22 Most Wanted Straight Flute Taps for 2020

 

Morse Cutting Tools 33823 Straight Flute Hand Taps High-Speed Steel Bright Finish Bottom Type H3 Pitch Diameter 3 Flutes 6-32 Size

Morse Cutting Tools 33823 Straight Flute Hand Taps, High-Speed Steel, Bright Finish, Bottom Type, H3 Pitch Diameter, 3 Flutes, #6-32 Size

Morse Cutting Tools 33823 Straight Flute Hand Taps, High-Speed Steel, Bright Finish, Bottom Type, H3 Pitch Diameter, 3 Flutes, #6-32 Size - Straight flute hand taps are used for hand tapping and machine tapping in through holes or blind holes in a wide variety of materials. .

 

Morse Cutting Tools 38205 Metric Straight Flute Hand Tap Set High-Speed Steel Bright Finish D3 Pitch Diameter Limit 3 Flutes M25 x 045 Size

Morse Cutting Tools 38205 Metric Straight Flute Hand Tap Set, High-Speed Steel, Bright Finish, D3 Pitch Diameter Limit, 3 Flutes, M2.5 x 0.45 Size

Morse Cutting Tools 38205 Metric Straight Flute Hand Tap Set, High-Speed Steel, Bright Finish, D3 Pitch Diameter Limit, 3 Flutes, M2.5 x 0.45 Size - . Straight flute hand taps are used for hand tapping and machine tapping in through holes or blind holes in a wide variety of materials.

 

Morse Cutting Tools 33455 Straight Flute Left Hand Taps High-Speed Steel Bright Finish Plug Type H3 Pitch Diameter 4 Flutes 34 16 Size

Morse Cutting Tools 33455 Straight Flute Left Hand Taps, High-Speed Steel, Bright Finish, Plug Type, H3 Pitch Diameter, 4 Flutes, 3/4″, 16 Size

Morse Cutting Tools 33455 Straight Flute Left Hand Taps, High-Speed Steel, Bright Finish, Plug Type, H3 Pitch Diameter, 4 Flutes, 3/4″, 16 Size - . Left hand straight flute hand taps are used for hand tapping and machine tapping in through holes or blind holes in a wide variety of materials.

 

Cle-Force 1699M C69520 M4X07 Taper Plug and Bottoming Carbon Steel 3 Piece Hand Tap Set  Straight Flute Straight with Square Shank Bright Uncoated Finish Pack qty 1

Cle-Force 1699M C69520 M4X0.7 Taper, Plug, and Bottoming Carbon Steel 3 Piece Hand Tap Set , Straight Flute, Straight with Square Shank, Bright (Uncoated) Finish (Pack qty. 1)

Cle-Force 1699M C69520 M4X0.7 Taper, Plug, and Bottoming Carbon Steel 3 Piece Hand Tap Set , Straight Flute, Straight with Square Shank, Bright (Uncoated) Finish (Pack qty. 1) - Cle-force 1699m m4x0. Bottoming hand taps are used for threading close to the bottom of blind holes. Taper hand taps are commonly used in through holes. Plug hand taps are the most common chamfer for use by hand or machine in through or blind holes. 7 taper, plug, and bottoming carbon steel hand tap set has chamfer lengths of 7-10 threads, 3-5 threads, and 1-2 threads, respectively.

 

Dormer E513 High-Speed Steel Straight Flute Tap Uncoated Bright Finish Round Shank With Square End Bottoming Chamfer M18-150 Thread Size Size M18-15 Model 96260

Dormer E513 High-Speed Steel Straight Flute Tap, Uncoated (Bright) Finish, Round Shank With Square End, Bottoming Chamfer, M18-1.50 Thread Size Size: M18-1.5 Model: 96260

Dormer E513 High-Speed Steel Straight Flute Tap, Uncoated (Bright) Finish, Round Shank With Square End, Bottoming Chamfer, M18-1.50 Thread Size Size: M18-1.5 Model: 96260 - Round shank with square end allows tap to be used in hand or power-driven applications. High-speed steel for compatibility with a variety of materials. Hand threading tap with straight flutes cuts threads in through holes and blind holes. Available in metric coarse (m) or metric fine (mf) right-hand thread options for different. Uncoated (bright) tools have no additional surface treatment or coating, suitable for.

 

GUHRING 9039370041660 Straight Flute Tap Mod Bottom Cobalt FIREX Coating 3 Flute 8-32 Size

GUHRING 9039370041660 Straight Flute Tap, Mod Bottom, Cobalt, FIREX Coating, 3 Flute, #8-32 Size

GUHRING 9039370041660 Straight Flute Tap, Mod Bottom, Cobalt, FIREX Coating, 3 Flute, #8-32 Size - Firex multi-layer coating provides hardness (tin) and heat resistance (tialn). Designed for efficiently threading blind holes. Cobalt material provides better wear resistance.

