25 Best Corner Clamps

 

Shopline Right Angle Corner Clamp Handy Wood Miter Picture Frame Clamp for Woodworking Kit Guing Vise Framing Tool Jig

Shopline Right Angle Corner Clamp, Handy Wood Miter Picture Frame Clamp for Woodworking Kit, Guing Vise Framing Tool Jig

Shopline Right Angle Corner Clamp, Handy Wood Miter Picture Frame Clamp for Woodworking Kit, Guing Vise Framing Tool Jig - Size 15 x 9 x 25cm /59 x 35 x 098 inch a very handy corner clamp for picture framing and wood working. This corner clamp is perfect to hold joint at a 90° angle, also can be used for 45° sawing. High hardness make it will not rust, suitable for the production of reinforced frame, tank production and so on. Diagonal connection and reinforcement reinforcement, connecting more weight, withstand greater gravity. Fine thread thicker material and alloy thick thread, it will withstand higher intensity force.

 

9166 CORNER CLAMP

9166 CORNER CLAMP

9166 CORNER CLAMP - Plated, cold-drawn steel screws feature smoothly rolled uss threads. Fixed at 90-degrees to clamp miter or butt joints. Has steel sliding-pin handles. Clamp has a die cast aluminum frame and sliding jaws. Allows for miter correction, doweling, gluing, or nailing by leaving joints exposed.

 

4 Pack Pony Tools 9166 90 Degree Pony Corner Clamp

4 Pack Pony Tools 9166 90 Degree Pony Corner Clamp

4 Pack Pony Tools 9166 90 Degree Pony Corner Clamp - Holds work up to 3″ wide and leaves joints fully exposed for miter correction, doweling, gluing or nailing. S. S. Jorgensen pony 9166 adjustable clamp co. Threads •steel sliding-pin handles •two counter-sunk holes permit the clamp to be bench-top mounted fixed at 90º, clamps miter or butt joints. Two countersunk holes permit the clamp to be benchtop mounted (four clamps mounted as such provide a rectangular clamping fixture of unlimited size), die cast aluminum frame and sliding jaws, plated cold drawn steel screws with uss threads and steel sliding-pin handles. 90 degrees corner clamp opening 3″ 4pcs •die cast aluminum frames and sliding jaws •plated, cold-drawn steel screws with smoothly rolled u.

 

New 90°Degree Right Angle Picture Frame Corner Clamp Holder Woodworking Hand Kit

New 90°Degree Right Angle Picture Frame Corner Clamp Holder Woodworking Hand Kit

New 90°Degree Right Angle Picture Frame Corner Clamp Holder Woodworking Hand Kit - Quick load v-nail holding system and is easy to use for framing and joining. Quick adjust corner clamp to speed up production and joining capability. Faster than the logan graphics studio joiner model with 400 v-nails included. Note due to the difference between different monitors, the picture may not reflect the actual color of the item thank you. Adjustable nail spacing guide & settings and drives either 1 or 2 v-nails at a time.

 

Roto - 4 pcs of 90 Degrees Angle Clip Right Angle Folder Woodworking Clipframe Folderangle Clampcorner Clamp for Aquarium

Roto – 4 pcs of 90 Degrees Angle Clip, Right Angle Folder, Woodworking Clip,frame Folder,angle Clamp,corner Clamp for Aquarium

Roto – 4 pcs of 90 Degrees Angle Clip, Right Angle Folder, Woodworking Clip,frame Folder,angle Clamp,corner Clamp for Aquarium - Material aluminum alloy. Type tool parts. Colour random. Maximum clamping thickness 75 mm. Quantity 4 pcs.

 

Wolfcraft 3051000 Corner Clamps ES 22 2 Pieces

Wolfcraft 3051000 Corner Clamps ES 22 (2 Pieces)

Wolfcraft 3051000 Corner Clamps ES 22 (2 Pieces) - For boards with a thickness of 10, 22 mmfast and simple fixing of boards and frames at an angle of 90, like assembling shelves, small cupboardsor framesmounting aid for screwing or gluing boards togetherfor corner and t-joints, even with different board thicknessessingle-hand operation, the second hand is kept free for the workpiece.

 

Corner Clamp with Quick Release Cast Aluminum

Corner Clamp with Quick Release Cast Aluminum

Corner Clamp with Quick Release Cast Aluminum - Use this corner clamp for fast and precise 90 degree corner clamping. Constructed of cast aluminum, this corner clamp features a heavy duty handle and jaw protector caps to prevent work piece marring. The quick-release jaws allow fast setup and better project efficiency making this an easy-to-use clamp for the novice or professional.

