22 Best and Coolest Pipe Vises

 

RIDGID 36273 Model 460-6 Portable TRISTAND Chain Vise 18-inch to 6-inch Pipe Vise

RIDGID 36273 Model 460-6 Portable TRISTAND Chain Vise, 1/8-inch to 6-inch Pipe Vise

RIDGID 36273 Model 460-6 Portable TRISTAND Chain Vise, 1/8-inch to 6-inch Pipe Vise - Features a convenient lug to clamp the weld ground. Designed with an optimized base layout to maximize the working area. Large vise base overhangs the front legs for a clear tool swing. Rugged leg chain and durable tool tray withstand tough jobsite demands. Chain pipe vise has a 1/8-inch to 6-inch (3 mm to 150 mm) pipe capacity.

 

Palmgren Comb Bench pipe vise 5

Palmgren Comb. Bench & pipe vise, 5″

Palmgren Comb. Bench & pipe vise, 5″ - This palmgren vise is built for rugged service. Vise is equipped with one plain jaw and one horizontally/vertically grooved jaw plate for holding round pieces. With palmgren’s 11255 you can solve all angle problems, dispense with clamps or wedges, and get a quick, accurate and positive set-up in a few seconds on your drill press, milling machine or grinder. Made of finest materials, and accurately machined to secure quick set-ups for precision work at any desired angle up to 90. Can also be used like an ordinary vise when lowered to the horizontal position.

 

Shop Fox D4095 2-Inch Pipe Capacity Pipe Vise

Shop Fox D4095 2-Inch Pipe Capacity Pipe Vise

Shop Fox D4095 2-Inch Pipe Capacity Pipe Vise - If you cut or thread a lot of pipe, this cast iron 2-inch diameter pipe vise is made for you. Quick release mechanism secures pipe in no time. . Simple bolt-on installation for workbenches and work stands.

 

Yost Vises 465 65 Combination Pipe and Bench Vise

Yost Vises 465 6.5″ Combination Pipe and Bench Vise

Yost Vises 465 6.5″ Combination Pipe and Bench Vise - Rubber washers prevent the handle from unwanted sliding. Bench-mount vise with 65″ nominal jaw width and 0125″- to 25″-diameter pipe capacity provides clamping action for light-duty applications. Vise has a cast iron body with steel u-channel bar for durability and has a flat portion that acts as an anvil and additional work surface. 360-degree swivel base adjusts the direction of the jaws for proper placement and locks in place. Replaceable top jaws and permanent pipe jaws are grooved for enhanced grip.

 

HFS Tm PIPE VISE 3 CAPACITY

HFS (Tm) PIPE VISE 3″ CAPACITY

HFS (Tm) PIPE VISE 3″ CAPACITY - This hinged pipe vise can handle any size pipe from 1/2 ” up to 4. 5″. . The locking hinge makes it easy to insert and remove long pipes without the need to feed through through. Hfs also offers affordable pipe threading machines to match this vise. The wide threads on the lock-down screw provide plenty of torque to hold the pipe in place whether you’re cutting or threading. Painted in a bright fire-engine red so you cant “lose it” in your shop.

 

Ridgid 40220 Straight Pipe Welding Vise

Ridgid 40220 Straight Pipe Welding Vise

Ridgid 40220 Straight Pipe Welding Vise - This item is 40220 vise, 461 straight welding. Model #461. This product manufacture by united states. Capacity 1/2-inch to 8-inch. Made of durable performance-proven material and designed to resist strain, heat and warpage during tacking. Machined swivel nuts and pins, together with special chain screws, give smooth and trouble-free assembling of the vise onto pipe. This product is used for pin-vises. Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.

 

Wheeler Rex Floor Model Pipe Vises Capacity 34 - 20 18 - 500mm

Wheeler Rex Floor Model Pipe Vises: Capacity: 3/4″ – 20″ (18 – 500mm)

Wheeler Rex Floor Model Pipe Vises: Capacity: 3/4″ – 20″ (18 – 500mm) - Floor model pipe vises capacity 3/4″, 20″ (18, 500mm). Adjustments are fast to accommodate different pipe sizes 850 shown collapsed. Pipe vises are designed to be portable and quickly assembled for field use, yet strong and tough. Quickreleasing chain provides positive gripping power evenly around the pipe and prevents damage. All models have a maximum 2000 lb (900kg) capacity.

