JET 692187 9 in. x 42 in. Step Pulley Mill with Newall DP500 DRO
- Large diameter quill is chromed. Certified meehanite castings. Precision bored and honed milling head. High precision class 7 spindle bearings. Spindle head is internally cooled.
V-Belt Pulley, 5/8″, 1.7″, 3-Step, 2, 3, 4″OD
- Price for each includes reducer bushing set screw included yes construction solid pulley bore dia 5/8″ or 1/2″ pulley bore type fixed bore pulley type stepped v-belt pulley for v-belt section 4l, a fits shaft dia 5/8″ or 1/2″ bushing required none pulley material die cast zamak 3 item v-belt pulley, 3-step pulley outside dia 200″, 300″, 400″. Number of grooves 3 country of origin (subject to change) united states.
5″ Diameter – 4 Step Pulley 1/2″ – 5/8″ Fixed Bore – Die Cast by Congress
- 3rd step = 4″. 1st step = 2″. 2nd step = 3″. 4th step = 5″. Fits 1/2″ & 5/8″ shaft, reducer bushing included.
JET 692194 9 in. x 42 in. Step Pulley Mill with Newall DP500 DRO with X-Axis Powerfeed
- High precision class 7 spindle bearings. Spindle head is internally cooled. Precision bored and honed milling head. Certified meehanite castings. Large diameter quill is chromed.
Palmgren 20″ 12-Speed Floor step pulley drill press
- Fully enclosed spindle with a maximum run out of 0005″ for accurate drilled holes. Rack and pinion table raiser. Rack and pinion table raiser easily positions the work piece and fixture at proper height. 12-speeds, digital depth and rpm readout, 6″ spindle travel.
CH Hanson Palmgren Machine 9680341 Radial Arm – 5 Speed Bench step pulley drill press
- Head tilts 90-degree right and left with spindle travel of 315-inch. Palmgren radial arm, 5 speed bench step pulley drill press. Swing depth from 9-inch to 33-inch (45-inch to 165-inch from spindle to column). Radial arm design with swing from 9 to 33″, tilting head and table.
4″ Diameter – 3 Step Pulley 1/2″ – 5/8″ Fixed Bore – Die Cast by Congress
- Fits 1/2″ & 5/8″ shaft, reducer bushing included. 1st step = 2″. 2nd step = 3″. Manufacture = congress. 3rd step = 4″.
JET 692190 9 in. x 42 in. Step Pulley Mill with 3-Axis Newall DP500 DRO (Quill)
- High precision class 7 spindle bearings. Precision bored and honed milling head. Large diameter quill is chromed. Spindle head is internally cooled. Certified meehanite castings.
Palmgren 20″ 16- Speed Floor step pulley drill press
- Work table height is adjustable using rack and pinion mechanism. 3/4-inch chuck and self-ejecting key are included. Digital readout displays spindle depth and spindle rpm. Other features include an enclosed ball bearing quill assembly, quick belt change and tension mechanism, positive quick adjust feed depth stop and a 1 1/2 hp, 1725 rpm motor. Work table surface is precision ground and features t-slots for secure, accurate mounting of work piece and also a coolant trough. 16 spindle speeds range from 120 to 3605 rpm for drilling steel, cast iron, aluminum, wood, and plastic. Table can be tilted 45-degree both right and left. The palmgren 20-inch floor model drill press features a heavy duty cast iron base, column collar, work table, and head.
JET 692188 9 in. x 42 in. Step Pulley Mill with Newall DP500 DRO with X-Axis Powerfeed
- Large diameter quill is chromed. Precision bored and honed milling head. High precision class 7 spindle bearings. Certified meehanite castings. Spindle head is internally cooled.
Step Pulley Mill Machine, 2 HP, 3 PH, 230 V
- . The internally cooled spindle head prevents seizing, and jet precision engineering ensures superior results with all the features you’ve come to expect and is backed by the industry-leading jet two year warranty. Three-stage power down feed with auto stop, high precision class 7 spindle bearings and the rugged stability of meehanite castings ensures you get everything you need from the jtm-1 and 2 models.
