22 Top Tile Saws

 

Ryobi 4 in. Tile Saw - California residents see proposition 65 information •powerful 12-amp motor to help you cut through the toughest tiling materials •lock-on trigger for added control when making long cuts and continuous usage •gripzone overmold technology with micro texture for increased comfort during prolonged use •can cut material up to 1-5/32 in. When at 45 degrees •externally accessible brushes for fast/easy brush changes and less downtime •brass water regulator to control water flow during use •includes 12ft water supply with regulator and faucet adapter, gfci plug, arbor wrench and 4 in. Introducing the new ryobi 4 in. Diamond cutting wheel. Handheld wet tile saw. With upgraded speed and power, it is the perfect tool for any tile job. At 90 degrees and 3/4 in. It’s backed by ryobi’s 3-year limited warranty.

 

Carriage Tray for Husqvarna, Target, & Felker Tile Saws - Ideally used on thinner and softer masonry materials. Miter guide allows for easy miter cuts from 0 to 45 degrees. Xp2 and xp4 blades designed specifically for high power tile saws, allowing quick, free, low heat and straight cutting.

 

Dewalt D24000 Tile Saw Water Pan, 622978-00 - Very effective water containment system. The water pump is to be secured to a slotted “mini-table” on the saw-assembly when being transported. Pan material is abs plastic.

 

Dremel US540-01 Ultra-Saw 3.5-Inch Tile Diamond Blade - No water needed. Diamond grit for tile cutting applications. Cuts a variety of tile including wall tile, floor tile, porcelain, slate, stone, and cement backer board. May also be used to remove grout. Cuts most tiles and masonry materials with ease and precision and no water needed.

 

612780-00 Replacement Submersible Tile Saw Pump Pe-1 Series Little Giant Replacement Tile Saw Pump - Waterproof on/off switch. Fits the dewalt d24000 tile sawmeasures 3 5/8 inch x 3 1/2 inch x 2 3/4 inch1/4 inch mnpt dischargescreened inlet with 6 foot power cordalso fits most tile saws115volts100% submersibleuse also for dewatering, water features, water falls and statuary fountains. Makes bevel cuts from 0 to 45° left. Rip fence scale0 to 45°. Stand sold separately use with continuous rim blade, sold separately.

 

Ridgid R4030 Tile Saw (4 Pack) Replacement Brush Assembly # 291131002-4pk - Continuous rim design provides chip free cutting in all types of tile. Extended performance diamond matrix provides long life and enhanced material cutting. Xp2 and xp3 blades with laser cut expansion slots eliminate blade warping due to heat build-up. Premium xp2 and xp4 cutting matrix means xp2 gives 2 x’s the life of standard blades, xp4 gives 4x’s the life of standard blades. Xp2 and xp4 blades designed specifically for high power tile saws, allowing quick, free, low heat, and straight cutting.

 

Water Tube Assembly for Target/Felker Tile Saws - Water tube assembly for husqvarna tilematic ts 250x, tilematic ts 250xl, target tilematic g2. As well as felker tilemaster plus, & tilemaster xl plus tile saw. Includes 1/4″ id tubing with “y” fitting.

 

Adjustable Rip Guide for Target/Felker Tile Saws - 15 pounds 1-year warranty. Rip guide. Includes saw, 7-inch diamond blade, submersible water pump, adjustable rip guide. 7-inch bench wet tile saw. High-impact thermoplastic water reservoir will not rust or peel.

 

Barwalt 70852 Extra Large Tile Saw Shack - Measurements 47-inch x 60-inch x 62-inch. The heavy gauge plastic sheeting used on the pan is industrial tough. The velcro used at all attachment points is commercial grade. All bolts are made out of stainless steel, fitted with aircraft nuts that will not fall off. The aluminum framework is well designed and will last many years.