 

Reed Tool 4CA Combination Bench and Pipe Vise 18 to 6-Inch Pipe Capacity

Reed Tool 4CA Combination Bench and Pipe Vise, 1/8 to 6-Inch Pipe Capacity

Reed Tool 4CA Combination Bench and Pipe Vise, 1/8 to 6-Inch Pipe Capacity - Designed to provide decades of service, these cast combination bench & pipe vises carry reed’s lifetime warranty. Combination vises are designed with maximum throat depth for greater clamping action to hold large parts. Forged steel, geared clamp bolt on swivel base maintains positive lock to avoid slippage under heavy pressure. Steel pipe jaws made of heat-treated, hardened steel are reversible and replaceable, and jaw facings are replaceable, too. Only reed has backed up its bench vises with a lifetime warranty for over 110 years. This yields long jaw life.

 

Reed Tool 64 Yoke Pipe Vise 14 to 6-Inch

Reed Tool 64 Yoke Pipe Vise, 1/4 to 6-Inch

Reed Tool 64 Yoke Pipe Vise, 1/4 to 6-Inch - Only reed makes yoke vises in 8″ and 12″ capacities. Yoke and base made of strong, dependable iron. Four points of contact for the jaws to grip the pipe. Solidly built, and provide a powerful grip. Built to meet the demands of pipe fitting and threading operations.

 

Yost High-Visibility All Steel Utility Combination Pipe and Bench Vise - 4in Jaw Width Model 14904

Yost High-Visibility All Steel Utility Combination Pipe and Bench Vise – 4in. Jaw Width, Model# 14904

Yost High-Visibility All Steel Utility Combination Pipe and Bench Vise – 4in. Jaw Width, Model# 14904 - ) 4. The yost high-visibility all steel utility combination pipe and bench vise conforms to osha specification #1910. Vise is painted safety yellow to alert of potential pinch points. ) 2 1/4, double lock-downs yes, jaw width (in. High-visibility all steel vise is economically priced for various less demanding applications. 360deg swivel base yes, jaw capacity (in. The 360deg swivel base features two 2 lockdowns. The entire vise is constructed using structural cast steel. ) 4, pipe jaw yes, replaceable jaw yes, jaw depth (in. The bar covers the continuous rolled main screw. Equipped with replaceable hardened steel serrated jaws and built-in pipe jaws. 144, safety color standards.

 

Yost BC-6 6 Inch Bench Chain Pipe Vise

Yost BC-6 6 Inch Bench Chain Pipe Vise

Yost BC-6 6 Inch Bench Chain Pipe Vise - The vise is designed to grip 1/4 inch, 6 inch diameter pipes. The vise is constructed from heavy duty cast iron. Yost bc-6 model is a 6 inch chain vise. The vise also features 1/2 inch bending shoes.

 

Pipe Threader Ratchet Type With 5 Dies  Pipe Cutter  2  Clamp On Pipe Vise 1

Pipe Threader Ratchet Type With 5 Dies + Pipe Cutter # 2 + Clamp On Pipe Vise #1

Pipe Threader Ratchet Type With 5 Dies + Pipe Cutter # 2 + Clamp On Pipe Vise #1 - Alloy steel rollers wheels align for cleaner cuts high grade malleable castings . Type handle plastic carry case . Pipe cutter no 2 pipe diameter capacity from 1/2 up to 2″ hardened”. Pipe threader ratchet type with 5 dies set 3/8“ 1/2“ 3/4“ 1“ 1-1/4“ ratchet. Pipe threader ratchet type with 5 dies + pipe cutter # 2 + clamp on pipe vise #1 tool kit 1.

