Freud 99-760 New Premier Adjustable Rail & Stile Router Bit System Set 1/2″ Sale
- Use on table mounted portable routers. Router bit set freud model 99-760 factory sealed new great sale price adjustable produces perfect fitting rail and stile doors from 5/8′ to 1-1/4′ stock. Premier adjustable rail and stile router bit system carbide tipped anti-kickback router bits that are computer balanced cuts all composition materials plywood hardwood and softwoods. Roundover profile 2 pieces 1/4′ shank-carded oa lgth in=3-3/4 oa dia x carb ht in=1-11/16×1-1/4.
Freud 99-760 New Premier Adjustable Rail & Stile Router Bit System, 1/2-Inch Shank
- Two router bits that create any door in 5/8-inch to 1-1/4-inch door thickness range. Bits feature freud’s perma-shield coating that reduces heat and pitch build up along with rust, and freud’s tico hi-density carbide to maximize bit life and material finish. Top portion of cutter, including bearing and spindle, is removed to produce the front of the long tenon profile for blind tenons, through tenons, or bridle joints. Adjustable shims enable both a tight fit when using plywood panels and the ability to use thick panels ( from 55mm to 635mm ) the unique cutter geometry virtually elimantes tearout. Optional cutters are available for double profile doors (99-860) and glass panel doors (54-760) with variable thicknesses and long tenons for perfecting matching profiles on all doors because it’s the same set of router bits.
MLCS Stacked Rail and Stile Router Bit – Traditional Profile
- 1/2″ shank. For best results use only with your router mounted in a table. All that is required is to simply lower or raise the bit. The easy way to make perfect rails and stiles with only one bit. 2 flute, carbide-tipped with totally enclosed ball bearing guide. Cut rails and stiles without having to reverse, switch or reassemble cutters, or without having to remove the bit from your router.
Yonico 12243 Rail and Stile Router Bits with Matched 2 Bit Standard Ogee 1/2-Inch Shank
- Two flute carbide cutters & 1/2″ shanks. Yonico router bits are manufactured with c3 micrograin carbide, producing precision work and a smooth, detailed finish. Use the ogee rail and stile bits with up to 1″ stock. Complete your doors from our selection of yonico panel raisers giving it an enhanced finish. Yonico rail and stile router bit set (12243) will cut both stile and rail for cabinet doors in the classic ogee design. Fully enclosed ball bearing guides allow for precise routing without the use of a fence. Rail and stile set comes in a solid wood storage case.
EnPointâ„¢ 15/64″ 6mm Medium Carbon Steel Shank Stile and Rail Router Cutter 22mm Dia Carbide-Tipped Wainscot Paneling Router Bit Woodworking Table Edge Stepping Router Bit for PVC MDF Carbon Fiber Wood Composites Plastics
- With use of high-frequency welding comes outstanding longevity, little chance of breaking high-speed steel body for high hardness, wear-resisting and heat-resisting. Medium carbon steel for shank and super fine mirror-like finish, excellent carbide brazing premium spray-painting makes more smoother and easier chip clearance. It is usually used for architectural and furniture molding and also be used in handled, table-mounted and cnc router. Carbide-tipped cutting edge brings sharper cutting experience and high work efficiency. Mainly used for hardwood, redwood, acrylic, medium density fiber, pvc etc, using plunge form bits for routing decorative details on the face side of raised pannels or solid wood paneling, or on the edge using a fence.
Yonico 12338 Rail and Stile With Panel Bit Router Bit Set with Ogee 1/2-Inch Shank
- Ball bearing guides allow you to make precise cuts without the use of a fence. Use with up to 1″ stock. The panel raiser puts a classic edge on the central panel of your door. . Rail and stile bits create a perfectly matched rail and stile door frame. Comes in a solid wood storage case. This 3 bit door making router bit set includes ogee rail and stile bits and a 2-1/2″ ogee panel raiser. Features • industrial quality • c3 tungsten carbide cutters • solid hardened steel body • anti-kickback design • build-up resistant coating • satisfaction guaranteed. Bit shanks are 1/2″.
Traditional Stile and Rail Router Bit Set
- Final sharpening with 600, 800 grit diamond wheels. K10 and k20 grade carbide for clean cutting action. 1/4″ x 3/8″ groove. Rockler rail and stile bit sets are manufactured to exacting standards and create perfectly matched cope and stick joints. . Precision balanced for smooth operation. The one-piece cutting edge allows you to achieve a perfect fit without having to disassemble an arbor and install shims. If you are not 100% satisfied with these bits, send them back for a refund. 5/8″ bearing. Use this rail and stile router bit set to create beautiful door frames for glass panel, flat panel and raised panel doors. With ball bearing guide, you can even use a template to build doors with curving rails. Baked-on anti-stick coating to reduce pitch and resin buildup.