 

Dormer E513 High-Speed Steel Straight Flute Tap Uncoated Bright Finish Round Shank With Square End Bottoming Chamfer M14-100 Thread Size

Dormer E513 High-Speed Steel Straight Flute Tap, Uncoated (Bright) Finish, Round Shank With Square End, Bottoming Chamfer, M14-1.00 Thread Size

Dormer E513 High-Speed Steel Straight Flute Tap, Uncoated (Bright) Finish, Round Shank With Square End, Bottoming Chamfer, M14-1.00 Thread Size - Uncoated (bright) tools have no additional surface treatment or coating, suitable for general-purpose applications. Round shank with square end allows tap to be used in hand or power-driven applications. High-speed steel for compatibility with a variety of materials. Hand threading tap with straight flutes cuts threads in through holes and blind holes. Available in metric coarse (m) or metric fine (mf) right-hand thread options for different applications.

 

Dormer E500 High-Speed Steel Straight Flute Tap Uncoated Bright Finish Round Shank With Square End Taper Chamfer M8-125 Thread Size

Dormer E500 High-Speed Steel Straight Flute Tap, Uncoated (Bright) Finish, Round Shank With Square End, Taper Chamfer, M8-1.25 Thread Size

Dormer E500 High-Speed Steel Straight Flute Tap, Uncoated (Bright) Finish, Round Shank With Square End, Taper Chamfer, M8-1.25 Thread Size - Round shank with square end allows tap to be used in hand or power-driven applications. High-speed steel for compatibility with a variety of materials. Uncoated (bright) tools have no additional surface treatment or coating, suitable for general-purpose applications. Available in metric coarse (m) or metric fine (mf) right-hand thread options for different applications. Hand threading tap with straight flutes cuts threads in through holes and blind holes.

 

Morse Cutting Tools 33717 Optional Straight Flute Hand Taps High-Speed Steel Plug Type H2 Pitch Diameter 2 Flutes 4-40 Size

Morse Cutting Tools 33717 Optional Straight Flute Hand Taps, High-Speed Steel, Plug Type, H2 Pitch Diameter, 2 Flutes, #4-40 Size

Morse Cutting Tools 33717 Optional Straight Flute Hand Taps, High-Speed Steel, Plug Type, H2 Pitch Diameter, 2 Flutes, #4-40 Size - . Straight flute hand taps are used for hand tapping and machine tapping in through holes or blind holes in a wide variety of materials.

 

Dormer E513 High-Speed Steel Straight Flute Tap Uncoated Bright Finish Round Shank With Square End Bottoming Chamfer M10-050 Thread Size Size M10-05 Model 343135

Dormer E513 High-Speed Steel Straight Flute Tap, Uncoated (Bright) Finish, Round Shank With Square End, Bottoming Chamfer, M10-0.50 Thread Size Size: M10-0.5 Model: 343135

Dormer E513 High-Speed Steel Straight Flute Tap, Uncoated (Bright) Finish, Round Shank With Square End, Bottoming Chamfer, M10-0.50 Thread Size Size: M10-0.5 Model: 343135 - Round shank with square end allows tap to be used in hand or power-driven applications. Hand threading tap with straight flutes cuts threads in through holes and blind holes. Available in metric coarse (m) or metric fine (mf) right-hand thread options for different. Uncoated (bright) tools have no additional surface treatment or coating, suitable for. High-speed steel for compatibility with a variety of materials.

 

Morse Cutting Tools 33916 Straight Flute Hand Tap Sets High-Speed Steel Bright Finish H3 Pitch Diameter 3 Flutes 6-32 Size

Morse Cutting Tools 33916 Straight Flute Hand Tap Sets, High-Speed Steel, Bright Finish, H3 Pitch Diameter, 3 Flutes, #6-32 Size

Morse Cutting Tools 33916 Straight Flute Hand Tap Sets, High-Speed Steel, Bright Finish, H3 Pitch Diameter, 3 Flutes, #6-32 Size - Straight flute hand taps are used for hand tapping and machine tapping in through holes or blind holes in a wide variety of materials. .