 

Palmgren 9629748 Combination Bench and Pipe Vise 8 Jaw Width x 8-14 Jaw Opening

Palmgren 9629748 Combination Bench and Pipe Vise, 8″ Jaw Width x 8-1/4″ Jaw Opening

Palmgren 9629748 Combination Bench and Pipe Vise, 8″ Jaw Width x 8-1/4″ Jaw Opening - A 360 degree swivel base with dual lock downs and 4 point mounting holes deliver secure, safe clamping. These vises can be used in indoor and outdoor applications. The vise spindle and nut are totally enclosed in a square tube casting that protects them from dust, chips and moisture, keeping them lubricated for life. Specifications model p748 jaw width 8″ jaw opening 8- 1/4″ throat depth 4- 3/4″ pipe jaw capacities 1/4, 3-1/2″. The body is heavier and made of 65,000 psi ductile alloy stress parts. Sealed construction straight line pull power tunnel design precision fit slide bar to 0. They’re practically indestructible and are 70% stronger than the competitive u-shaped styles. It is ideal for maintenance applications, tool and die shops, fabrication shops, automotive garages, tradesmen and construction sites. 003″ large anvil 360 degree swivel base with dual lock downs. Reinforced large anvils are designed to handle additional non-clamping applications. Palmgren combination bench and pipe vise houses a super strong power tunnel with straight-line pull that assures a lifetime spindle and nut never to wear out. A precision fit of the slide bar eliminates side play and jaw wobble even when clamping with the jaws wide open. These vises have the throat depth to meet the toughest job requirements and come with both hardened and replaceable steel serrated jaws and pipe jaws.

 

41020 Vise Jaw set Fits RIDGID Â E1230 450 460 TRISTAND Â Pipe Vise

41020 Vise Jaw set Fits RIDGID ® E1230 450 460 TRISTAND ® Pipe Vise

41020 Vise Jaw set Fits RIDGID ® E1230 450 460 TRISTAND ® Pipe Vise - Pt® replaces ridgid® part 41020 e1230 fits ridgid 460 and 450. Also fits ridgid bc410 bench vise fix your ridgid vise. The alternative to buying a brand new ridgid tristand. After-market parts for your rigid stand. Reliable vendor of parts for your ridgid tri stand.

 

Wilton 10200 C-0 Combination Pipe And Bench Vises-Swivel Base 3-12-Inch Jaw Width 5-Inch Jaw Opening 4-12-Inch Throat Depth

Wilton 10200 C-0, Combination Pipe And Bench Vises-Swivel Base, 3-1/2-Inch Jaw Width, 5-Inch Jaw Opening, 4-1/2-Inch Throat Depth

Wilton 10200 C-0, Combination Pipe And Bench Vises-Swivel Base, 3-1/2-Inch Jaw Width, 5-Inch Jaw Opening, 4-1/2-Inch Throat Depth - Locking swivel base with double lockdowns for non-slip hold in any position. Self-centering pipe jaws-hardened steel jaws hold up to 25-inch pipe safely and securely. Enclosed construction keeps lubrication in and contaminants out.

 

Wilton Columbian Combination Pipe Bench Vises - 204-12-m3 combination machinist pipe vise

Wilton Columbian Combination Pipe & Bench Vises – 204-1/2-m3 combination machinist & pipe vise

Wilton Columbian Combination Pipe & Bench Vises – 204-1/2-m3 combination machinist & pipe vise - Dimensions overall product weight -61 pounds. -Base type swivel. -Swivel base rotates 360º and gear lock bolt ensures positive locking against slippage. -pipe jaws are interchangeable and reversible, they do not protrude beyond the jaw faces, so other work can be held without removing pipe jaws. 825-10404 features -hardened steel jaw faces have deep knurled pattern which ensures strength and longevity. Product type -clamps/vises.

 

Wilton 10225 C-1 4-12-Inch Jaw Width by 6-Inch Opening Combination Pipe and Bench Vise

Wilton 10225 C-1 4-1/2-Inch Jaw Width by 6-Inch Opening Combination Pipe and Bench Vise

Wilton 10225 C-1 4-1/2-Inch Jaw Width by 6-Inch Opening Combination Pipe and Bench Vise - Both the main and pipe jaws are made from high strength steel and are fully replaceable. For ultimate versatility, the pipe & bench vise is equipped with main jaws, pipe jaws and a machined anvil work surface. A mounting template is included for quick no-guess hole placement for mounting. U. Vise is also equipped with a swivel base with dual locking nuts which allows for a full 360deg of rotation. Unlike most vises that have a fixed center nut, the pipe & bench round channel vise nut is anchored at the rear, which provides straight line pull and even pressure resulting in greater durability. ) 5/8, 360deg swivel base yes, double lock-downs yes. ) 6, (1/8-3 1/2 pipe), jaw width (in. Pipe jaw yes, jaw capacity (in. Self-centering pipe jaws are grooved to prevent rotation of round stock and have a two-step design to assure a firm hold of up to 6in. Of pipe safely and securely. A. S. The wilton pipe & bench vise is designed to handle the most demanding clamping applications. ) 4 1/2, replaceable jaw yes, serrated, jaw depth (in. Round channel design also allows for a completely enclosed spindle and nut assembly which keeps debris out and lubrication in for a lifetime of smooth operation. Both the locking nuts and base have serrated edges that interact positively to assure a nonslip grip when tightened. Main base has four precast holes for mounting the vise to a work surface.