Yonico 12339q Rail and Stile with Panel Raiser Router Bit Set Cove 1/4-Inch Shank, 3-Piece
- The yonico 12339q router bit set comes in a solid wood storage case. The yonico 12339q door construction router bit set includes 1/4″ round over rail and stile bits and a 1/4″ cove panel raiser. Ball bearing guides allow you to make precise cuts without the use of a fence. For use with up to 1″ stock. Router bit measurements • rail & stile, 1-3/4″ diameter, 1″ cutter height, 2-7/8″ overall height, 3/8″ depth of cut, 7/8″ bearing diameter • panel raiser, 2-1/2″ diameter, 1/2″ cutter height, 2-7/16″ overall height, 1″ depth of cut, 1/2″ bearing diameter rail and stile bits create a perfectly matched rail and stile door frame. Bit shanks are 1/4″. The cove raised panel router bit cuts a stylish edge on the central panel of your door.
Freud 99-863 Optional Cutters Double Sided Doors for 99-763 New Premier Adjustable Rail & Stile Router Bit System by Freud
- Mainly used for hardwood, redwood, acrylic, medium density fiber, pvc etc, using plunge form bits for routing decorative details on the face side of raised pannels or solid wood paneling, or on the edge using a fence. Freud 99-863 optional cutters double sided doors for 99-763 new premier adjustable rail & stile router bit system. With use of high-frequency welding comes outstanding longevity, little chance of breaking high-speed steel body for high hardness, wear-resisting and heat-resisting. It is usually used for architectural and furniture molding and also be used in handled, table-mounted and cnc router. Medium carbon steel for shank and super fine mirror-like finish, excellent carbide brazing premium spray-painting makes more smoother and easier chip clearance.
Yonico 12119 Stacked Rail and Stile Router Bit with Cove 1/2-Inch Shank, 1-Piece
- Simply cut the stile and then lower the bit in your table to make the rail cuts. Two flute carbide cutters with ball bearing guide. No need to switch or reassemble cutters. Shank is 1/2″. The yonico stacked rail and stile router bit will cut both rail and stile in a cove design. .
Yonico 12343 Round Over Rail and Stile with Cove Panel Raiser 3 Bit Router Bit Set 1/2-Inch Shank
- C3 micro-grain tungsten carbide cutters. Build-up & heat resistant teflon coating. Build-up and heat resistant teflon coating. Satisfaction guaranteed and lifetime warranty. Solid hardened steel bodies with anti-kickback design. Satisfaction guaranteed & lifetime warranty. Industrial quality router bits.
Yonico 12432 Cabinet Door Router 4 Bit Set with Rail, Stile Panel Raiser and Glue Joint 1/2-Inch Shank
- Fully enclosed ball bearing guides allow for precise cuts without the use of a fence. Use the reversible glue joint bit for gluing up multiple boards to extend panel width. Then, run one cut face up and the adjoining cut face down creating a perfect joint. Two flute carbide cutters & 1/2″ shanks. Make professional raised panel cabinet doors with the yonico 12432, 4 bit router bit set. Set comes in a solid wood storage case. Simply set the center of the bit with the center of your stock. The panel raiser puts a classic ogee edge on the central panel of your door. For use with up to 1″ stock. The glue joint bit will rout both joining cuts. Rail and stile bits create a perfect round-over rail & stile door frame.
YaeTek Rail & Stile Router Bit Set – Shaker 2 Pc. 1/2″ Shank
- Our router bits are manufactured using solid hardened steel and c3 micro grain carbide. Precise, designer profiles create smooth and detailed cuts, perfect for projects of any level of complexity. Our bits are the preferred choice of professionals and hobbyists alike. (C3 grade carbide is the highest grade used in the router bit industry) the result is a highly durable bit that can be utilized for the most rigorous industrial applications. .
Classical Stile and Rail Router Bit Set
- With ball bearing guide, you can even use a template to build doors with curving rails. The one-piece cutting edge allows you to achieve a perfect fit without having to disassemble an arbor and install shims. Use this rail and stile router bit set to create beautiful door frames for glass panel, flat panel and raised panel doors. If you are not 100% satisfied with these bits, send them back for a refund. Final sharpening with 600, 800 grit diamond wheels. Baked-on anti-stick coating to reduce pitch and resin buildup. 1/4″ x 3/8″ groove. K10 and k20 grade carbide for clean cutting action. 5/8″ bearing. Precision balanced for smooth operation. Rockler rail and stile bit sets are manufactured to exacting standards and create perfectly matched cope and stick joints.