 

Dormer E513 High-Speed Steel Straight Flute Tap Uncoated Bright Finish Round Shank With Square End Plug Chamfer M10-100 Thread Size

Dormer E513 High-Speed Steel Straight Flute Tap, Uncoated (Bright) Finish, Round Shank With Square End, Plug Chamfer, M10-1.00 Thread Size

Dormer E513 High-Speed Steel Straight Flute Tap, Uncoated (Bright) Finish, Round Shank With Square End, Plug Chamfer, M10-1.00 Thread Size - Round shank with square end allows tap to be used in hand or power-driven applications. Uncoated (bright) tools have no additional surface treatment or coating, suitable for general-purpose applications. Available in metric coarse (m) or metric fine (mf) right-hand thread options for different applications. High-speed steel for compatibility with a variety of materials. Hand threading tap with straight flutes cuts threads in through holes and blind holes.

 

Dormer E500 High-Speed Steel Straight Flute Tap Uncoated Bright Finish Round Shank With Square End Bottoming Chamfer M4-075 Thread Size Size M4-075 Model 160237

Dormer E500 High-Speed Steel Straight Flute Tap, Uncoated (Bright) Finish, Round Shank With Square End, Bottoming Chamfer, M4-0.75 Thread Size Size: M4-0.75 Model: 160237

Dormer E500 High-Speed Steel Straight Flute Tap, Uncoated (Bright) Finish, Round Shank With Square End, Bottoming Chamfer, M4-0.75 Thread Size Size: M4-0.75 Model: 160237 - Round shank with square end allows tap to be used in hand or power-driven applications. Hand threading tap with straight flutes cuts threads in through holes and blind holes. Available in metric coarse (m) or metric fine (mf) right-hand thread options for different. High-speed steel for compatibility with a variety of materials. Uncoated (bright) tools have no additional surface treatment or coating, suitable for.

 

Docooler 5 Pcsset M3-M8 Straight Groove Tap Hand Screw Tap with T-Handle Ratchet Tap Wrench Quality Bearing Steel Straight Flute Taps

Docooler® 5 Pcs/set M3-M8 Straight Groove Tap Hand Screw Tap with T-Handle Ratchet Tap Wrench Quality Bearing Steel Straight Flute Taps

Docooler® 5 Pcs/set M3-M8 Straight Groove Tap Hand Screw Tap with T-Handle Ratchet Tap Wrench Quality Bearing Steel Straight Flute Taps - Performed well in ordinary lathe, drilling and tapping machine of screw thread processing. Easy to operation even in narrow space. Adjustable t-handle for secure and firmly grip. Delicate workmanship, portable and easy to carry. It has a wrench and 5(m3, m4, m5, m6, m8) screw taps in a set.

 

Dormer E513 High-Speed Steel Straight Flute Tap Uncoated Bright Finish Round Shank With Square End Bottoming Chamfer M12-075 Thread Size

Dormer E513 High-Speed Steel Straight Flute Tap, Uncoated (Bright) Finish, Round Shank With Square End, Bottoming Chamfer, M12-0.75 Thread Size

Dormer E513 High-Speed Steel Straight Flute Tap, Uncoated (Bright) Finish, Round Shank With Square End, Bottoming Chamfer, M12-0.75 Thread Size - Available in metric coarse (m) or metric fine (mf) right-hand thread options for different applications. Hand threading tap with straight flutes cuts threads in through holes and blind holes. Round shank with square end allows tap to be used in hand or power-driven applications. Uncoated (bright) tools have no additional surface treatment or coating, suitable for general-purpose applications. High-speed steel for compatibility with a variety of materials.

 

TTC 3 Piece 4 Flute Left Hand High Speed Steel Tap Set Taperplug and bottoming Hand 12 High speed steel Left hand 20 Straight shank Straight flute

TTC 3 Piece 4 Flute Left Hand High Speed Steel Tap Set Taper,plug and bottoming Hand 1/2″ High speed steel Left hand 20 Straight shank Straight flute

TTC 3 Piece 4 Flute Left Hand High Speed Steel Tap Set Taper,plug and bottoming Hand 1/2″ High speed steel Left hand 20 Straight shank Straight flute - Includes (1) each of same available tap size taper, plug and bottoming. Use in wide variety of materials to create left hand threaded holes.

 

Dormer E500 High-Speed Steel Straight Flute Tap Uncoated Bright Finish Round Shank With Square End Bottoming Chamfer M3-050 Thread Size

Dormer E500 High-Speed Steel Straight Flute Tap, Uncoated (Bright) Finish, Round Shank With Square End, Bottoming Chamfer, M3-0.50 Thread Size

Dormer E500 High-Speed Steel Straight Flute Tap, Uncoated (Bright) Finish, Round Shank With Square End, Bottoming Chamfer, M3-0.50 Thread Size - Hand threading tap with straight flutes cuts threads in through holes and blind holes. Uncoated (bright) tools have no additional surface treatment or coating, suitable for general-purpose applications. High-speed steel for compatibility with a variety of materials. Available in metric coarse (m) or metric fine (mf) right-hand thread options for different applications. Round shank with square end allows tap to be used in hand or power-driven applications.