 

MK Motor for MK-270, MK-370, 470, 370EXP, 770, 770EXP Tile Saws, 120 V, 156428-R - Mk-safeswitchtm prevents saw from being operated when locking key is removed. Maintenance-free, self-lubricating pinion and gear-box assembly. Heavy duty on/off switch. Powerful high-torque motor, 1-1/4 hp, 74 amps, 6000 rpm. Blade capacity 7″ (178mm), arbor size 5/8″ (16mm).

 

DeWALT D24000 / D24000S Wet Tile Saw (4 Pack) Replacement Brush # 5140024-30-4pk - Genuine oem replacement part new, oem bulk packaged please refer to list below for compatibility compatible with the following models dewalt d24000 type 1 wet tile saw, d24000s type 1 wet tile saw, d24000 type 2 wet tile saw. Includes (4), brush # 5140024-30 works with dewalt wet tile saw.

 

7 inch Bridge Tile Saw 1.5 HP with Miter Gauge and Splash Guard; Cuts masonry up to 20 in. long, 14 in. diagonal - @ 45° length of cut (in. ) 1-18 in. Long. Product height 14-3/4 in. W accessories included miter gauge and splash guard. ) 1-1/8 in. Maximum cutting depth (in. When cutting at a 90 degree angle. Depth of cut (in. Cord length 8 ft. Amperage (amps) 10 cutting angles (deg) 0 to 45° horsepower (hp) 1. Product length 35 in. ) 20 in. Blade size 7 in. This versatile tile saw includes miter gauge and splash guard. Bridge tile saw is designed for cutting ceramic tile, quarry tile, marble, terra-cotta and slate up to a maximum thickness of 1-18 in. The design also accommodates cut lengths up to 20 in. The 1. Product width 18-1/4 in. @ 90°, 3/4 in. L x 15-3/4 in. 5 maximum speed (rpm) 5000 rpm quantity 1 arbor size 5/8 in. Table dimensions 19-1/2 in. 4 lbs. 5 hp 7 in. Product weight 38.

 

MK Diamond 153243-JCS MK-101 Pro24 Tile Saw with JCS Stand - The blade guard has been engineered to provide optimal water flow and is wide enough to accommodate a profile wheel. Voltage of 120 volts. Length of cut is 24 inches. Overall weight of 156 pounds. Blade has 3,450 revolutions per minute. Arbor size of 5/8 inch. Blade capacity of 10 inches. Dimensions of 48 by 24 by 29 inches. Horse power of 1-1/2 hp. The permanently lubricated blade shaft bearings provide years of maintenance-free operation. Diagonally cuts 18 inch tile. Mk diamond 153243-jcs mk-101 pro24 tile saw with jcs stand has all the features of the mk-101 but with an extended frame that allows the cutting of tiles up to 24 inches in length and an integrated stand that allows operator to set up or transport in a matter of seconds. In addition it is equipped with an aluminum table with nonslip molded neoprene surface. Depth of cut is 3 inches. Csa approved.

 

QEP 8 in. Diamond Blade for Wet Tile Saws - 7640 maximum rpm, arbor size of 0. The qep 6-8001q 8 in. 56 in. 875 to. The blade is specifically engineered for cutting ceramic tile. Continuous rim diamond blade provides accurate cutting with minimal chipping. Designed for wet cutting and long lasting performance.

 

QEP 22400Q 3/5 HP Torque Master Tile Saw, 4-Inch - 3/5 hp high-torque geared motor is dependable and provides maximum cutting performance. Tilting table with extension side table allows for easy miter cuts. Includes 4 in diamond blade, 2-side extension tables add 5 in to the width of the table to support larger tiles. Fully adjustable rip/angle.

 

Dewalt D24000 Tile Saw Back Tray Extension, 612783-00 - Does not include side tray extension or water pan. For d24000 tile saw. All water is caught and routed back into the tub.