Freud 54-760 Cutter Glass Panel Door for 99-760, 99-761, 99-763, 99-764 New Premier Adjustable Rail & Stile Router Bit System
- Used with new premier rail & stile bits allows for glass panel doors with variable thicknesses and long tenons. Bit features freud’s perma-shield coating that reduces heat and pitch build up along with rust. For new premier adjustable rail & stile router bit system model numbers 99-760, 99-761, 99-763, and 99-764. Perfect matching profile on all doors because it’s the same set of router bits. Bit features freud’s tico hi-density carbide to maximize bit life and material finish.
Infinity Tools 91-502, 1/2″ Shank Matched Rail & Stile Router Bit Set, Standard Profile With FREE Set-up Block
- Precision machined from fatigue-proof steel for extra strength. 1-3/4″ cutter diameter with 7/16″ profile width. Silver ptfe coating reduces resin build-up for fast and easy cleaning. Standard profile with free 3/4″ setup block. Micro-grain carbide tips for a long life and repeated sharpening.
Infinity Tools 91-503, 1/2″ Shank Matched Rail & Stile Router Bit Set, Bevel & Radius Profile With FREE Set-up Block
- Micro-grain carbide tips for a long life and repeated sharpening. Precision machined from fatigue-proof steel for extra strength. Silver ptfe coating reduces resin build-up for fast and easy cleaning. 1-3/4″ cutter diameter with 7/16″ profile width. Bevel & radius profile with free 3/4″ setup block.
Infinity Tools 91-525, 1/2″ Shank Interior & Exterior Door Making Rail & Stile Router Bit Set, Shaker Profile
- Save $$ by making your own doors with this versatile system that comes with both 1/4″ and 1/2″ kerf slot cutters for making doors out of 1-3/8″ or 1-3/4″ stock. Building 1-3/8″ interior or 1-3/4″ exterior-facing doors has never been easier than with the help of this specially designed 2-piece door set. This heavy duty set produces a 7/16″ wide profile.
Yonico 12243q Rail and Stile Router Bits with 2 Bit Standard Ogee 1/4-Inch Shank
- Yonico rail and stile router bits produce impressive and perfect results with every cut yielding years of woodworking satisfaction. Fully enclosed ball bearing guides allow for precise rail and stile cuts without the use of a fence. Two flute carbide cutters & 1/4″ shanks. Yonico rail and stile router bit set (12243q) will cut rail & stile for cabinet doors in the classic ogee design.
Yonico 12238 Rail and Stile Router Bits with Matched 2 Bit Quarter-round 1/2-Inch Shank by Yonico
- Industrial quality router bitsc3 micro-grain tungsten carbide cutterssolid hardened steel bodies with anti-kickback designbuild-up & heat resistant teflon coatingsatisfaction guaranteed & lifetime warranty.
Yonico 12249 Rail and Stile Router Bit Set with 1/2-Inch Shank, 2-Piece
- Build-up and heat resistant teflon coating. Satisfaction guaranteed and lifetime warranty. Solid hardened steel bodies with anti-kickback design. Industrial quality router bits. Build-up & heat resistant teflon coating. Satisfaction guaranteed & lifetime warranty. C3 micro-grain tungsten carbide cutters.
Yonico 12236 Rail and stile Router Bit Set with Matched 2 Bit Large Ogee 1/2-Inch Shank
- Bits have two flute carbide cutters & 1/2″ shanks. Yonico router bits are made from c3 micrograin carbide providing excellent, detailed cuts. Set comes in a beautiful solid wood storage case. Fully enclosed ball bearing guides allow for precise rail and stile cuts without the use of a fence. Cut rails and stiles using up to 7/8″ stock. The yonico 12236 ogee rail and stile router bit set is no exception, yielding multiple hard core routing. Create impressive cabinet doors with the yonico large, ogee rail & stile router bit set.
MLCS Stacked Rail and Stile Router Bit – Beveled Profile
- 1/2″ shank. All that is required is to simply lower or raise the bit. Cut rails and stiles without having to reverse, switch or reassemble cutters, or without having to remove the bit from your router. 2 flute, carbide-tipped with totally enclosed ball bearing guide. For best results use only with your router mounted in a table. The easy way to make perfect rails and stiles with only one bit.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