 

Dormer E500 High-Speed Steel Straight Flute Tap Uncoated Bright Finish Round Shank With Square End Taper Chamfer M6-100 Thread Size

Dormer E500 High-Speed Steel Straight Flute Tap, Uncoated (Bright) Finish, Round Shank With Square End, Taper Chamfer, M6-1.00 Thread Size

Dormer E500 High-Speed Steel Straight Flute Tap, Uncoated (Bright) Finish, Round Shank With Square End, Taper Chamfer, M6-1.00 Thread Size - Uncoated (bright) tools have no additional surface treatment or coating, suitable for general-purpose applications. Round shank with square end allows tap to be used in hand or power-driven applications. Hand threading tap with straight flutes cuts threads in through holes and blind holes. High-speed steel for compatibility with a variety of materials. Available in metric coarse (m) or metric fine (mf) right-hand thread options for different applications.

 

Drill America DWRRTP Series Qualtech High-Speed Steel Taper Pin Reamer Round with Square End Straight Flute Uncoated Bright Finish 20 Size Pack of 1

Drill America DWRRTP Series Qualtech High-Speed Steel Taper Pin Reamer, Round with Square End, Straight Flute, Uncoated (Bright) Finish, #2/0 Size (Pack of 1)

Drill America DWRRTP Series Qualtech High-Speed Steel Taper Pin Reamer, Round with Square End, Straight Flute, Uncoated (Bright) Finish, #2/0 Size (Pack of 1) - 01137-inches short end and 01462-inches large end. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Available in round shank with square end. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

 

Morse Cutting Tools 33728 Straight Flute Hand Taps High-Speed Steel Bright Finish Plug Type H3 Pitch Diameter 3 Flutes 6-32 Size

Morse Cutting Tools 33728 Straight Flute Hand Taps, High-Speed Steel, Bright Finish, Plug Type, H3 Pitch Diameter, 3 Flutes, #6-32 Size

Morse Cutting Tools 33728 Straight Flute Hand Taps, High-Speed Steel, Bright Finish, Plug Type, H3 Pitch Diameter, 3 Flutes, #6-32 Size - Straight flute hand taps are used for hand tapping and machine tapping in through holes or blind holes in a wide variety of materials. .

 

Cle-Force 1696 C69421 516-24 UNF Taper Chamfer Carbon Steel Hand Tap Straight Flute Straight with Square Shank Bright Uncoated Finish Pack qty 1

Cle-Force 1696 C69421 5/16-24 UNF Taper Chamfer Carbon Steel Hand Tap, Straight Flute, Straight with Square Shank, Bright (Uncoated) Finish (Pack qty. 1)

Cle-Force 1696 C69421 5/16-24 UNF Taper Chamfer Carbon Steel Hand Tap, Straight Flute, Straight with Square Shank, Bright (Uncoated) Finish (Pack qty. 1) - It requires less tapping torque because of more working teeth. The taper chamfer has the longest standard chamfer ensuring easier starting. Taper taps are commonly used in through holes. Cle-force 1696 5/16-24 unf taper chamfer carbon steel hand tap comes with a 7 to 10 thread chamfer.

 

Dormer E500 High-Speed Steel Straight Flute Tap Set Uncoated Bright Finish Round Shank With Square End 3-Piece Set 1 Each of Incomplete Profile Taper and Plug Chamfers 1 Standard Bottoming Chamfer M14-200 Thread Size

Dormer E500 High-Speed Steel Straight Flute Tap Set, Uncoated (Bright) Finish, Round Shank With Square End, 3-Piece Set (1 Each of Incomplete Profile Taper and Plug Chamfers, 1 Standard Bottoming Chamfer), M14-2.00 Thread Size

Dormer E500 High-Speed Steel Straight Flute Tap Set, Uncoated (Bright) Finish, Round Shank With Square End, 3-Piece Set (1 Each of Incomplete Profile Taper and Plug Chamfers, 1 Standard Bottoming Chamfer), M14-2.00 Thread Size - Available in metric coarse (m) or metric fine (mf) right-hand thread options for different applications. Hand threading tap set with straight flutes cuts threads in through holes and blind holes. Incomplete-profile taper and plug chamfer taps to cut full-size thread in gradual steps. Uncoated (bright) tools have no additional surface treatment or coating, for use on a broad range of materials. High-speed steel for compatibility with a variety of materials.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.