8×36 Step Pulley Milling Machine
- Precision bored and honed milling head high precision spindle bearings over 10″ of front to back ram travel large diameter quill is chromed locks on all movable surfaces hardened and ground precision table head tilts left or right equipped with one-shot lubrication system way covers draw bar tool box and tools.
JET 692192 9 in. x 42 in. Step Pulley Mill with 3-Axis Newall DP500 DRO (Quill) with X- and Y-Axis Powerfeed
- Precision bored and honed milling head. Large diameter quill is chromed. Spindle head is internally cooled. High precision class 7 spindle bearings. Certified meehanite castings.
V-Belt Pulley, 6 In OD, 5/8 Bore, 4 Step
- V-belt pulley, 4 step fixed bore, bore dia. Pitch dia. , 4 groove, die cast (zamak #3) material, for use with one 4l or a section v-belt per pair (or set), includes reducer bushing 3- and 4-step die-cast sheavesbore and grooves are machined together to provide high concentricity. Shaft. , Fits shaft dia. 15″ less than outside dia. 5/8 or 1/2 in. , Outside dia. Will fit a 5/8″ or 1/2″ dia. Use in pairs (1 inverted), in any combination, for effective speed regulation. Use only one 4l or a section v-belt per pair (or set). 5/8 or 1/2 in. 6, 5, 4, 3 in. Zamak/zinc alloy reducer bushing included solid construction. Is 0.
3 5/16″ – Diameter 3 Step Pulley 1/2″ – 5/8″ Fixed Bore – Die Cast by Congress
- Manufacture = congress. 1st step = 1 15/16″. 3rd step = 3 5/16″. 2nd step = 2 1/2″. Fits 1/2″ & 5/8″ shaft, reducer bushing included.
Palmgren 20″ 16- Speed Floor step pulley drill press
- Palmgren 20″ 12-speed floor step pulley drill press. Large diameter quill is chromed. Precision bored and honed milling head. Meehanite casting. High precision class 7 spindle bearings.
JET 692195 9 in. x 42 in. Step Pulley Mill with Newall DP500 DRO with X- and Y-Axis Powerfeeds
- Large diameter quill is chromed. Certified meehanite castings. Precision bored and honed milling head. Spindle head is internally cooled. High precision class 7 spindle bearings.
4 Diameter – 3 Step Pulley 1/2 – 5/8 Fixed Bore – Die Cast by Congress by CONGRESS DRIVES
- 12-speeds, digital depth and rpm readout, 6″ spindle travel. Rack and pinion table raiser easily positions the work piece and fixture at proper height. 4 diameter, 3 step pulley 1/2, 5/8 fixed bore, die cast by congress. Rack and pinion table raiser.
JET 692189 9 in. x 42 in. Step Pulley Mill with Newall DP500 DRO with X- and Y-Axis Powerfeed
- Spindle head is internally cooled. Precision bored and honed milling head. Large diameter quill is chromed. Certified meehanite castings. High precision class 7 spindle bearings.
4″ Diameter – 4 Step Pulley 1/2″ – 5/8″ Fixed Bore – Die Cast by Congress
- 4th step = 4″. 1st step = 2″. 3rd step = 3 3/8″. 2nd step = 2 5/8″. Fits 1/2″ & 5/8″ shaft, reducer bushing included.
Palmgren Radial Arm – 5 Speed Floor step pulley drill press
- Radial arm design with swing from 9 to 33″, tilting head and table. Head tilts 90-degree right and left with spindle travel of 315-inch. Keyed 5/8-inch chuck with jt3 taper with drilling capacity of 5/8-inch in case iron. Swing depth from 9-inch to 33-inch (45-inch to 165-inch from spindle to column).
Palmgren 9680158 Heavy Duty 16-Speed Bench Step Pulley Drill Press, 15″ Swing, 1/2 hp, 120/240V, 1 Phase
- Maximum spindle run out of 00005″. Quick change vertical depth stop for accurate, repeatable feed length. Led readout for spindle speeds. Fully enclosed spindle with spaced bearings for maximum spindle support and accurate drilling operations. Extended quill/spindle travel ideal for deep hole applications.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