 

Preamer 4 x 3 90 Degree Corner Right Angle Clamp Woodworking Frame Clamp Picture Holder

Preamer 4 x 3″ 90 Degree Corner Right Angle Clamp Woodworking Frame Clamp Picture Holder

Preamer 4 x 3″ 90 Degree Corner Right Angle Clamp Woodworking Frame Clamp Picture Holder - Maximum opening of 3″ inches or 75mm. Pre drilling mounting holes to allow fixing to work surfaces. Great for picture framing and wood working. Can also be used for 45 degree sawing. Aluminium alloy construction with steel screws.

 

Farmunion 4pcs 90 Degree Right Angle Miter Corner Clamp 3 Capacity Corner Tool Jig Red

Farmunion 4pcs 90 Degree Right Angle Miter Corner Clamp 3″ Capacity Corner Tool Jig Red

Farmunion 4pcs 90 Degree Right Angle Miter Corner Clamp 3″ Capacity Corner Tool Jig Red - 90° right angle clamp, holds joints at a 90 degree angle, whether you’re simply gluing or using fasteners, this miter style clamp will hold stock firm and square at an exact 90 degrees. Holds joints at a 90, degree angle for precise secure assembly. High hardness, will not rust, suitable for the production of reinforced frame, tank production, etc. Compatible fit for woodworking, fish tank fixing, picture frame reinforcement, etc, while generally used for a group of four. Material aluminum alloy with steel screwclamping range 3 inch.

 

Stanley - Corner Clamp Light-Duty

Stanley – Corner Clamp Light-Duty

Stanley – Corner Clamp Light-Duty - Stanley corner clamp light-duty sta083121 the bailey light-duty corner clamp has independently adjustable jaws which can hold material of equal or varying thickness at right angles. Cast aluminium construction for long lasting durability sta083121. Mounting holes allow the clamp to be securely attached to the work surfaces. 75mm clamping capacity.

 

2-12 JAW WELDER WELDING MOLDING ANGLE CORNER CLAMP BENCH VISE

2-1/2″ JAW WELDER WELDING MOLDING ANGLE CORNER CLAMP BENCH VISE

2-1/2″ JAW WELDER WELDING MOLDING ANGLE CORNER CLAMP BENCH VISE - 2-1/2″ jaw welder welding molding angle corner clamp bench vise this item features -this kind of machine can be broadly used on many kinds of metal working such as welding, riveting ,molding, etc. -Jaw height 1-1/2″ (60mm) -jaw length 4-1/4″ (90mm) -maximum opening 2-1/4″ -packing dimension 7″ x 7″ x2-1/4″. It can be used on clamping of work pieces, functioning also as a vice.

 

9166 CORNER CLAMP

9166 CORNER CLAMP

9166 CORNER CLAMP - Used for handtools & tool organizers, clamps. The product is manufactured in united states. This item is 9166 corner clamp.

 

IRWIN Tools QUICK-GRIP Light Duty Corner Clamp 3-Inch 226200

IRWIN Tools QUICK-GRIP Light Duty Corner Clamp, 3-Inch (226200)

IRWIN Tools QUICK-GRIP Light Duty Corner Clamp, 3-Inch (226200) - Perfect for picture frames, and smaller projects. Composite metal body and steel screws nylon rounds prevent damage to work pieces. Holds up to 200 pounds of pressure.

 

90 Degree Right Angle Clip Picture Frame Corner Clamp Woodworking Hand Tool Kit

90 Degree Right Angle Clip Picture Frame Corner Clamp Woodworking Hand Tool Kit

90 Degree Right Angle Clip Picture Frame Corner Clamp Woodworking Hand Tool Kit - Great for picture framing and wood working. Maximum clamping range 7. Description 90 °right angle clamp. Holds joints at a 90 degree angle. Can also be used for 45 degree sawing. Aluminium alloy construction with steel screws. Pre drilling mounting holes to allow fixing to work surfaces. Independently adjustable jaws. 5cm, generally 4 right-angle clamp all together to use.

