strength materials where hole is greater than two diameters deep. For heat-treated steel alloys harder than rc 50, nickel-chrome and stainless, bearing steels and high temperature alloys. Precision ground.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