 

Husqvarna Construction 542203252 Tilematic Folding Steel Tile Saw Stand – STAND ONLY - Stand easily folds for storage and transport. Set your saw up on a stand and make work easier. . This folding steel stand will support husqvarna tilematic ts 250x, target dilemmatic g2, and felker tilemaster plus tile saws.

 

Ryobi WS722SN 7-Inch Tile Saw with Stand - Continuous-rim diamond cutting wheel offers precision cutting and prevents chipping cutting table tilts for precise 22. This item is from a large “do it yourself” home improvement chain store. The pictures on this listing are of the item you will receive, there are no stock photo’s used. It looks very lightly used and works perfectly. We buy our stuff from this store in bulk usually ranging from overstock, packaging damage to customer returns. Tile and diagonally cut 13 in. 5 and 45 degree bevel cuts water reservoir system captures run-off and provides continuous water to the cutting wheel corrosion-resistant, stainless-steel table for increased durability 1-1/4 in. Please look at all the pictures to see what’s included and to see the cosmetic condition of this item. Tile saw features portability with its compact size that is designed for fast and secure setup. To ensure that this tile saw will be in the same advertised condition when you receive it, we have fully inspected it and tested it. 5 degree and 45 degree angles. If you have any questions or concerns please don’t hesitate to let me know. This ryobi 7″ wet tile saw appears to be in excellent used and working condition. . The saw features a rip guide that locks in place on the front and rear rails to ensure precision cuts that are straight every time. Tile. The tile saw cuts through ceramic, porcelain and stone tiles up to 1-1/4 in. Here are the specifications and information on this item product overview model # ws722 the ryobi 7 in. This saw also features best in class cutting capacity with the ability to rip 20 in. Miter guide allows for easy miter cuts from 0 to 45 degrees locking rip guide sets up along the front and rear scales for added precision powerful induction motor powers through ceramic, porcelain and stone tile 7 in. Cutting depth capacity for thic. This saw has a tilting stainless-steel table to allow bevel cuts at 22. Thick with ease and accuracy.

 

6″ Vacuum Brazed Diamond Profile Wheel for Tile Saw/ B 3/8″ Demi Bullnose - Diamond profile wheel b 3/8″ fits on most tile saws with 5/8″ arbor. They are designed for 3/8″ demi-bullnose edge profiling on tiles of marble, soft granite, porcelain, travertine and natural stones. Diamond profile wheels can be used wet or dry. Utilizing the latest “vacuum brazed technology,” our profile wheels are much longer lasting than the electroplated ones on the market. 25mm, make sure it fits inside your tile saw guard. We carry different sizes and shapes of profile wheels, such as 1/2″ demi-bullnose, you can find them on damo storefront. They are super aggressive as well as leave a smooth and chip free edge. . We damo diamond tools, llc holds exclusive distribution to damo trademark products as you can see clearly marked from the picture on the product listing. Arbor thickness is 8mm, outside profile wheel thickness is 15.

 

SKIL 3550-02 7-Inch Wet Tile Saw with HydroLock Water Containment System - Bevel cuts tile at 0, 225 and 45 degrees, giving flexibility for different cut types. Hydro lock water containment system keeps water contained near the blade and reduce clean-up time. Sliding side extension provides support for tiles up to 18 x 18-in. Adjustable rip fence with miter gauge for accurate straight and miter cuts. Aluminum table top is a durable, rust-resistant surface.

 

RIDGID 7″ Portable Job Site Wet Tile Saw 6.5 Amp Induction Motor Power - It also extends forward. Ridgid continues to provide best-in-class features on this table-top tile saw. The t-square design sets up securely for repeatable cuts and slides effortlessly when adjustments are needed. The fence is simply the best on the market.

 

Neiko 7in Diamond Blade Wet / Dry Turbo for Circular, or Wet Tile Saw Tools - 5/8 or 7/8 arbor. Long lasting qualty for less than half of the price of others. 8600 rpm. 7 ” diamond blade for dry or wet cutting, tile, concrete and more.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.