 

WOOD DOUBLE MITRE PICTURE CORNER MITER FRAME CLAMP WOODWORKING GLUING VISE TOOL

WOOD DOUBLE MITRE PICTURE CORNER MITER FRAME CLAMP WOODWORKING GLUING VISE TOOL

WOOD DOUBLE MITRE PICTURE CORNER MITER FRAME CLAMP WOODWORKING GLUING VISE TOOL - Large 2-3/8″ jaw capacity. To make clamping even easier, this unique clamp also features a clever push-button system that allows you to adjust the clamp heads without time-consuming screwing or unscrewing. Description secure 90 degree tee and corner joints quickly and securely with this precision-cast, twin-screw miter clamp.

 

FIT TOOLS 90 Degree Corner Clamp for Wood working or Metal Right Angle Frame Vice

FIT TOOLS 90 Degree Corner Clamp for Wood working or Metal Right Angle Frame Vice

FIT TOOLS 90 Degree Corner Clamp for Wood working or Metal Right Angle Frame Vice - Ideal for wood working right angle 90 degree. Clamp width 7cm. Made in taiwan with high quality. Corner clamp tool. Dimension (lwh):157 157 52 cm.

 

Whitelotous 90 Degree Right Angle Clamp 100mm Mitre Clamps Corner Clamp Picture Holder

Whitelotous 90 Degree Right Angle Clamp 100mm Mitre Clamps Corner Clamp Picture Holder

Whitelotous 90 Degree Right Angle Clamp 100mm Mitre Clamps Corner Clamp Picture Holder - Aluminum alloy construction with steel screws. Holds joints at a 90 degree angle. Maximum clamping range 75cm, generally 4 right-angle clamp all together to use. Can also be used for 45 degree sawing. Pre drilling mounting holes to allow fixing to work surfaces.

 

WEICHUAN Corner Clamp - Corner Right Angle Vise Welding Woodworking Clamps at Right Angle 68mm Opening

WEICHUAN Corner Clamp – Corner Right Angle Vise Welding Woodworking, Clamps at Right Angle, 68mm Opening

WEICHUAN Corner Clamp – Corner Right Angle Vise Welding Woodworking, Clamps at Right Angle, 68mm Opening - Stylecorner right vise material aluminum alloy die-casting plierssurface coating single handle handle jaw rotation can be adjustable specifications maximum opening of about 68 mm jaw width of about 900 mm jaw depth of about 35 mm oad jaw closed 210 x257x50 (including the handle) oad jaw opened 210 x360x50 (including the handle) net weight 815grams purpose woodworking.

 

4 pcs 90 Degree Right Angle Miter Corner Clamp 3 capacity Picture Frame Holder Woodwork

4 pcs 90 Degree Right Angle Miter Corner Clamp 3″ capacity Picture Frame Holder Woodwork

4 pcs 90 Degree Right Angle Miter Corner Clamp 3″ capacity Picture Frame Holder Woodwork - This is a rugged, precise clamp with a saw slot to allow you to make your final miter trim while firmly holding the stock in position. . Features aluminum alloy construction w/steel screws precision, machined screw assembly dipped t, bar handles clamps miter or butt joints holds joints at a 90, degree angle for precise secure assembly holds work of different widths at one time (up to 3 inches) two counter sunk holes allow fastening to work surfaces a great tool for picture framing, this corner clamp has a 3″ capacity with a 3/8″ high hard plastic clamping surface. Note when gluing two boards do not over tighten forcing the glue out of the joint, this will cause a weak joint and you could break or pull the washer out of the clamp. Clamp is constructed of durable aluminum ally with steel threaded vise screws and two countersunk mounting holes for permanent installation on the bench. Whether you’re simply gluing or using fasteners, this miter style clamp will hold stock firm and square at an exact 90 degrees.

 

Wood Mitre Picture Corner Miter Gluing Clamp Woodworking Framing Tool

Wood Mitre Picture Corner Miter Gluing Clamp Woodworking Framing Tool

Wood Mitre Picture Corner Miter Gluing Clamp Woodworking Framing Tool - The corner clamp adjusts to multiple positions and the handle folds for increased leverage. Wood mitre picture corner miter gluing clamp woodworking framing tool use this versatile. Corner clamp for cabinet and furniture assembly applications like corner and butt joining. Features include a v-groove for round stock and an oil-resistant cushion grip the jaws. Accept pieces up to 33 join pieces with widely different widths multiple positions for”.

