CMT 196.506.11 Solid Carbide Downcut Spiral Bit & Chipbreaker, 1/2-Inch Diameter
- Premium quality solid carbide, excellent finish on the workpiece upper side downward chip ejection. Also for use on hand-held routers equipped with chucks or adaptors. 1-1/2-inch cutting length, 3 cutting edges, max tooth depth 03mm. For use on machining centers, point to point machines, cnc routers. For cutting, copying, sizing and routing wood products, plastic & laminates.
Eagle America 106-0252 Solid Carbide Spiral Downcut Router Bit 1/8-Inch Diameter 1/4-Inch Shank
- Ideal for fine finish work such as veneers, laminates, inlays and repairs because they prevent upper edge tear outs. Use down-cuts for trimming and sizing. Our production quality spiral bits combine effective chip removal with a continuous shearing action cut not obtained from a standard straight bit. 1/8-inchdiameter, 1/2-inch cut length, 2-inch overall length, 1/4-inch shank. All bits two flute, solid carbide. Use for pattern cutting or when going completely through the board as it allows clear vision of the cutting line. You’ll get smoother cutting action with better results. Usa down-cut bits cut slower and push chips away from the router to eliminate top surface splintering.
LMT Onsrud 57-280 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 2.5000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter
- Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Double flute, 30 degree angle.
CMT 190.515.11 Solid Carbide Up/Downcut Spiral Mortising Bit, 1/2-Inch
- 7/8-inch cutting length,13/64-inch minor cutting length, 3-inch overall length. Premium quality solid carbide excellent finish on both the workpiece upper/lower side. Also for use on hand-held routers equipped with chucks or adaptors. 2+2 cutting edges for cutting, copying, sizing and routing wood products, plastic & laminates. For use on machining centers, point to point machines, cnc routers.
LMT Onsrud 57-365 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.5000″ Overall Length, 0.5000″ Cutting Diameter, 0.5000″ Shank Diameter
- Double flute, 30 degree angle. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
LMT Onsrud 62-762 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.2500″ Shank Diameter
- Round shanks allow use with a wide variety of toolholding systems. One flute, 21 degree angle. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
LMT Onsrud 62-718 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1875″ Cutting Diameter, 0.2500″ Shank Diameter
- Round shanks allow use with a wide variety of toolholding systems. One flute, 21 degree angle. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
LMT Onsrud 60-242 Solid Carbide Downcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter
- Round shanks allow use with a wide variety of toolholding systems. Designed for perfect balance and ultra smooth finish over a wide speed range. Three flute, 10 degree angle. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
StewMac Carbide Downcut Inlay Router Bit, 3/64″ (1.19mm) diameter
- Solid carbide lasts far longer than steel. Reverse spiral flutes cut downward for cleaner, “no fuzz” edges in routed cavities. For fine detail inlay routing. Length 1-1/2″ (3810mm), shank diameter 1/8″ (318mm). Comes in sturdy protective case, with bit cutting diamater size clearly marked.
CMT 363.050.22 XTreme Solid Carbide Twist Drill 120° downcut round sharpening, 5mm (13/64-Inch), Left-Hand Rotation
- Right-hand rotation. Shank correspons to cutting diameter. Made of premium quality solid tungsten carbide and featuring 2 precision ground cutting edges and 2 spiral flutes. Xtreme twist drill featuring downcut round sharpening to be used in adapter bushings.
Upcut & Downcut Spiral Router Bits – SHK 1/4 | CD 5mm | CL 3/4 | OL 2 | SRD
- Note solid carbide is not guaranteed against breakage. Select your item(s) then click add to cart. Industrial quality cutting bits for plastics or woods manufactured in the usa by southeast tool. Southeast tool’s micro-grain solid carbide spiral router bits are excellent quality spiral bits. Use in your cnc machine, router table, or hand-held router. Choose either the upcut spiral or downcut spiral with 1, 2, and 3 flutes as shown in the table below. Note sru in the description means it is an upcut bit and srd in the description means it is a downcut bit. Legend below explains sizing.
LMT Onsrud 57-287 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. Double flute, 30 degree angle. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
Amana 46404 SC SPIRAL DOWNCUT 2″ CL 2 BB
- Cutting diameter 1/2-inch. Solid carbide, industrial quality. Solid carbide. 1-5/8-inch cutting height.
CMT 190.517.11 Solid Carbide Up/Downcut Spiral Mortising Bit, 1/2-Inch
- For use on machining centers, point to point machines, cnc routers. 2+2 cutting edges for cutting, copying, sizing and routing wood products, plastic & laminates. Also for use on hand-held routers equipped with chucks or adaptors. Premium quality solid carbide excellent finish on both the workpiece upper/lower side. 1-3/8-inch cutting length,13/64-inch minor cutting length, 3-1/2-inch overall length.
StewMac Carbide Downcut Inlay Router Bit, 1/32″ (0.79mm) diameter
- Comes in sturdy protective case, with bit cutting diamater size clearly marked. Reverse spiral flutes cut downward for cleaner, “no fuzz” edges in routed cavities. For fine detail inlay routing. Solid carbide lasts far longer than steel. Length 1-1/2″ (3810mm), shank diameter 1/8″ (318mm).
LMT Onsrud 62-725 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.5000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. One flute, 21 degree angle.
LMT Onsrud 64-025 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 25 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Single flute, 21 degree angle. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
CMT 192.505.11 Solid Carbide Downcut Spiral Bit, 1/2-Inch Diameter by 3-Inch Length, 1/2-Inch Shank
- Premium quality solid carbide, excellent finish on the workpiece upper side downward chip ejection. For use on machining centers, point to point machines, cnc routers. Also for use on hand-held routers equipped with chucks or adaptors. 1-1/4-inch cutting length, 2 cutting edges, right-hand rotation. For cutting, copying, sizing and routing wood products, plastic & laminates.
Downcut Cobalt Jigsaw Blade
- Cobalt steel (bi-metal) maximizes blade life and durability. Precision ground teeth stay sharper longer and deliver smooth, clean cuts. Deeper gullets with increased free space remove more material for faster cutting. T-shank design fits all bosch and dewalt® jig saws.
CMT 192.501.11 Solid Carbide Downcut Spiral Bit, 5/16-Inch Diameter by 3-Inch Length, 1/2-Inch Shank
- Premium quality solid carbide, excellent finish on the workpiece upper side downward chip ejection. For cutting, copying, sizing and routing wood products, plastic & laminates. Also for use on hand-held routers equipped with chucks or adaptors. For use on machining centers, point to point machines, cnc routers. 1-inch cutting length, 2 cutting edges, right-hand rotation.
LMT Onsrud 57-240 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.2500″ Shank Diameter
- Double flute, 30 degree angle. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems.
CMT 192.507.11 Solid Carbide Downcut Spiral Bit, 1/2-Inch Diameter by 4-Inch Length, 1/2-Inch Shank
- Premium quality solid carbide, excellent finish on the workpiece upper side downward chip ejection. For cutting, copying, sizing and routing wood products, plastic & laminates. For use on machining centers, point to point machines, cnc routers. 2-inch cutting length, 2 cutting edges right-hand rotation. Also for use on hand-held routers equipped with chucks or adaptors.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