 

Steel Dragon Tools 41015 Screw Handle fits RIDGID 450 460 TRISTAND Chain Vise Pipe Stand

Steel Dragon Tools 41015 Screw Handle fits RIDGID 450 460 TRISTAND Chain Vise Pipe Stand

Steel Dragon Tools 41015 Screw Handle fits RIDGID 450 460 TRISTAND Chain Vise Pipe Stand - The trade dress of the tristand is a trademark of ridgid® , inc. Steel dragon tools® 41015 screw handle fits ridgid® 450 460 tristand® chain vise pipe stand replacement handle for chain vises fits sdt/ridgid® 460 chain visereplaces ridgid® part 41015also compatible with the following ridgid® chain vise models 425, 450, 560, 640, bc-410, bc-410-p and bc-510 tristand is a trademark of ridgid® , inc.

 

RIDGID 450 Portable TRISTAND Chain Pipe Vise 18-5 Capacity 40222 Certified Refurbished

RIDGID 450 Portable TRISTAND Chain Pipe Vise 1/8-5″ Capacity 40222 (Certified Refurbished)

RIDGID 450 Portable TRISTAND Chain Pipe Vise 1/8-5″ Capacity 40222 (Certified Refurbished) - Each item is then checked for quality and tested. Integral legs and tray fold in for easy carrying and setup. Sdt reconditioned ridgid ® 450 portable tristand ® chain pipe vise 1/8-5″ capacity 40222our reconditioned ridgid® 40222 450 portable tristand® chain vise are gone through with a fine tooth comb, taken apart, degreased, cleaned, sandblasted, painted, and reassembled. Large vise base overhangs front legs for clear tool swingslots for hanging tools, pipe rest, three-pipe benders, and ceiling brace screwmodel 450 features a larger work surface with capacity 1/8″, 5″.

 

Ridgid 40130 Portable Tristand Yoke Pipe Vise

Ridgid 40130 Portable Tristand Yoke Pipe Vise

Ridgid 40130 Portable Tristand Yoke Pipe Vise - Large vise base overhangs front legs for clear tool swing. This item is 40130 vise, 40a tristand yoke. Complete with slots for hanging tools, pipe rest, three-pipe benders and ceiling brace screw. This product is used for pipe-cutters. This product manufacture by united states. Integral legs and tray fold in for easy carrying and setup. Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool. Model 40-a.

 

RIDGID 36278 Model 460-12 Portable TRISTAND Chain Vise 18-inch to 12-inch Pipe Vise

RIDGID 36278 Model 460-12 Portable TRISTAND Chain Vise, 1/8-inch to 12-inch Pipe Vise

RIDGID 36278 Model 460-12 Portable TRISTAND Chain Vise, 1/8-inch to 12-inch Pipe Vise - Designed with an optimized base layout to maximize the working area. Rugged leg chain and durable tool tray withstand tough jobsite demands. Features a convenient lug to clamp the weld ground. Chain pipe vise has a 1/8-inch to 12-inch (3 mm to 300 mm) pipe capacity. An adjustable rear leg provides stability and allows you to level the pipe.

 

HFS Tm PIPE VISE 1 CAPACITY

HFS (Tm) PIPE VISE 1″ CAPACITY

HFS (Tm) PIPE VISE 1″ CAPACITY - Painted in a bright fire-engine red so you cant “lose it” in your shop. This hinged pipe vise can handle any size pipe from 1/8th” up to 1-1/2″. The wide threads on the lock-down screw provide plenty of torque to hold the pipe in place whether you’re cutting or threading. The locking hinge makes it easy to insert and remove long pipes without the need to feed through through. Hfs also offers affordable pipe threading machines to match this vise.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.