 

Hawk TZ7100-1 - 90-Degree Angle Miter Corner Clamp

Hawk TZ7100-1 – 90-Degree Angle Miter Corner Clamp

Hawk TZ7100-1 – 90-Degree Angle Miter Corner Clamp - When gluing two boards do not over tighten the joint forcing the glue out of the joint, this will cause a weak joint and you could break or pull the washer out of the clamp. Aluminum alloy construction w/steel screws precision, machined screw assembly dipped t, bar handles clamps miter or butt joints holds joints at a 90, degree angle for precise secure assembly holds work of different widths at one time (up to 3 inches). This is a rugged, precise clamp with a saw slot to allow you to make your final miter trim while firmly holding the stock in position. A great tool for picture framing, this corner clamp has a 3″ capacity with a 3/8″ high clamping surface. Clamp is constructed of durable aluminum ally with steel threaded vise screws and two countersunk mounting holes for permanent installation on the bench. Tow counter sunk holes allow fastening to work surfaces. Whether youre simply gluing or using fasteners, this miter style clamp will hold stock firm and square at an exact 90 degrees. .

 

right angle clamp - TOOGOOR 4pcs 75mm Mitre Corner Clamps Picture Frame Holder Woodwork Right Angle Red

right angle clamp – TOOGOO(R) 4pcs 75mm Mitre Corner Clamps Picture Frame Holder Woodwork Right Angle Red

right angle clamp – TOOGOO(R) 4pcs 75mm Mitre Corner Clamps Picture Frame Holder Woodwork Right Angle Red - Toogoo is a registered trademark. Our products will enhance your experience to unparalleled inspiration. Material aluminumtype 4 -inchcolor redpackage included4x 90¡ãright angle clampnotelight shooting and different displays may cause the color of the item in the picture a little different from the real thing. Only authorized seller of toogoo can sell under toogoo listings. 5cm, generally 4 right-angle clamp all together to use. The measurement allowed error is +/-1-3 cm. Pre drilling mounting holes to allow fixing to work surfaces. Maximum clamping range 7. Toogoo(r) 4pcs 75mm mitre corner clamps picture frame holder woodwork right angle redindependently adjustable jaws.

 

chengsale 4Pcs 90 Degrees Right Angle Clamp 100mm Corner Clamp Picture Holder Woodworking Holder

chengsale 4Pcs 90 Degrees Right Angle Clamp 100mm Corner Clamp Picture Holder Woodworking Holder

chengsale 4Pcs 90 Degrees Right Angle Clamp 100mm Corner Clamp Picture Holder Woodworking Holder - Holds joints at a 90 degree angle, can also be used for 45 degree sawing. Aluminum alloy construction with steel screws independently adjustable jaws. High hardness, will not rust, suitable for the production of reinforced frame, tank production, etc. Maximum clamping range 75mm/3in, generally 4 right-angle clamp all together to use. Great for picture framing and wood working.

 

MLCS 9012 Woodworking Exclusive Merle Multi-Corner Clamp

MLCS 9012 Woodworking Exclusive Merle Multi-Corner Clamp

MLCS 9012 Woodworking Exclusive Merle Multi-Corner Clamp - They’re made of high impact abs plastic for long life and heavy use. The merle clamp will hold any type of frame for easy gluing, nailing or screwing. Flexible jaw inserts are non-marring and are easily removed. Just clip on more corners and get to work. Even jointing force at all corners. The dual pivot feature allows the merle to clamp virtually any size or shape securely perfect for circles and ovals, plus triangles, hexagons, octagons, and more. The merle clamp has almost no capacity limitation clamps as small as 2-5/8″ x 2-5/8″ to 69″ x 69″, or 23′ around, but can be extended to any length by using standard 3/8″ steel banding or strapping. Quick release corner clips pull off with finger pressure. The adjustable merle clamp allows you to use as much or as little clamping pressure as needed. Cast aluminum and steel construction makes the merle clamp a tough tool that will work hard and long for you. 23′ steel banding included. It’s excellent for wide cabinet type frames (use in the center or edges), and also for narrow picture frames.

 

Miter Clip 003027 Corner Clamp for Tight Glue Joints Yellow

Miter Clip 003027 Corner Clamp for Tight Glue Joints, Yellow

Miter Clip 003027 Corner Clamp for Tight Glue Joints, Yellow - Clamping miters couldn’t get much easier than with the miter clip. The metal spurs hold the wood firmly and allow the clamp to be rotated, while leaving minimal marks. Just position the miter clip and squeeze-the reverse cam mechanism applies pressure and holds the miter clamp firmly shut, while the notch keeps the tips of the miters neatly aligned. Once clamped, you can also rotate the clamp handle up and out of the way, providing access so you can nail the miter and move on to the next corner. Made in the usa.